FİBER KOMPOZİT ÇOK KATLI TÜPSEL SİLİNDİRLERİN BURULMA EKSENEL BASKI YÜKÜ VE DIŞ BASINÇ YÜKLEMELERİ ALTINDA BURKULMA DENKLEMLERİNİN ÇIKARILIŞLARI

Yıl 2006, Cilt: 21 Sayı: 2, 327 - 339, 01.03.2013

Ezgi Günay Cihan Sivri

Öz

Bu çalışmada, çok katlı fiber kompozit silindirlerin denge denklemleri aynı anda etkiyen burulma, eksenel yük ve dış basınç yüklemeleri altında burkulma analizi için incelenmiştir. Denge denklemleri, Klasik ve Birinci Mertebeden Kayma Deformasyon Teorilerine göre olmak üzere her ikisi içinde, iki grup çıkarımlarda matris formunda elde edilmişlerdir. Bu denklemlerin her birinde, başlangıç gerilme yüklemelerinin etkisi dikkate alınmıştır. Bütün bu ifadeler, üç değişik yüklemenin aynı anda etkidiği fiber kompozit silindirin denge
denklemleridir. Daha önce tanımlanmış olan iki ana teoriye göre çözümleme yapabilmek için, yerdeğiştirmeler cinsinden elde edilen denge denklemleri ilgili yaklaşık seri açılımları ile birlikte kullanılarak tanımlanmışlardır. Elde edilen ifadeler, özdeğer probleminin sıkıştırılmış matris formunu veren şekliyle görülmüşlerdir.

Anahtar Kelimeler

Burkulma , ortotropik , fiber kompozit , denge denklemleri , özdeğer-problemi , silindir

DERIVATIONS OF BUCKLING EQUATIONS FOR THE MULTILAYERED FIBER COMPOSITE TUBULAR CYLINDERS UNDER TORSION AXIAL COMPRESSIVE LOAD AND EXTERNAL PRESSURE

Öz

In this study, equilibrium equations of multi-layered fiber composite cylinders under combined torsion, axial force and external pressure were examined for buckling analysis. Equations of equilibrium were obtained for both Classical and First Order Shear Deformation Theories in the two groups of derivations as matrix equation. In each of these equations, initial stress loading was included. All of these expressions are the equilibrium equations of fiber composite cylinder in which the three different type of loadings are acting simultaneously. In order to obtain the solutions corresponding to the previously described two main theories, displacement based equilibrium equations have been used by defining them with the related approximated series expansions. Equations appeared to be seen in the compressed matrix form of an eigenvalue problem.  

