2 BOYUTLU ÇİZİMLERDEN 3 BOYUTLU KATI MODELLERİN OTOMATİK ELDE EDİLMESİ

Yıl 2005, Cilt: 20 Sayı: 3, 0 - , 10.04.2013

Adem Çiçek Mahmut Gülesin

Öz

Bu makalede, 2 boyutlu çizimlerden 3 boyutlu katı modellerin otomatik olarak elde edilmesi konusunda bir çalışma yapılmıştır. AutoCAD ortamında kullanıcı tarafından oluşturulan 2 boyutlu silindirik ve prizmatik parça­lar DXF (Data Exchange Format) formatında kaydedilmekte ve geliştirilen program, oluşturulan parçanın DXF dosyasını kullanarak silindirik ve prizmatik parçaların unsurlarını çıkarmaktadır. Aynı zamanda, geometrik bilgi program tarafından değerlendirilerek, silindirik ve prizmatik katıların birincil ilkelleri ve unsur hacimleri dönel ve doğrusal süpürme operasyonları ile elde edilir. Daha sonra, unsur hacimleri Boolean operasyonları yardımıyla birincil ilkellerden çıkarılır ve silindirik çözüm nesnesi tamamlanır. Prizmatik çözüm nesnesi ise birincil ilkeller bir araya getirilerek elde edilmiştir. Programlama dili  olarak VisualLISP programlama  dili  kullanılmıştır.

Anahtar Kelimeler

3 boyutlu katı model, otomatik yapılandırma, DXF formatı.

