Isı Üreten İçi Dolu Kompozit Bir Silindirde Malzeme Özelliklerinin Elastik-Plastik Deformasyona Etkisi

Öz

Tresca akma kriteri ve birleşik akış kuralına dayanarak, iki ucu sabit, ortasından ısıtılan kompozit bir silindirin elastik-plastik deformasyonu, sadece geometrik parametrelerin etkisi değil aynı zamanda akma dayanımı, elastisite modülü, Poisson oranı, ısıl iletkenlik ve ısıl genleşme katsayıları gibi malzeme özelliklerinin de etkisi dikkate alınarak incelenmiştir. Çalışmada, elastik-mükemmel plastik malzemeden yapılmış bu kompozit silindirdeki gerilme, gerinim ve deplasman dağılımları elde edilmiştir. İçteki silindirde artan ısı üretimine göre değişen gerilme dağılımı ve plastik bölgelerin gelişimi grafiklerle gösterilmiştir.

Anahtar Kelimeler

• Isıl gerilme, elastik-plastik gerilme analizi, kompozit silindir, Tresca akma kriteri.

Kaynakça

1. Hallam, C. B. ve Ollerton, E., “Thermal stresses in
2. axially connected circular cylinders”, Journal of
3. Strain Analysis, 8, 160-167, 1973.
4. Stanley, P. ve Chan, W. K., “The application of
5. thermoelastic stress analysis techniques to
6. composite materials”, Journal of Strain
7. Analysis, 23, 137-143, 1988.
8. Lee, Z.-Y., Chen, C.K. ve Hung, C.-I., “Transient

9. thermal stress analysis of multilayered hollow
10. cylinder”, Acta Mechanica, 151, 75-88, 2001.
11. Orçan, Y. ve Gamer, U., “Elastic-plastic
12. deformation of a centrally heated cylinder”, Acta
13. Mechanica, 90, 61-80, 1991.
14. Orçan, Y., “Thermal-stresses in a heat generating
15. elastic-plastic cylinder with free ends”,
16. International Journal of Engineering Science,
17. , 883-898, 1994.
18. Gülgeç, M., “Influence of the temperature
19. dependence of the yield stress on the stress
20. distribution in a heat generating elastic-plastic
21. cylinder”, Zeitschrift fur Angewandte
22. Mathematik und Mechanic, 1999, 79, 210-216.
23. Gülgeç, M. ve Orçan, Y., “Elastic-plastic
24. deformation of a heat generating tube with
25. temperature-dependent yield stress”,
26. International Journal of Engineering Science,
27. , 89-106, 2000.
28. Orçan, Y. ve Gülgeç, M., “Influence of the
29. temperature dependence of the yield stress on the
30. stress distribution in a heat-generating tube with
31. free ends”, Journal of Thermal Stresses, 23,
32. -547, 2000.
33. Lee, S., Wang, W.L. ve Chen, J.R., “Diffusioninduced
34. stresses in a hollow cylinder”,
35. Materials Science and Engineering A, 285,
36. –194, 2000.
37. Orçan, Y. ve Eraslan, A. N., “Thermal stresses
38. in elastic-plastic tubes with temperaturedependent
39. mechanical and thermal properties”,
40. Journal of Thermal Stresses, 24, 1097-1113,
41. -
42. Gülgeç, M.,“Thermal Stress Analysis of a Free-
43. End Cylinder Having a Temperature Dependent
44. Yield Stress Subjected to Transient Radial
45. Temperature Distribution”, Journal of the
46. Faculty of Engineering and Architecture of
47. Gazi University, Vol 17, No 2, 25-34, 2002.
48. Gülgeç, M.,“Elastic-Plastic Analysis of a
49. Cylinder Having Temperature Dependent Yield
50. Stress with Rigid Casing”, Journal of the
51. Faculty of Engineering and Architecture of
52. Gazi University, Vol 18, No 3, 85-96, 2003.
53. Eraslan, A.N., “Thermally Induced
54. Deformations of Composite Tubes Subjected to
55. a Nonuniform Heat Source”, Journal of
56. Thermal Stresses, 26, 167-193, 2003.
57. Eraslan, A.N., Şener, E. ve Argeso, H., “Stress
58. Distribution in Energy Generating Two-layer
59. Tubes Subjected to Free and Radially
60. Constrained Boundary Conditions”,
61. International Journal of Mechanical Sciences,
62. , 469–496, 2003.
63. Chao, C.K., Chuang, C.T. ve Chang, R.C.,
64. “Thermal stresses in a viscoelastic three-phase
65. composite cylinder”, Theoretical and Applied
66. Fracture Mechanics, 48, 258–268, 2007.
67. Irfan, M. A. ve Chapman, W., “Thermal stresses
68. in radiant tubes due to axial, circumferential and
69. radial temperature distributions”, Applied
70. Thermal Engineering, 29, 1913–1920, 2009.
71. Bîrsan, M., “Thermal stresses in cylindrical
72. Cosserat elastic shells”, European Journal of
73. Mechanics A/Solids, 28, 94–101, 2009.
74. Shao, Z.S., Fan, L.F. ve Ma, G.W., “Theoretical
75. investigation on thermo-mechanical stresses in
76. laminated cylindrical panels”, Journal of
77. Thermoplastic Composite Materials, 23, 111-
78. , 2010.
79. Tsukrov, I. ve Drach, B., “Elastic deformation
80. of composite cylinders with cylindrically
81. orthotropic layers”, International Journal of
82. Solids and Structures, 47, 25–33, 2010.
83. Incropera, F.P. ve De Witt, D.P., Fundamentals
84. of Heat and Mass Transfer, 2. Baskı, John
85. Wiley & Sons, New York, A.B.D., 1985.
86. Öztürk, A., Ortasından Isıtılan İki Ucu Sabit
87. Kompozit Silindirde Elastik-Plastik Gerilme
88. Analizi, Yüksek Lisans Tezi, Gazi Üniversitesi,
89. Fen Bilimleri Enstitüsü, 2001.