BAKIR ORANININ DEMİR-ESASLI YAPISAL TOZ METAL MALZEMELERİN MEKANİK ÖZELLİKLERİ VE DELİNEBİLİRLİĞİNE ETKİSİNİN ARAŞTIRILMASI

Öz

Bu çalışmada standart bir demir-esaslı Toz Metal (TM) bakır çeliğinin (FC-0208) diğer TM proses parametrelerisabit tutularak, içerisindeki bakır oranı % 1-4 arasında 4 farklı kademede artırılarak üretimi yapılmış ve bunumuneler üzerinde delik delme talaşlı imalat testleri gerçekleştirilmiştir. Yapılan testlerde her bir malzemegrubunun işlenmesi esnasında oluşan itme-ilerleme kuvveti, takım aşınması ve deliklerin yüzey pürüzlülüğüölçülmüş, ayrıca talaş morfolojisini incelemek için optik fotoğrafları çekilmiştir. Çalışmanın amacı; artan bakıroranının, TM tekniğiyle üretilen bu malzemelerin talaşlı işleme sonucu oluşan takım aşınması ve onunla ilişkilitalaş oluşumuna etkisini deneysel olarak araştırmaktır. Sonuçlar, artan bakır oranının takım aşınmasını azalttığı,talaş oluşumunu iyileştirdiğini göstermiştir. Elde edilen kesme kuvveti ve yüzey pürüzlülüğü verileri de bunudestekler niteliktedir.

Anahtar Kelimeler

• Toz Metalurjisi, delme, bakır oranı, takım aşınması, yüzey pürüzlülüğü, talaş morfolojisi, itme kuvveti

Kaynakça

1. Höganäs AB,. “Material and Powder Properties
2. Volume 1”, Höganäs Handbook for Sintered
3. Components, Sweden. 2004a.
4. Benner, A., Beis, P., “Wear Aspects During Gren
5. Machining of Warm Compacted PM Steels”,
6. Mat.-wiss. U. Werkstofftech, 35, no.10/11, 663-
7. , 2004.
8. Šalak, A., Selecká, M., Danninger, H.,

