FİBER KOMPOZİT ÇOK KATLI TÜPSEL SİLİNDİRLERİN BURULMA EKSENEL BASKI YÜKÜ VE DIŞ BASINÇ YÜKLEMELERİ ALTINDA BURKULMA DENKLEMLERİNİN ÇIKARILIŞLARI

Öz

Bu çalışmada, çok katlı fiber kompozit silindirlerin denge denklemleri aynı anda etkiyen burulma, eksenel yük ve dış basınç yüklemeleri altında burkulma analizi için incelenmiştir. Denge denklemleri, Klasik ve Birinci Mertebeden Kayma Deformasyon Teorilerine göre olmak üzere her ikisi içinde, iki grup çıkarımlarda matris formunda elde edilmişlerdir. Bu denklemlerin her birinde, başlangıç gerilme yüklemelerinin etkisi dikkate alınmıştır. Bütün bu ifadeler, üç değişik yüklemenin aynı anda etkidiği fiber kompozit silindirin denge
denklemleridir. Daha önce tanımlanmış olan iki ana teoriye göre çözümleme yapabilmek için, yerdeğiştirmeler cinsinden elde edilen denge denklemleri ilgili yaklaşık seri açılımları ile birlikte kullanılarak tanımlanmışlardır. Elde edilen ifadeler, özdeğer probleminin sıkıştırılmış matris formunu veren şekliyle görülmüşlerdir.

Anahtar Kelimeler

• Burkulma, ortotropik, fiber kompozit, denge denklemleri, özdeğer-problemi, silindir

DERIVATIONS OF BUCKLING EQUATIONS FOR THE MULTILAYERED FIBER COMPOSITE TUBULAR CYLINDERS UNDER TORSION AXIAL COMPRESSIVE LOAD AND EXTERNAL PRESSURE

Öz

In this study, equilibrium equations of multi-layered fiber composite cylinders under combined torsion, axial force and external pressure were examined for buckling analysis. Equations of equilibrium were obtained for both Classical and First Order Shear Deformation Theories in the two groups of derivations as matrix equation. In each of these equations, initial stress loading was included. All of these expressions are the equilibrium equations of fiber composite cylinder in which the three different type of loadings are acting simultaneously. In order to obtain the solutions corresponding to the previously described two main theories, displacement based equilibrium equations have been used by defining them with the related approximated series expansions. Equations appeared to be seen in the compressed matrix form of an eigenvalue problem.  

Kaynakça

1. Etitum, P. ve Dong, S.B., “A Comparative Study
2. of Stability of Laminated Anisotropic Cylinders
3. under Axial Compression and Torsion”, Int. J.
4. Solids Structures, Cilt 32, No (8/9), 1231-1246,
5. -
6. Dong, S.B. ve Etitum, P., “Three Dimensional
7. Stability Analysis of Laminated Anisotropic
8. Circular Cylinders”, Int. J. Solids Structures,

