GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI

Neslihan Özgün Demirel; Hadi Gökçen

GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI

Öz

Son zamanlarda firmalar; ekonomik ve ekolojik sebepler, hükümetlerin koydukları kanunlar, sosyalsorumluluklar gibi nedenlerden dolayı tersine akışı sistemlerine dâhil etmektedirler. Bu firmalar, etkin bir tersine lojistik ağının tasarlanması ve malzeme, parça ve ürünlerin tersine akışının etkin bir şekilde yönetilmesi gibi problemlerle karşı karşıya kalmaktadır. Genel bir tersine lojistik ağı tüketicilerden kullanılmış ürünlerin toplanması, depolanması, yeniden işlenmesi ve geri dağıtılması faaliyetlerini içerir. Bu çalışmada tersine lojistik ağı tasarımı ve modellenmesi konusunda yapılmış olan çalışmalar incelenmiş, sınıflandırılmış ve temel özellikleri analiz edilmeye çalışılmıştır.

Anahtar Kelimeler

Tersine lojistik, ağ tasarımı, tesis yer seçimi ve atama problemleri, literatür araştırması.

Kaynakça

Dowlatshahi, S., “A strategic framework for the
design and implementation of remanufacturing
operations in reverse logistics”, International
Journal of Production Research, Cilt 43, No
, 3455–3480, 2005.
Fleischmann M., Beullens, P., Bloemhof-
Ruwaard, J.M., van Wassenhove, L.N., “The
Impact of Product Recovery on Logistics