9. “Machinability of Powder Metallurgy Steels”, Cambridge International Science Publishing,
10. , Cambridge UK, 2005.
11. Yılmaz, N., Demir-Esaslı TM malzemelerin
12. Talaşlı İşlenebilirliği, Doktora Tezi, S.D.U. Fen
13. Bil. Enstitüsü, Isparta, 2006.
14. Agapiou, J.S., DeVries, M.F., Machinability of
15. Powder Metallurgy Materials, The International
16. Journal of Powder Metallurgy, vol. 24, no 1,
17. -57, American Powder Metallurgy Institute,
18. -
19. Armarego, E.J.A., Shi, G., Verezub, S.,
20. Modelling the Basic Cutting Action and
21. Machining Performance of Sintered Metallic
22. Materials, Machining Science and Technology, 5
23. (3), 353-373, Marcel Dekker Inc., 2001.
24. Smith, G.T., Surface Integrity aspect of
25. Machinability Testing of Fe-C-Cu Powder
26. Metallurgy Components, Powder Metallurgy,
27. Vol. 33, No. 2, 157-164, 1990a.
28. Smith, G.T., The Machining of P/M Components
29. in a Flexible manufacturing Environment.
30. Proceedings of World Conference on Powder
31. Metallurgy, Vol.1, Wembley Conference
32. Centre, London, 2-6 July, 1990b.
33. Mazilu, D., Craciunoiu, N., Cialacu, F.G., “On
34. the Cutting Forces and Tool Wear for some
35. Powder Metallurgy Materials”, Proceedings of
36. the SECTAM-XX., April 16-18, Callaway
37. Gardens, Pine Mountain, GA, 2000.
38. Romero, A., Vivancos, J., Sierra, C., Prado, J.M.,
39. “Rapid Characterisation of Machinability on PM
40. Steel Parts”, PM World Congress Proceedings,
41. Post Sintering, EPMA, October 18-22, Granada-
42. Spain, 1998.
43. Roy, L.G., de Rege, A.F., Pease, L.F., 1988, “
44. Relationship Between Machinability and Strength
45. in a Prealloyed Manganese Sulfide Sintered
46. Material”, Proceedings of Int. PM Conference,
47. Vol. 21, Ch. 7, Steps to Improve Machinability,
48. APMI.
49. Beis, P., Jager, H-J., Kutsch, U., “Heat Balance
50. During Drilling of a Sintered Stainless Steel”,
51. PM World Congress Proc., Post Sintering,
52. EPMA, October 18-22, Granada-Spain, 1998.
53. Causton, R.J., Schade, C., Machinability:A
54. Material Property or Process Response, P/M2
55. TEC 2003 World Congress, Las Vegas, 2003.
56. Kutsch, U., Beis, P., Jager, J-J., “Effect of
57. Density on Mechanical Properties, Thermal
58. Conductivity and Machinability of Sintered
59. Stainless Steels”, European Conference on
60. Advances in Structural PM Component
61. Production-Finishing, Munich-Germany,
62. October 15-17, EPMA, 1997.
63. Fulmer, J.J., Blanton, M.J., “The Effect of
64. Microstructure on the Machinability of an MPIF
65. FC-0208 Copper Steel” , PM
66. Conference&Exhibition, 4, APMI, 1992.
67. Nigarura, S., L’esperance, G., Roy, L,G., de
68. Rege, A., Pease, L, F., “The Influence of Powder
69. Processing on The Nature of Inclusions and Its
70. Relation to The Machinability of MnS Prealloyed
71. P/M Parts”, Proceedings of The PM Conference
72. & Exhibition, v.4, Secondary Operations,
73. Quality and Standarts, APMI, 1992.
74. Gülsoy, H. Ö., Uçar, M., Özcan, E., “Fe-Cu-C
75. Kompaktlarına Katılan İlave C Miktarının
76. İşlenebilirlik Özelliklerine Etkisi”, Uluslarası
77. katılımlı 2.Ulusal Toz Met. Konf. Bildiriler
78. Kitabı, s. 475-481, 15-17 Eylül 1999, ODTÜ,
79. ANKARA, 1999.
80. Hultman, L., Thoors, H., Sten, B., Influence of
81. machining Parameters on the Machinability of
82. Sintered Steels, P/M2 TEC’96 World Congress,
83. Washington, 1996
84. Gagné, M., Danaher, A., Influence of Drilling
85. Parameters on the Machinability of P/M
86. Materials, P/M2 TEC 1998 World Congress,
87. Las Vegas, 1998.
88. Engström, U., “Machinability of Sintered Steels”,
89. Pov. Met., 26 (3), 137-143, 1983.
90. Chopra, K.S., “Manganese Sulfide in Machining
91. Grade Ferrous P/M Alloys”, Proceedings of Int.
92. PM Conference, Vol. 21, Ch. 7, Steps to
93. Improve Machinability, APMI, 1988.
94. Poirer, J.P., Gagne, M., “A New Approach to
95. Improve Machinability of High Strength PM
96. Parts”, Metal Powder Report, Vol. 45, No.3,
97. -186, 1990.
98. Ambs, H.D., “Machinability Studies on Sintered
99. Stainless Steels”, Proceedings of the 1991
100. Conference &Exhibition Vol.3, Advances in
101. PM, APMI, 1991.
102. Madan, D.S., “Effect of Manganese Sulfide
103. (MnS) on Properties of High Performance P/M
104. Alloys and Applications”, Proceedings of The
105. PM Conference & Exhibition, v.4, Secondary
106. Operations, Quality and Standarts, APMI, 1992.
107. Chen, Y.T., Baudisch, R., Ceci, L. and Kiefer,
108. R., “Free-Machining P/M Alloy Optimization