Kaynakça

• Etitum, P. ve Dong, S.B., “A Comparative Study
• of Stability of Laminated Anisotropic Cylinders
• under Axial Compression and Torsion”, Int. J.
• Solids Structures, Cilt 32, No (8/9), 1231-1246,
• -
• Dong, S.B. ve Etitum, P., “Three Dimensional
• Stability Analysis of Laminated Anisotropic
• Circular Cylinders”, Int. J. Solids Structures,
• Cilt 32, No (8/9), 1211-1230, 1995.
• Dong, S.B. ve Chun, C.K., “Shear Constitutive
• Relations for Laminated Anisotropic Shells and
• Plates. Part I-Methodology”, J. Appl. Mech. Cilt
• , No 2, 372-379,1992.
• Dong, S.B. ve Etitum, P., “Three Dimensional
• Stability Analysis of Laminated Anisotropic
• Cylinders”, Int. J. Solids Structurals, Cilt 31,
• , 1994.
• Dong, S.B., Pister, K.S. ve Taylor, R.L., “On the
• Theory of Laminated Anisotropic Shells and
• Plates”, J. Aeorospace Sci., Cilt 29, No 89, 969-
• , 1962.
• Etitum,P., “Stability Analysis of Laminated
• Composite Cylinders”, Ph.D. Dissertation,
• Department of Civil and Environmental
• Engineering, University of California, Los
• Angeles, CA., 1993.
• Dong, S.B. ve Wolf, J.A., “Stability Analysis of
• Structures by a Reduced System of Generalized
• Coordinates”, Int. J. Solids Structures, Cilt 6,
• -1388, 1970.
• Dong, S.B.,Wolf, J.A ve Peterson, F.E., “On a
• Direct Iterative Eigensolution Technique”, Int. J.
• Numer. Meth. Engng, Cilt 4, 155-162, 1972.
• Tennyson, R.C., “Buckling of Laminated Composite
• Cylinders: A Review”, Composites, 17-24, 1975.
• Lou, K.A. ve Yaniv, G., “Buckling of Circular
• Cylindrical Composite Shells under Axial
• Compression and Bending Loads”, Journal of
• Composite Materials, Cilt 25, 162-187, 1991.
• Rezaeepazhand, J. ve Simitses, G.J., “Structural
• Similitude for Vibration Response of Laminated
• Cylindrical Shells with Double Curvature”,
• Composites: Part B, 28, 195-200, 1997.
• Lee, C.S., Hwang, W., Park, H.C. ve Han, K.S.,
• “Failure of Carbon/Epoxy Composite Tubes under
• Combined Axial and Torsional Loading- 1. Experimental
• Results and Prediction of Biaxial Strength by
• the Use of Neutral Networks”, Composite Science
• and Technology, Cilt 59, 1779-1788, 1999.
• Lee, C.S., Hwang, W., Park, H.C. ve Han, K.S.,
• “Failure of Carbon/Epoxy Composite Tubes
• under Combined Axial and Torsional Loading-
• Fracture Morphology and Failure Mechanism”,
• Composite Science and Technology, Cilt 59,
• -1804, 1999.
• Chun, C.K. ve Dong, S.B., “Finite Element Analysis
• of Shear Deformation in Laminated Anisotropic Shells of Revolution”, Journal of Sound and
• Vibration, Cilt 218, No 1, 164-176, 1998.
• Kim, K. ve Voyiadjis, G.Z., “Buckling Strength
• Prediction of CFRP Cylindrical Panels Using
• Finite Element Method”, Composites: Part A,
• Cilt 30, 1093-1104, 1999.
• Frostig, Y. ve Simitses, G.J., “Similitude of
• Sandwich Panels with a Soft Core in Buckling”,
• Composites: Part B , Cilt 35, 599-608, 2004.
• Han, J.H., Kardomateas, G.A. ve Simitses, G.J.,
• “Elasticity Shell Theory and Finite Element
• Results for the Buckling of Long Sandwich
• Cylindrical Shells under External Pressure”,
• Composites: Part B , Cilt 35, 591-598, 2004.
• Paimushin, V.N., Ivanov, V.A., Lukankin, S.A.,
• Bushkov, A.A. ve Vyalkov, A.E., “Shear
• Buckling Modes of Cylindrical Sandwich Shells
• under External Pressure Tension-Compression of
• Bearing Layers with Unequal Forces and in
• Homogeneous Across the Thickness Temperature”,
• Mechanics of Composite Materials, Cilt 41, No
• , 23-32, 2005.
• Combescure, A. ve Gusic, G., “Nonlinear
• Buckling of Cylinders under External Pressure
• with Nonaxisymmetric Thickness Imperfections
• Using the COMI Axisymmetric Shell Element”,
• Int. J. Solids and Structures, Cilt 38, 6207-
• , 2001.
• Piening, H.R.M., Farshad, M., Geier, B. ve
• Zimmermann, R., “Buckling Loads of CFRP
• Composite under Combined Axial and Torsion
• Loading-Experiments and Computations”, Composite
• Structures, Cilt 23, 427-435, 2001.
• Spagnoli, A., Elghazouli, A.Y., ve
• Chryssanthopoulos, M.K., ”Numerical simulation
• of glass-reinforced plastic cylinders under axial
• compression”, Marine Structures, Cilt 14, 353-
• , 2001. Chryssanthopoulos, M.K., Elghazouli,
• A.Y. ve Esong, I.E., Validation of FE Models for
• Buckling Analysis of Woven GFRP Shells,
• Composite Structures, Cilt 49, 355-367, 2000.
• Bisagni, C.,”Numerical Analysis and Experimental
• Correlation of Composite Shell Buckling and Post-
• Buckling”, Composites: Part B, Cilt 31, 655-667,
• -
• Sivri,C., Anizotrop Kompozit Silindirlerin
• Stabilite Analizinde Denge Denklemlerinin
• Açılımlarının İncelenmesi, Yüksek Lisans Tezi,
• Gazi Üniversitesi, Fen Bilimleri Enstitüsü,
• Ankara, Şubat, 2005.
• Reddy, J. N., Mechanics of Laminated
• Composite Plates-Theory and Analysis, CRC
• Press, USA, 1996.
• Flügge, W., Stresses in Shells, Springer-Verlag,
• Berlin, 1990.
• Calcote,L. R., The Analysis of Laminated
• Composite Structures, Van Nostran Reinhold
• Company, New York, 1969.
• Ugural, A.C., Stresses in Plates and Shells,
• McGraw-Hill, Singapore, 1999.