9. Cilt 32, No (8/9), 1211-1230, 1995.
10. Dong, S.B. ve Chun, C.K., “Shear Constitutive
11. Relations for Laminated Anisotropic Shells and
12. Plates. Part I-Methodology”, J. Appl. Mech. Cilt
13. , No 2, 372-379,1992.
14. Dong, S.B. ve Etitum, P., “Three Dimensional
15. Stability Analysis of Laminated Anisotropic
16. Cylinders”, Int. J. Solids Structurals, Cilt 31,
17. , 1994.
18. Dong, S.B., Pister, K.S. ve Taylor, R.L., “On the
19. Theory of Laminated Anisotropic Shells and
20. Plates”, J. Aeorospace Sci., Cilt 29, No 89, 969-
21. , 1962.
22. Etitum,P., “Stability Analysis of Laminated
23. Composite Cylinders”, Ph.D. Dissertation,
24. Department of Civil and Environmental
25. Engineering, University of California, Los
26. Angeles, CA., 1993.
27. Dong, S.B. ve Wolf, J.A., “Stability Analysis of
28. Structures by a Reduced System of Generalized
29. Coordinates”, Int. J. Solids Structures, Cilt 6,
30. -1388, 1970.
31. Dong, S.B.,Wolf, J.A ve Peterson, F.E., “On a
32. Direct Iterative Eigensolution Technique”, Int. J.
33. Numer. Meth. Engng, Cilt 4, 155-162, 1972.
34. Tennyson, R.C., “Buckling of Laminated Composite
35. Cylinders: A Review”, Composites, 17-24, 1975.
36. Lou, K.A. ve Yaniv, G., “Buckling of Circular
37. Cylindrical Composite Shells under Axial
38. Compression and Bending Loads”, Journal of
39. Composite Materials, Cilt 25, 162-187, 1991.
40. Rezaeepazhand, J. ve Simitses, G.J., “Structural
41. Similitude for Vibration Response of Laminated
42. Cylindrical Shells with Double Curvature”,
43. Composites: Part B, 28, 195-200, 1997.
44. Lee, C.S., Hwang, W., Park, H.C. ve Han, K.S.,
45. “Failure of Carbon/Epoxy Composite Tubes under
46. Combined Axial and Torsional Loading- 1. Experimental
47. Results and Prediction of Biaxial Strength by
48. the Use of Neutral Networks”, Composite Science
49. and Technology, Cilt 59, 1779-1788, 1999.
50. Lee, C.S., Hwang, W., Park, H.C. ve Han, K.S.,
51. “Failure of Carbon/Epoxy Composite Tubes
52. under Combined Axial and Torsional Loading-
53. Fracture Morphology and Failure Mechanism”,
54. Composite Science and Technology, Cilt 59,
55. -1804, 1999.
56. Chun, C.K. ve Dong, S.B., “Finite Element Analysis
57. of Shear Deformation in Laminated Anisotropic Shells of Revolution”, Journal of Sound and
58. Vibration, Cilt 218, No 1, 164-176, 1998.
59. Kim, K. ve Voyiadjis, G.Z., “Buckling Strength
60. Prediction of CFRP Cylindrical Panels Using
61. Finite Element Method”, Composites: Part A,
62. Cilt 30, 1093-1104, 1999.
63. Frostig, Y. ve Simitses, G.J., “Similitude of
64. Sandwich Panels with a Soft Core in Buckling”,
65. Composites: Part B , Cilt 35, 599-608, 2004.
66. Han, J.H., Kardomateas, G.A. ve Simitses, G.J.,
67. “Elasticity Shell Theory and Finite Element
68. Results for the Buckling of Long Sandwich
69. Cylindrical Shells under External Pressure”,
70. Composites: Part B , Cilt 35, 591-598, 2004.
71. Paimushin, V.N., Ivanov, V.A., Lukankin, S.A.,
72. Bushkov, A.A. ve Vyalkov, A.E., “Shear
73. Buckling Modes of Cylindrical Sandwich Shells
74. under External Pressure Tension-Compression of
75. Bearing Layers with Unequal Forces and in
76. Homogeneous Across the Thickness Temperature”,
77. Mechanics of Composite Materials, Cilt 41, No
78. , 23-32, 2005.
79. Combescure, A. ve Gusic, G., “Nonlinear
80. Buckling of Cylinders under External Pressure
81. with Nonaxisymmetric Thickness Imperfections
82. Using the COMI Axisymmetric Shell Element”,
83. Int. J. Solids and Structures, Cilt 38, 6207-
84. , 2001.
85. Piening, H.R.M., Farshad, M., Geier, B. ve
86. Zimmermann, R., “Buckling Loads of CFRP
87. Composite under Combined Axial and Torsion
88. Loading-Experiments and Computations”, Composite
89. Structures, Cilt 23, 427-435, 2001.
90. Spagnoli, A., Elghazouli, A.Y., ve
91. Chryssanthopoulos, M.K., ”Numerical simulation
92. of glass-reinforced plastic cylinders under axial
93. compression”, Marine Structures, Cilt 14, 353-
94. , 2001. Chryssanthopoulos, M.K., Elghazouli,
95. A.Y. ve Esong, I.E., Validation of FE Models for
96. Buckling Analysis of Woven GFRP Shells,
97. Composite Structures, Cilt 49, 355-367, 2000.
98. Bisagni, C.,”Numerical Analysis and Experimental
99. Correlation of Composite Shell Buckling and Post-
100. Buckling”, Composites: Part B, Cilt 31, 655-667,
101. -
102. Sivri,C., Anizotrop Kompozit Silindirlerin
103. Stabilite Analizinde Denge Denklemlerinin
104. Açılımlarının İncelenmesi, Yüksek Lisans Tezi,
105. Gazi Üniversitesi, Fen Bilimleri Enstitüsü,
106. Ankara, Şubat, 2005.
107. Reddy, J. N., Mechanics of Laminated
108. Composite Plates-Theory and Analysis, CRC
109. Press, USA, 1996.
110. Flügge, W., Stresses in Shells, Springer-Verlag,
111. Berlin, 1990.
112. Calcote,L. R., The Analysis of Laminated
113. Composite Structures, Van Nostran Reinhold
114. Company, New York, 1969.
115. Ugural, A.C., Stresses in Plates and Shells,
116. McGraw-Hill, Singapore, 1999.