109. using Statistical Analytical Techniques-The
110. Effect of MnS Content and Particle Size”,
111. Proceedings of The PM Conference &
112. Exhibition, v.4, Secondary Operations, Quality
113. and Standarts, APMI, 1992.
114. Madan, D.S., “Effect of Manganese Sulfide
115. (MnS) on Properties of High Performance P/M
116. Alloys and Applications”, Proceedings of The
117. PM Conference & Exhibition, v.4, Secondary
118. Operations, Quality and Standarts, APMI, 1992.
119. Causton, R:J., Machinability of P/M Steels,
120. Proceedings of Int. Conf. On P/M and
121. Particulate Materials, Seattle, Washington, US,
122. -
123. Romero, A., Vivancos, J., Sierra, C., Prado, J.M.,
124. “Rapid Characterisation of Machinability on PM
125. Steel Parts”, PM World Congress Proceedings,
126. Post Sintering, EPMA, October 18-22, Granada-
127. Spain, 1998
128. Blais, C., L’Espérance, G., Bourgeois.,
129. Characterisation of Machinability of Sintered
130. Steels During Drilling Operations, Pow. Metal.,
131. Vol.44, No1, 67-75, 2001 .
132. Causton, R.J., Role of Additives in PM
133. Machining, P/M2 TEC 2002 World Congress
134. on PM and Particulate Materials, June 16-21,
135. Orlando, Florida, 2002.
136. Srivastava, A.K., “An Experimental Investigation
137. on the Machinability of Powder Metal Steels”,
138. Int. J. Precision Technology, Vol. 1, No. 1, 11-
139. , 2007.
140. Johansson, R., “ Different Methods To Improve
141. of High Strength Sintered Steels”, Proceedings
142. of Int. PM Conference, Vol. 21, Ch. 7, Steps to
143. Improve Machinability, APMI, 1988.
144. Chagon, F., Gagne, M., “Machining Sinter
145. Hardenable PM Materials”, PM World
146. Congress Proceedings, Post Sintering, EPMA,
147. October 18-22, Granada-Spain, 1998.
148. Cimino, T.M., Luk, S.H., Machinability
149. Evaluation of Selected High Gren Strength P/M
150. Materials, P/M2 TEC World Congress on PM
151. and Particulate Materials, May 14-17, Seattle,
152. Washington USA, 1995.
153. Causton, R:J., Machinability of P/M Steels,
154. Proceedings of Int. Conf. On P/M and
155. Particulate Materials, Seattle, Washington,
156. USA, 1995.
157. Gagne, M., Chagnon, F., Enhancing the
158. Machinability of Powder Forged Components.
159. PM World Congress Proceedings, Post
160. Sintering, EPMA, October 18-22, Granada-
161. Spain, 1998.
162. Chagnon, F., Tremblay, L., St-Laurent, S.,
163. Gagné, M., Improving Gren Strength to Enable
164. Gren Machining, SAE, Technical Paper, 01-
165. , 1999.
166. Benner, A., Beis, P., Wear Aspects During Gren
167. Machining of Warm Compacted PM Steels,
168. Mat.-wiss. U. Werkstofftech, 35, no.10/11, 663-
169. , 2004.
170. Vaccari, J., “Improving Machinability of PM
171. Parts”, Machine Shop Guide Web Archive,
172. March, 2000.
173. Berg, S., Machinability of Sintered Steels:
174. Guidelines for Turning, Drilling and Tapping.
175. International Conferences on Advances in
176. Powder Metallurgy &Particulate Metarials,
177. Proceedings, Vol. 2, MPIF/APMI, Chicago,
178. USA, 1997.
179. Berg, S., Thorndenberg, H., “Cutting Data
180. Recommendations for Turning ofVarious PM
181. Materials using Different Tool Grade and
182. Geometry Selections”, PM World Congress
183. Proceedings, Post Sintering, EPMA, October
184. -22, Granada-Spain, 1998.
185. Höganäs AB, Machining Guidelines Volume 5.
186. Höganäs Handbook for Sintered Components,
187. Sweden, 2004b.
188. MPIF Standart 35, Materials Standarts for P/M
189. Structural Parts. Metal Powder Industries
190. Federation, Princeton, NJ., USA, 2000.
191. ASM Metals Handbook, Powder Metal
192. Technologies and Applications Volume 7. ASM
193. International, 1146. USA, 1998.
194. Mazilu, D., Craciunoiu, N., Cialacu, F.G., “On
195. the Cutting Forces and Tool Wear for some
196. Powder Metallurgy Materials”, Proceedings of
197. the SECTAM-XX., April 16-18, Callaway
198. Gardens, Pine Mountain, GA, 2000.
199. Chawla, N., Deng, X., Microstructure and
200. Mechanical Behavior of Sintered Steels.
201. Materials Science & Engineering A, 390, 98-
202. , 2005.
203. German, R.M., Powder Metalurgy Science,
204. MPIF, 278. USA, 1984.
205. Brânduşan, L., Researches Regarding the
206. Influence of Cu Content on Static and Dynamic
207. Properties of Sintered Steels. Leonardo
208. Electronic Journal of Practices and
209. Technologies, ISSN 1583-1078, Issue 4,
210. January-June, 30-37, 2004.
211. Oxley, P.L.B., The Mechanics of Machining:
212. An Analytical Approach to Assessing
213. Machinability, Ellis Horwood Limited, England,
214. -