Network Design”, Production and Operations
Management, Cilt 10, No 2, 156, 2001.
Fleischmann, M., Bloemhof-Ruwaard, J.M.,
Dekker, R., van der Laan, E., van Nunen,
J.A.E.E. And van Wassenhove, L.N.,
“Quantitative models for reverse logistics: a
review (Invited Review)”, European Journal of
Operational Research, Cilt 103, No 1, 1-17,
-
Hillegersberg, J., Zuidwijk, R., Nunen, J., Eijk,
D., “Supporting Return Flows in the Supply
Chain”, Communications of the ACM, Cilt 44,
No 6, 74-79, 2001.
Gungor, A. ve Gupta, S.M., “Issues in
environmentally conscious manufacturing and
product recovery: A survey”, Computers and
Industrial Engineering, Cilt 36, No 4, 811-853,
-
Lourenço, H.R., Soto, J.P., Institul D’estudis
Territorials, Publications-Document de treball,
www.ietcat.org, “Reverse logistics models and
applications: A recoverable production planning
model”, 2002.
Tibben-Lemke, R.S. ve Rogers, D.S.
“Differences Between Forward and Reverse
Logistics in a Retail Environment”, Supply Chain
Management: An International Journal, Cilt 7, No
, 271-282, 2002.
Lu, Z., Bostel, N., Dejax, P., “Simple Plant
Location Problem with Reverse Flow”, Supply
Chain Optimisation Product/Process Design,
Facility Location and Flow Control, Cilt 94,
Panos M. Pardalos, Donald W. Hearn (Editors),
-166, 2005.
Kroon, L. ve Vrijens, G., “Returnable Containers:
An Example of Reverse Logistics”,
International Journal of Physical Distribution
and Logistics Management, Cilt 25, No 2, 56-
, 1995.
Krikke, H.R., van Harten, A., Schuur, P.C.,
“Business Case Oce: Reverse Logistic Network
Redesign for Copiers”, OR Spectrum, Cilt 21,
No 3, 381-409, 1999.
Barros A.I., Dekker R., Scholten V.A., “A Twolevel
Network for Recycling Sand: A Case
Study”, European Journal of Operational
Research,Cilt 110, 199–214, 1998.
Jayaraman V., Guide Jr. V.D.R., Srivastava R.,
“A Closedloop Logistics Model for
Remanufacturing”, Journal of the Operational
Research Society, Cilt 50, 497–508, 1999.
Ko, H.J. ve Evans, G.W., “A Generic Algorithmbased
Heuristic for the Dynamic Integrated
Forward/Reverse Logistics Network for 3PL’s”,
Computers and Operations Research, Cilt 34,
-366, 2007.
Kusumastuti, R.D., Piplani, R., Lim, G.H., “An
Approach to Design Revese Logistics Networks
for Product Recovery”, Engineering
Management Conference, 2004 IEEE
ınternational, Cilt 3, 1239- 1243, 2004.
Lieckens, K. ve Vandaele, N., “Reverse Logistics
Network Design with Stochastic Lead Times”,
Computers and Operations Research, Cilt 34,
-416, 2007.
Thierry M.C., An Analysis of the Impact of
Product Recovery Management on
Manufacturing Companies, Doktora Tezi,
Erasmus University, Rotterdam, 1997.
Louwers, D., Kip, B.J., Peters, E., Souren, F.,
Flapper, S.D.P., “A Facility Location Allocation
Model for Reusing Carpet Material”, Computers
and Industrial Engineering, Cilt 36, No 4, 855–
, 1999.
Du, F. ve Evans G.W., “A Bi-objective Reverse
Logistics Network Analysis for Post-sale
Service”, Computers and Operations
Research, Cilt 35, 2617-2634, 2008.
Pati, R.K., Vrat, P., Kumar, P., “A Goal
Programming Model for Paper Recycling
System”, Omega, Cilt 36, 405- 417, 2008.
Demirel Özgün N. ve Gökçen H., “A Mixed
Integer Programming Model for
Remanufacturing in Reverse Logistics
Environment”, International Journal of
Advanced Manufacturing Technology,
baskıda, 2008.
Beamon, B.M. ve Fernandes, C., “Supply-Chain
Network Configuration For Product Recovery”,
Production Planning and Control, Cilt 15, No
, 270-281, 2004.
Jayaraman, V., Patterson, R.A., Rolland, E., “The
Design of Reverse Distribution Networks:
Models and Solution Procedures”, European
Journal of Operational Research, Cilt 150, No
, 128-149, 2003.
Lu, Z., Bostel, N., “A Facility Location Model
for Logistics Systems Including Reverse Flows:
The Case of Remanufacturing Activities”,
Computers and Operations Research, Cilt 34,
-323, 2007.
Spengler T., Püchert H., Penkuhn T., Rentz O.,
“Environmental Integrated Production and
Recycling Management”, European Journal of
Operational Research, Cilt 97, 308-326, 1997.
Salema M.I.G., Barbosa-Povoa, A.P., Novais,
A.Q., “An Optimization Model for the Design of
a Capacitated Multi-product Reverse Logistics
Network with Uncertainty”, European Journal
of Operational Research, Cilt 179, 1063-1077,
-
Lee, D.H. ve Dong, M., “A Heuristic Approach
to Logistics Network Design for End-of-lease
Computer Products Recovery”, Transportation
Research Part E, baskıda, 2007.
Assavapoke, T., Wayuparb, P., Yao, H., “Reverse
Logistics Network Design for Electronic Products
in the State of Texas”, Technical Report at the
University of. Houston, September 2006.
Chouinard, M., D’Amours, S., Ait-Kadi, D.,
“Design of Reverse Logistics Networks for
Multiproducts, Multistates, and Multiprocessing
Alternatives”, Trends in Supply Chain Design
and Management, Springer, London, 2007.
Listeş, o. ve Dekker, R., “A Stochastic Approach
to a Case Study for Product Recovery Network
Design”, European Journal of Operational
Research, Cilt160, 268-287, 2005.
Listeş, O., “A Generic Stochastic Model for
Supply-and-Return Network Design”,
Computers and Operations Research, Cilt 34,
-442, 2007.
Berger T. ve Debaillie B., Location of
disassembly centres for re-use to extend an
existing distribution network, Master Tezi,
University of Leuven, Belgium (in Dutch), 1997.
Fleischmann M., Quantitative Models for
Reverse Logistics. Springer, Berlin, Germany,
-
Lu Z., Bostel, N., ve Dejax, P., “The Simple Plant
Location Problem with Reverse Flows”. In: A.
Dolgui, J. Soldek, O. Zaikin (eds.), Suply Chain
Optimization. Kluwer Academic Publishers, In
press, 2004.
Salema M.I., Povoa, A.P.B., Novais, A.Q., “A
Warehouse-based Design Model for Reverse
Logistics”, Journal of the Operational
Research Society, Cilt 57, 615-629, 2006.
Min H. ve Ko H.J., “The Dynamic Design of a
Reverse Logistics Network from the Perspective
of Third-party Logistics Service Providers”,
International Journal of Production
Economics, baskıda, 2007.
Fandel, G., Stammen, M., “A General Model for
Extended Strategic Supply Chain Management
with Emphasis on Product Life Cycles Including
Development and Recycling”, International
Journal of Production Economics, Cilt 89, No
, 293-308, 2003.
Wang, C.H., Even, J.C., Adams, S.K., “A Mixed
Integer Linear Model for Optimal Processing and
Transport of Secondary Materials”, Resources,
Conservation and Recycling, Cilt 15, 65-78,
-
Pochampally, K.K. ve Gupta, S.M., “A Multiphase
Mathematical Programming Approach to
Strategic Planning of an Efficient Reverse Supply
Chain Network”, Proceedings of the IEEE
International Symposium on the Electronics
and the Environment, 72-78, 2003.
Schultmann, F., Engels, B., Rentz, O., “Closedloop
Supply Chains for Spent Batteries”,
Interfaces, Cilt 33, No 6, 57-71, 2003.
Min H., Ko, H.J., Ko, C.S., “A Genetic
Algorithm Approach to Developing the Multiechelon
Reverse Logistics Network for Product
Returns”, Omega, Cilt 34, 56-69, 2006.
Tang Q., Xie, F., “A Genetic Algorithm for
Reverse Logistics Network Design”, Third
International Conference on Natural
Computation, Cilt 4, 277-281, 2007.
Ammons J.C., Realff, M.J., Newton, D.,
“Reverse Production System Design and
Operation for Carpet Recycling”, Work paper,
Georgia Institute of Technology, 1997.
Shih, L.S., “Reverse Logistics System Planning
for Recycling Electrical Appliances and
Computers in Taiwan”, Resources,
Conservation and Recycling, Cilt 32, 55-72,
-
Xanthopoulos, A. ve Iakovou, E., “A
Methodological Framework for the Efficient
Configuration of a Reverse Logistics Network”,
in Protection2006, 2006.
Aras, N. ve Asken, D., “Locating Collection
Centers for Distance-and Incentive-dependent
Returns”, International Journal of Production
Economics, Cilt 111, 316-333, 2008.
Srivastava, S.K., “Network Design for Reverse
Logistics”, Omega, Cilt 36, 535-548, 2008.