Kaynakça

• Gülesin, M., “MCAD-2 ½ Boyutlu Bilgisayar Destekli Tasarım Programı”, İ.T.Ü. Makina Fa-kültesi 1. Makina Mühendisliği Kongresi, 275-283, 1997.
• Idesawa, M., “A System to Generate a Solid Figure from Three View”, Bulletin of JSME, Cilt 16, 216-225, 1973.
• Lafue, G., “Recognition of Three Dimensional Ob¬jects from Orthographic Views”, ACM/SIGGRAPH, 103-108, 1976.
• Woo, T.C., Hammer, J.M., “Reconstruction of Three Dimensional Designs from Orthographic Projections”, Proc. Ninth CIRP Conference, 247-255, 1977.
• Preiss, K., “Algorithms for Automatic Conversion of a 3 View Drawing of a Plane Faced Part to the 3-D Representation” Computers in Industry, Cilt 2, 133-139, 1981.
• Markowsky, G., Wesley, M.A., “Fleshing out Projections”, IBM Journal Research and Development, Cilt 25, 934-954, 1981.
• Haralick, R.M., Queeney, D., “Understanding Engineering Drawings”, Computer Graphics and Image Processing, Cilt 20, 244-258, 1982.
• Sakurai, H., Gossard, D.C., “Solid Model Input Through Orthographic Views”, ACM/SIGGRAPH, Cilt 17, 243-252, 1983.
• Preiss, K., “Constructing the Solid Representation from Engineering Projections”, Computers and Graphics, Cilt 8, 381-389, 1984.
• Nagendra, I.V., Gujar, U.G., “3-D Objects from 2-D Ortoghraphic Views–A Survey” Com¬puters and Graphics, Cilt 12, No 1, 111-114, 1988.
• Richards, T.H., Onwubolu, G.C., “Automatic Interpretation of Engineering Drawings for 3D Surface Representation in CAD”, Computer Aided Design, Cilt 18, No 3, 156-160, 1986.
• Lequette, R., “Automatic Construction of Curvilinear Solids from Wireframe Views”, Computer Aided Design, Cilt 20, No 4, 171-180, 1988.
• Ghosh, S.K., Li, Y.B., Munns, A.K., Wang, X.C., “Generating Solid Models from Two Dimensional Representations”, Journal of Materials Process-ing Tecnology, Cilt 54, 211-217, 1995.
• Gujar, U.G., Nagendra, I.V., “Construction of 3D Solid Objects from Orthographic Views”, Computers and Graphics, Cilt 13, No 4, 505-521, 1989.
• Wang, W., Grinstein, G.G., “A Survey of 3D Solid Reconstruction from 2D Projection Line Drawings”, Computer Graphics Forum, Cilt 12, No 2, 137-158, 1993.
• Chen, Z., Perng, D.B., Chen, C.J., Wu, C.S., “Fast Reconstruction of 3D Mechanical Parts from 2D Orthographic Views with Rules”, International Journal Computer Integrated Manufacturing, Cilt 5, No 1, 2-9, 1992.
• Yan, Q.W., Chen, C.L.P., Tang, Z., “Efficient Algorithm for the Reconstruction of 3D Objects from Orthographic Projections”, Computer Aided Design, Cilt 26, No 9, 699-717, 1994.
• Watanabe, T., Tashiro, A., Fujii, S., “Estimation of Three Dimensional Objects from Orthographic Views with Inconcistencies”, Computers and Graphics, Cilt 19, No 6, 815-829, 1995.
• You, C.F., Yang, S.S., “Reconstruction of Curvilinear Manifold Objects from Orthographic Views”, Computers and Graphics, Cilt 20, No 2, 275-293, 1996.
• Masuda, H., Numao, M., “A Cell Based Approach for Generating Solid Objects from Orthographic Projections”, Computer Aided Design, Cilt 29, No 3, 177-187, 1997.
• Tanaka, M., Iwama, K., Hosada, A., Watanabe, T., “Decomposition of a 2D Assembly Drawing into 3D Part Drawings”, Computer Aided Design, Cilt 30, No 1, 37-46, 1998.
• Shin, B.S., Shin, Y.G., “Fast 3D Solid Model Reconstruction from Orthographic Views”, Com-puter Aided Design, Cilt 30, No 1, 63-76, 1998.
• Liu, S. X., Hu, S. M., Chen, Y. J., Sun, J. G., “Reconstruction of Curved Solids From Engineer-ing Drawings”, Computer Aided Design, Cilt 33, 1059-1072, 2001.
• Aldefeld, B., “On Automatic Recognition of 3D Structures from 2D Representations”, Computer Aided Design, Cilt 15, No 2, 59-72, 1983.
• Bin, H., “Inputting Constructive Solid Geometry Representations Directly from 2D Orthographic Engineering Drawings”, Computer Aided Design, Cilt 18, No 3, 147-155, 1986.
• Chen, Z., Perng, D.B., “Automatic Reconstruction of 3D Solid Objects from 2D Orthographic Views”, Pattern Recognition Society, Cilt 21, No 5, 439-449, 1988.
• Shum, S.S.P., Lau, W.S., Yuen, M.M.F., Yu, K.M., “Solid Reconstruction from Orthographic Opaque Views Using Incremental Extrusion”, Computers and Graphics, Cilt 21, No 6, 787-800, 1997.
• Lim, T.C., Ensz, T.M., Ganter, A.M., Storti, W.D., “Object Reconstruction from Layered Data Using Implicit Solid Modelling”, Journal of Manufacturing Systems, Cilt 16, No 4, 260-272, 1997.
• Peterson, D.P., “Boundary to Constructive Solid Geometry Mappings: a Focus on 2D Issues”, Computer Aided Design, Cilt 18, No 1, 3-14, 1986.
• Gardan, Y., Perin, E., “An Algorithm Reducing 3D Boolean Operations to a 2D Problem: Concepts and Results”, Computer Aided Design, Cilt 28, No 4, 277-287, 1996.
• Masuda, H., “Topological Operators and Boolean Operations for Complex-Based Nonmanifold Geometric Models”, Computer Aided Design, Cilt 25, No 2, 119-129, 1993.
• Shum, S.S.P., Lau, W.S., Yuen, M.M.F., Yu, K.M., “Solid Reconstruction from Orthographic Views Using 2-Stage Extrusion”, Computer Aided Design, Cilt 33, 91-102, 2001.