Al-Si ALAŞIMLARINDA SİLİSYUM MİKTARININ DÖKÜM PARÇA-KALIP ARAYÜZEY ISI TRANSFER KATSAYISI ÜZERİNE ETKİSİ

Öz

Bu çalışmanın amacı katılaşma süresince su soğutmalı bakır soğutucu üzerinde tek yönlü dikey olarak katılaşanAl-Si alaşımlarında silisyum içeriğinin arayüzey ısı transferi katsayısına etkisini incelemektir. Arayüzey ısıtransfer katsayısı silisyum içeriğine bağlı olarak, Sonlu Farklar Metoduna dayalı FORTRAN programı ilebelirlenmiştir. Sonuç olarak; arayüzey ısı transfer katsayısı silisyum içeriğinin azalması ile artmıştır, maksimumarayüzey ısı transfer katsayısı değerleri; %7Si’de 8900 W/m2K, %5Si’de 14600 W/m2K ve %3Si’de 19100W/m2K olarak elde edilmiştir.

Anahtar Kelimeler

• Döküm-kalıp arayüzeyi, Al-Si alaşımları, ısı transfer katsayısı, sonlu farklar metodu.

Kaynakça

1. Şahin, H.M., Kocatepe, K., Kayıkcı R. ve Akar,
2. N., “Determination of Unidirectional Heat
3. Transfer Coefficient during Unsteady State
4. Solidification at Metal Chill Interface”, Energy
5. Conversion and Management, 47, 19–34, 2006.
6. Şahin, H.M., Kocatepe, K., Kayıkcı R. ve Akar,
7. N., “Ötektik Al-Si Alaşımında Soğutucu Yüzey
8. Pürüzlülüğünün Arayüzey Isı Transfer