Ayrıntılar

Birincil Dil

Türkçe

Konular

-

Bölüm

-

Yazarlar

Neslihan Özgün Demirel Bu kişi benim

Hadi Gökçen Bu kişi benim

Yayımlanma Tarihi

18 Şubat 2013

Gönderilme Tarihi

18 Şubat 2013

Kabul Tarihi

-

Yayımlandığı Sayı

Yıl 2008 Cilt: 23 Sayı: 4

IZ

https://izlik.org/JA25XT34XL

Kaynak Göster

RIS / Bibtex

APA

Özgün Demirel, N., & Gökçen, H. (2013). GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 23(4). https://izlik.org/JA25XT34XL

AMA

1.Özgün Demirel N, Gökçen H. GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI. GUMMFD. 2013;23(4). https://izlik.org/JA25XT34XL

Chicago

Özgün Demirel, Neslihan, ve Hadi Gökçen. 2013. “GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI”. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 23 (4). https://izlik.org/JA25XT34XL.

EndNote

Özgün Demirel N, Gökçen H (01 Mart 2013) GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 23 4

IEEE

[1]N. Özgün Demirel ve H. Gökçen, “GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI”, GUMMFD, c. 23, sy 4, Mar. 2013, [çevrimiçi]. Erişim adresi: https://izlik.org/JA25XT34XL

ISNAD

Özgün Demirel, Neslihan - Gökçen, Hadi. “GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI”. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 23/4 (01 Mart 2013). https://izlik.org/JA25XT34XL.

JAMA

1.Özgün Demirel N, Gökçen H. GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI. GUMMFD. 2013;23. Available at https://izlik.org/JA25XT34XL.

MLA

Özgün Demirel, Neslihan, ve Hadi Gökçen. “GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI”. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, c. 23, sy 4, Mart 2013, https://izlik.org/JA25XT34XL.

Vancouver

1.Neslihan Özgün Demirel, Hadi Gökçen. GERİ KAZANIMLI İMALAT SİSTEMLERİ İÇİN LOJİSTİK AĞI TASARIMI: LİTERATÜR ARAŞTIRMASI. GUMMFD [Internet]. 01 Mart 2013;23(4). Erişim adresi: https://izlik.org/JA25XT34XL