Akımsız Ni-B kaplama ile demir esaslı toz metal kompaktların yüzey özelliklerinin geliştirilmesi

Yıl 2018, Cilt: 33 Sayı: 4, 1603 - 1610, 19.12.2018

Ulaş Matik

https://doi.org/10.17341/gazimmfd.416455

Cited By: 1

Öz

Demir esaslı toz metal (TM) kompaktların sertlik, sürtünme, aşınma ve korozyon dayanımına akımsız Ni-B kaplamanın etkisi incelendi. Bu amaçla, toz metalürjisi yöntemiyle üretilen demir esaslı TM kompaktlar çok ince akımsız Ni-P kaplandıktan sonra akımsız Ni-B kaplama işlemi uygulandı. Akımsız Ni-B kaplanmış ve kaplanmamış TM kompaktlar taramalı elektron mikroskobu (SEM), X-ışını kırınım analizi (XRD), enerji dağılımlı X-ışını spektroskopisi (EDX) ve mikrosertlik ölçümleri ile karaktereze edildi. Tribolojik özellikler pin-on-disk tipi aşınma cihazı kullanılarak 10, 20 ve 30 N’luk yükler altında, 1 ms^-1 sürtünme hızında ve 1000 m sürtünme mesafesinde belirlendi. Korozyon dayanımları potansiyodinamik polarizasyon ölçümleri ile tespit edildi. Sonuçlar, akımsız Ni-B kaplamanın amorfsu yapıda ve sütunsu bir büyüme morfolojisine sahip olduğunu göstermiştir.  Mikrosertlik ve tribolojik testler Ni-B kaplamanın sahip olduğu yüksek sertlik ve morfolojik özellikleri ile TM kompaktların aşınma ve sürtünme özelliklerini iyileştirdiğini göstermiştir. Akımsız Ni-B kaplama TM kompaktların korozyon direncinde kayda değer bir artış meydana getirmiştir. 

Anahtar Kelimeler

Toz metalürjisi, akımsız kaplama, Ni-B, aşınma, korozyon

Kaynakça

• Etaat, M., Emamy, M., Ghambari, M., Fadaei, E., Surface treatment and nickel plating of iron powder metallurgy parts for corrosion protection, Materials and Design, 30, 3560–3565, 2009.
• Danninger, H., Gierl-Mayer, C., Advanced powder metallurgy steel alloys, Advances in powder metallurgy: properties, processing and applications, Woodhead Publishing, 149–201, 2013.
• De Mello, J. D. B., Binder, C., Binder, R., Klein, A. N., Effect of nature of nitride phases on microabrasion of plasma nitrided sintered iron, Tribology - Materials, Surfaces, Interfaces, 4, 191–196, 2010.
• Steimbreger, C., Vuorinea, E., Johansson, P., Wear Analysis of PM compacts with bainitic microstructures, under unlubricated sliding conditions, Procedia Materials Science, 9, 578–589, 2015.
• Matik, U., Çıtak, R., Influence of the heat treatment on hardness and adhesive wear performance of Ni-P deposit with low phosphorus content, Materials Testing, 57, 431–436, 2015.
• Matik, U., Structural and wear properties of heat-treated electroless Ni-P alloy and Ni-P-Si3N4 composite coatings on iron based PM compacts, Surface and Coatings Technology, 302, 528–534, 2016.
• Sudagar, J., Lian, J., Sha, W., Electroless nickel, alloy, composite and nano coatings - A critical review, Journal of Alloys and Compounds, 571, 183–204, 2013.
• Krishnaveni, K., Sankara Narayanan, T. S. N., Seshadri, S. K., Electroless Ni-B-Si3N4 composite coating: deposition and evaluation of its characteristic properties, Synthesis and Reactivity in Inorganic, Metal-Organic, and Nano-Metal Chemistry, 42, 920–927, 2012.
• Narayanan, T. S. N. S., Krishnaveni, K., Seshadri, S. K., Electroless Ni–P/Ni–B duplex coatings: preparation and evaluation of microhardness, wear and corrosion resistance, Materials Chemistry and Physics, 82, 771–779, 2003.
• Vitry, V., Kanta, A.-F., Delaunois, F., Mechanical and wear characterization of electroless nickel-boron coatings. Surface and Coatings Technology, 206, 1879–1885, 2011.
• Vitry, V., Sens, A., Kanta, a. F., Delaunois, F., Wear and corrosion resistance of heat treated and as-plated Duplex NiP/NiB coatings on 2024 aluminum alloys, Surface and Coatings Technology, 206, 3421–3427, 2012.
• ASTM G102., Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements, Annual book of ASTM standards, 03.02, 416–422, 1994.
• Srinivasan, K. N., Meenakshi, R., Santhi, A., Thangavelu, P. R., S. John, S., Studies on development of electroless Ni–B bath for corrosion resistance and wear resistance applications, Surface Engineering, 26(3), 153-158, 2017.
• Delaunois, F., Lienard, P., Heat treatments for electroless nickel – boron plating on aluminium alloys, Surface and Coatings Technology, 160, 239–248, 2002.
• Niksefat, V., Ghorbani, M., Mechanical and electrochemical properties of ultrasonic-assisted electroless deposition of Ni-B-TiO2 composite coatings, Journal of Alloys and Compounds, 633, 127–136, 2015.
• Vitry, V., Delaunois, F., Nanostructured electroless nickel-boron coatings for wear resistance, Anti-Abrasive Nanocoatings, Elsevier, 157–199, 2015.
• Vitry, V., Kanta, A. F., Delaunois, F., Initiation and formation of electroless nickel–boron coatings on mild steel: Effect of substrate roughness, Materials Science and Engineering: B, 175, 266–273, 2010.
• Krishnaveni, K., Seshadri, S. K., Electroless Ni-B and Ni-B-Si3N4 composite Coatings - their role in surface engineering, International Symposium of Research Students on Materials Science and Engineering, India, 1–9, 2004.
• Madah, F., Amadeh, A. A., Dehghanian, C., Investigation on the phase transformation of electroless Ni-B coating after dry sliding against alumina ball, Journal of Alloys and Compounds, 658, 272–279, 2016.
• Madah, F., Dehghanian, C., Amadeh, A. A., Investigations on the wear mechanisms of electroless Ni-B coating during dry sliding and endurance life of the worn surfaces, Surface and Coatings Technology, 282, 6–15, 2015.
• Krishnaveni, K., Sankara Narayanan, T. S. N., Seshadri, S. K., Electroless Ni–B coatings: preparation and evaluation of hardness and wear resistance, Surface and Coatings Technology, 190, 115–121, 2005.
• Krishnaveni, K., Sankara Narayanan, T. S. N., Seshadri, S. K., Electroless Ni-B-Si3N4 Composite Coating: Deposition and Evaluation of Its Characteristic Properties. Synthesis and Reactivity in Inorganic, Metal-Organic and Nano-Metal Chemistry, 42, 920–927, 2012.
• Bülbül, F., Çelik, İ., Effect of heat treatment on structure of electroless Ni-B coated pure titanium, Journal of the Faculty of Engineering and Architecture of Gazi University, 29, 89–94, 2014.
• Gilley, K. L., Nino, J. C., Riddle, Y. W., Hahn, D. W., Perry, S. S., Heat treatments modify the tribological properties of nickel boron coatings, ACS Applied Materials and Interfaces, 4, 3069–3076, 2012.