9. Katsayısına Etkisi”, Gazi Üniversitesi
10. Mühendislik-Mimarlık Fakültesi Dergisi, Cilt
11. , No 3, 473-481, 2006.
12. Kim, T.G. ve Lee, Z.H., “Time-varying Heat
13. Transfer Coefficients Between Tube-Shaped
14. Casting and Metal Mold”, International Journal
15. of Heat and Mass Transfer, 40, 3513-3525,
16. -
17. Lee, Z.H., Kim, T.G. ve Choi, Y.S., “The
18. Movement of the Concave Casting Surface
19. during Mushy-Type Solidification and Its Effect
20. on the Heat-Transfer Coefficient”, Metallurgical
21. and Materials Transactions B, 29, 1051-1056,
22. -
23. Fortin, G, Louchez, P. ve Samuel, F H, “Factors
24. Controlling Heat Transfer Coefficients at the
25. Metal-Mold Interface during Solidification of
26. Aluminum Alloys: An Analytical Study”, AFS
27. Transactions, 100, 863-871, 1992.
28. Hao, S.W., Zhang, Z.Q., Chen, J.Y., ve Liu, P.C.,
29. “Heat Transfer at the Metal-Mold Interface in
30. Ductile Iron”, AFS Transactions, 95, 601-608,
31. -
32. Sharma, D.G.R. ve Krishnan, M., “Simulation of
33. Heat Transfer at Casting Metal-Mold Interface“,
34. AFS Transactions, 99, 429-438, 1991.
35. Taha, M.A., El-Mahallawy, N.A., El-Mestekawi,
36. M.T. ve Hassan A.A., “Estimation of Air Gap
37. and Heat Transfer Coefficient at Different Faces
38. of Al And Al-Si Castings Solidifying in
39. Permanent Mould”, Materials Science And
40. Technology, 17, 1093-1101, 2001.
41. Santos, C.A., Quaresma, J.M.V. ve Garcia, A.,
42. “Determination of Transient Interfacial Heat
43. Transfer Coefficients in Chill Mold Casting”,
44. Journal of Alloys and Compounds, 319, 174-
45. , 2001.
46. Santos, C.A., Siqueira, C.A., Garcia, A.,
47. Quaresma, J.V.M. ve Spim, J.A., “Metal/Mold
48. Heat Transfer Coefficients during Horizontal and
49. Vertical Unsteady-State Solidification of Al-Cu
50. and Sn-Pb Alloys”, 4th International
51. Conference on Inverse Problems in
52. Engineering, Rio de Janeiro, Brazil, 2002.
53. Siqueira, C.A., Cheung, N. ve Garcia, A., “The
54. Columnar To Equiaxed Transition During
55. Solidification of Sn–Pb Alloys”, Journal of
56. Alloys and Compounds, 351, 126–134, 2003.
57. Peres, M.D., Siqueira, C.A. ve Garcia, A.,
58. “Macrostructural and Microstructural
59. Development in Al–Si Alloys Directionally
60. Solidified under Unsteady-State Conditions”,
61. Journal of Alloys and Compounds, 381,168–
62. , 2004.
63. Santos, C.A., Siqueira, C.A.,Garcia, A.,
64. Quaresma, J.M.V. ve Spim, J.A., “Metal–Mold
65. Heat Transfer Coefficients during Horizontal and
66. Vertical Unsteady-State Solidification of Al–Cu
67. and Sn–Pb Alloys”, Inverse Problems in
68. Science and Engineering, 12, 279–296,2004.
69. Sá, F., Rocha, O.L., Siqueira, C.A. ve Garcia, A.,
70. “The Effect of Solidification Variables on
71. Tertiary Dendrite Arm Spacing in Unsteady-State
72. Directional Solidification of Sn–Pb and Al–Cu
73. Alloys”, Materials Science and Engineering A,
74. , 131–138 ,2004.
75. Spinelli, J.E., Rosa, D.M., Ferreira, I.L. ve
76. Garcia, A., “Influence of Melt Convection on
77. Dendritic Spacing of Downward Unsteady-State
78. Directionally Solidified Al–Cu Alloys”,
79. Materials Science and Engineering A, 383,
80. –282, 2004.
81. Souza, E. N., Cheung, N. ve Garcia, A., “The
82. Correlation Between Thermal Variables and
83. Secondary Dendrite Arm Spacing During
84. Solidification of Horizontal Cylinders of Sn–Pb
85. Alloys” Journal of Alloys and Compounds,
86. , 110-117, 2005.
87. Muojekwu, C.A., Samarasekera, I.V. ve
88. Brimacombe, J.K., “Heat Transfer and
89. Microstructure during The Early Stages of Metal
90. Solidification”, Metallurgical and Materials
91. Transactions B, 26, 361-382, 1995.
92. Michel, F., Louchez, P. R. ve Samuel, F. H.,
93. “Heat Transfer Coefficient during Solidification
94. of Al-Si Alloys: Effects of Mold Temperature,
95. Coating Type and Thickness”, AFS
96. Transactions, 103, 275-283, 1995.
97. Krishnan, M. ve Sharma, D.G.R., “Determination
98. of Heat Transfer Coefficient between Casting and
99. Chill in Unidirectional Heat Flow”, AFS
100. Transactions, 102, 769-774, 1994.
101. Krishnan, M. ve Sharma, D.G.R., “The Effect of
102. Alloy Properties on the Heat Flow across the
103. Casting-Mold Interface”, Scripta Metallurgica
104. et Materialia, 28, 447-451, 1993.
105. Narayan Prabhu, K. ve Ravishankar, B.N.,
106. “Effect of Modification Melt Treatment on
107. Casting/Chill Interfacial Heat Transfer and
108. Electrical Conductivity of Al-/13% Si Alloy”,
109. Materials Science and Engineering A, 360,
110. -298, 2003.
111. Suly, L.J.D., “The Thermal Interface between
112. Casting and Chill Moulds”, AFS Transactions,
113. , 735-744, 1976.
114. Prabhu, K.N. ve Griffiths, W.D., “Assessment of
115. Metal/Mould Interfacial Heat Transfer during
116. Solidification of Cast Iron” Third International
117. Conference on Solidification and Gravity,
118. Miskolc, Hungary, 455-461, 1999.
119. Lau, F., Lee, W.B., Xiong, S.M. ve Liu, B.C., “A
120. Study of The Interfacial Heat Transfer between
121. an Iron Casting and a Metallic Mould”, Journal
122. of Materials Processing Technology, 79, 25–29,
123. -
124. Broucaret, S., Michrafy, A. ve Dour, G., “Heat
125. Transfer and Thermo-Mechanical Stresses in a
126. Gravity Casting Die Influence of Process
127. Parameters”, Journal of Materials Processing
128. Thecnology, 110, 211-217, 2001.
129. Hallam, C.P. ve Griffiths, W.D.,”A Model of the
130. Interfacial Heat-Transfer Coefficient for the
131. Aluminum Gravity Die-Casting Process”,
132. Metallurgical and Materials Transactions B;
133. , 721-733, 2004.
134. Gozlan, E. ve Bamberger, M., “Heat Flow and
135. Solidification in A Metal Mould” Zeitschrift für
136. Metallkunde, 78, 677-682, 1987.
137. Srinivasan, M.N., “Heat Transfer Coefficients at
138. the Casting-mould Interface during Solidification
139. of Flake Graphite Cast Iron in Metallic Moulds”,
140. Indian Journal of Technology, 20, 123-129,
141. -
142. Hallam, C.P., Griffiths, W.D. ve Butler, N.D.,
143. “Interfacial Heat Transfer between A Solidifying
144. Aluminum Alloy and A Coated Die Steel”,
145. Materials Science Forums, 329-330, 467-472,
146. -
147. Ho, K. ve Pehlke, R D ; “Mechanisms of Heat
148. Transfer at A Metal-Mold Interface”; AFS
149. Transactions, 92, 587-598, 1984.
150. Hou, T.X. ve Pehlke, R.D., “Determination of
151. Mold-Metal Interfacial Heat Transfer and
152. Simulation of Solidification of An Al-%13 Si
153. Casting”, AFS Transactions, 96, 129-136, 1998.
154. Ho, K. ve Pehlke, R.D., “Transient Methods for
155. Determination of Metal-Mold Interfacial Heat
156. Transfer”, AFS Transactions, 91, 689-698,
157. -
158. Nishida, Y., Droste, W. ve Engler, S., “The Airgap
159. Formation Process at the Casting-Mold
160. interface and the Heat Transfer Mechanism
161. Through the Air-gap”, Met. Transactions B, 17,
162. -844, 1986.
163. Liu, W., Wang G X., ve Matthys, E.F., “Thermal
164. Analysis and Measurements for A Molten Metal
165. Drop Impacting on A Substrate, Cooling,
166. Solidification and Heat Transfer Coefficient”,
167. International Journal of Heat and Mass
168. Transfer, 38, 1387-1395 ,1995.
169. Trovant, M. ve Argyropoulos, S.A., “The
170. Implementation of A Mathematical Model To Characterize Mold Metal Interface Effects in
171. Metal Casting”, Canadian Metallurgical
172. Quarterly, 37, 185-196, 1998.
173. Parker, J.K. ve Piwonka, T.S., “Gap Formation in
174. Resin-Bonded Molds”, AFS Transactions, 108,
175. -245, 2000.
176. Hwang, J.C., Chuang, H.T., Jong, S.H. ve
177. Hwang, W.S., “Measurement of Heat Transfer
178. Coefficient at Metal-Mold Interface during
179. Casting”, AFS Transactions, 102, 877-883,
180. -
181. Coates, BL., Heat Transfer of the Casting
182. Metal/Mold Interface during Solidification,
183. PhD Thesis, Graduate Department of Materials
184. Science and Engineering, University of Toronto,
185. Toronto, Canada, 129-192, 2004.
186. Hartley, J.G. ve Patterson, J.A.L., “The Influence
187. of Temperature, Moisture Content and Binder
188. Content on the Conductivity of Dried Bentonite-
189. Bonded Zirkon and Silica Sands”, AFS
190. Transactions, 91, 183-190, 1983.
191. Kannaiah, P., Narayana, K.L. ve Roshan, H. Md.,
192. “Thermal Properties of Molding Sands, Casting-
193. Over Probe Embedded Specimen Method”, AFS
194. Transactions, 95, 591-600, 1987.
195. Hartley, J.G., Babcock, D. ve Berry, J.T., “The
196. Thermal Conductivity of Bentonite-Bonded
197. Molding Sands”, AFS Transactions, 89, 469-
198. , 1981.
199. Bandyopadhyay, B.P., Joshi, M.D. ve
200. Chakraborty, P.N., “A Transient Method of
201. Simultaneous Measurement of Thermal
202. Properties of Moulding Sand Using Plane Heat
203. Source”, British Foundryman, 77, 318-321,
204. -
205. Seshadri, M.R. ve Ramachandran, A., “Mold
206. Materials Thermal Properties”, AFS
207. Transactions, 69, 616-624, 1961.
208. Krishnan, M. ve Sharma, D.G.R., “Determination
209. of the Interfacial Heat Transfer Coefficient h in
210. Unidirectional Heat Flow by Beck’s Non Linear
211. Estimation Procedure”, Int. Comm. Heat Mass
212. Transfer, 23, 203-214, 1996.
213. Özışık, M.N., Finite Difference Methods in
214. Heat Transfer, Mechanical and Aerospace
215. Engineering Department, North Carolina State
216. University, ABD, 1994.
217. Incropera, F.P. ve Dewitt, D.P., Fundamentals of
218. Heat and Mass Transfer, John Wiley & Sons,
219. Purdue University, School of Mechanical
220. Engineering, ABD, 1996.
221. Kayıkcı, R. ve Griffiths, W.D., “The Influence of
222. Surface Roughness on Interfacial Heat Transfer
223. during Casting Solidification”, Foundryman, 92,
224. -273, 1999.
225. Kayıkcı, R., Metal-Mold Contact and Heat
226. Transfer during Casting Solidification, PhD
227. Thesis, Manchester Materials Science Centre,
228. University of Manchester and UMIST,
229. Manchester, 77-181, 1999.
230. Wang, G.-X. ve Matthys, E.F., “Experimental
231. Determination of the Interfacial Heat Transfer
232. during Cooling and Solidification of Molten
233. Metal Droplets Impacting on A Metallic
234. Substrate: Effect of Roughness and Superheat”,
235. International Journal of Heat and Mass
236. Transfer, 45, 4967–4981, 2002.
237. Gafur, M. A., Nasrul Haque, M. ve Narayan
238. Prabhu, K., “Effect of Chill Thickness and
239. Superheat on Casting/Chill Interfacial Heat
240. Transfer during Solidification of Commercially
241. Pure Aluminum”, Journal of Materials
242. Processing Technology, 133, 257-265, 2003.
243. Akar, N, Katılaşma Sırasında Döküm-Kalıp
244. Ara Yüzeyinde Isı Transfer Katsayısının
245. İncelenmesi, Doktora Tezi, Gazi Üniversitesi,
246. Fen Bilimleri Enstitüsü, 2006.