BibTex RIS Kaynak Göster

TAM ZAMANINDA ÜRETİM SİSTEMİNDE BAKIM POLİTİKALARININ ETKİSİ

Yıl 2007, Cilt: 22 Sayı: 1, 0 - , 15.02.2013

Öz

Tam Zamanında Üretim (TZÜ) sisteminde ara stok seviyesi düşük olduğu için makine arızaları sisteminverimliliği üzerinde büyük bir etkiye sahiptir. Bu nedenle bu çalışmada, tek ürünlü, çok hatlı ve çok aşamalı birTZÜ sisteminde düzeltici ve koruyucu bakım politikalarının, kanban sayısının ve makinelerin arızalar arasıortalama sürelerinin etkisi benzetim tekniği kullanılarak incelenmiştir. Sistemde izin verilen kanban sayısı,arızalar arası ortalama süre ve koruyucu bakım politikaları dikkate alınarak yapılan bu deney tasarımı uyarınca,hangi koşullarda hangi bakım politikalarının performans ölçütleri üzerinde etkisi olduğu ayrıca incelenmiştir.

Kaynakça

  • Monden, Y., Toyota Production System, Practical
  • Approach to Production Management, Institue
  • of Industrial Engineering, Norcross, GA, 1983.
  • Schonberger, R.J., “Japanese Manufacturing Techniques:
  • Nine Hidden Lessons in Simplicity”, The
  • Free Press, NewYork, 1982.
  • Hall, R.W., Zero Inventories, Business One Irwin,
  • Homewood, IL, 1983.
  • Im, J.H., “Lessons from Japanese Production
  • Management”, Production and Inventory Management,
  • Cilt 30, 25-29, 1989.
  • Sohal, A.S., Keller, A.Z., and Fouad, R.H., “A
  • Review of Literature Relating to JIT”, International
  • Journal of Operation and Production Management,
  • Cilt 9, 15-25, 1988.
  • Huang, P.Y., Houck, B.L.W., “Cellular Manufacturing;
  • an Overview and Bibliography”, Production and
  • Inventory Management, Cilt 26, 83-93, 1985.
  • Trevelen, M., “A Review of the Dual Resource
  • Constrained Systems Research”, IIE Transactions,
  • Cilt 21, 279-287, 1989.
  • Golhar, D.Y., Stamm, C.L., “The Just in Time
  • Philosophy: A Literature Review”, International
  • Journal of Production Research, Cilt 29, Sayı 4,
  • -676, 1991.
  • Philipoom, P.R., Rees, L.P., Taylor, B.W., Huang,
  • P.Y., “An Investigation of the Factors Influencing
  • the Number of Kanbans Required in the Implementation
  • of the JIT Technique with Kanbans”,
  • International Journal of Production Research,
  • Cilt 25, Sayı 1, 457-472, 1987.
  • Huang, P.Y., Rees, L.P., Taylor, R.W., “A Simulation
  • Analysis of the Japanese Just-In-Time Technique
  • (with kanbans) for Multi-Line, Multi-Stage Production
  • Systems”, Decision Sicences, Cilt 14, 326-344, 1983.
  • Sarker, B.R., Harris, R.D., “The Effect of
  • Imbalance in A Just-In-Time Production System:
  • A Simulation Study”, International Journal of
  • Production Research, Cilt 26, Sayı 1, 1-18, 1988.
  • Sarker, B.R., “Simulating A Just-In-Time System”,
  • Computers and Industrial Engineering, Cilt 16,
  • Sayı 1, 127-137, 1989.
  • Sarker, B.R., Fitzsimmons, J.A., “The Performance
  • of Push and Pull Systems: A Simulation and Comparative
  • Study”, International Journal of Production
  • Research, Cilt 27, Sayı 1, 1715-1731, 1989.
  • Sarker, B.R., “Service Time Distributions and the
  • Performance of A Pull System: A Simulation
  • Study”, Production Planning and Control, Cilt 2,
  • Sayı 1, 36-43, 1991.
  • Erol, S., Baykoç, Ö.F., Erol, Y., “Bir JIT Üretim
  • Sisteminin Performansını İyileyen Üretim Büyüklüklerinin
  • Belirlenmesi”, G.Ü. Fen Bilimleri Dergisi,
  • Cilt 9, Sayı 3, 489-502, 1996.
  • Baykoç, Ö.F., Erol, S., “Simulation Modelling and
  • Analysis of a JIT Production System”, International
  • Journal of Production Economics, Cilt 55, 203-
  • , 1998.
  • Dengiz, B., Akbay, K., “Computer Simulation of a
  • PCB Production Line: A Simulation Metamodeling
  • Approach”, International Journal of Production
  • Economics, Cilt 63, 195-205, 2000.
  • Alabaş, Ç., Altıparmak, F., Dengiz, B., “A Comparison
  • of the Performance of Artificial Intelligence Techniques
  • for Optimizing the Number of Kanbans”,
  • Journal of the Operational Research Society,
  • Cilt 53, 907-914, 2002.
  • Tajiri, M., Gotoh, F., TPM Implementation: A
  • Japanese Approach, McGraw-Hill, NewYork, 1992.
  • Corder, A.S., Maintenance Management Techniques,
  • McGraw-Hill, 1976.
  • Albino, V., Gianni, C., Okogbaa, O.G., “Maintenance
  • Policisies in Just In Time Manufacturing Lines”,
  • International Journal of Production Research,
  • Cilt 30, Sayı 2, 369-382, 1992.
  • Abdulnour, G., Dudek, R.A., Smith, M.L., “Effect
  • of the Maintenance Policies on the Just In Time
  • Production Systems”, International Journal of
  • Production Research, Cilt 33, Sayı 2, 565-583, 1995.
  • Savsar, M., “Simulation Analysis of Maintenance
  • Policies in Just In Time Production Systems”,
  • International Journal of Operation and Production
  • Management, Cilt 17, Sayı 3, 256-266, 1997.
  • Azadivar, F., Shu, V., “Maintenance Policy
  • Selection for JIT Production Systems”, International
  • Journal of Production Research, Cilt 37,
  • Sayı 16, 3725-3738, 1999.
  • Flynn,B.B., “An Investigation of Critical Machines
  • Preventive Maintenance Policies For Group
  • Technology”, Proceedings of the 1987 Decision
  • Science Institute, Boston, M.A., 747-749, 1987.
  • Banerjee, A., Flynn, B.B., “A Simulation Study of
  • Some Maintenance Policies in a Group Technology
  • Shop”, International Journal of Production
  • Research, Cilt 25, Sayı 11, 1595-1609, 1987.
  • Vineyard, M.L., Meredith, J.R., “Effect of Maintenance
  • Policies on FMS Failures”, International
  • Journal of Production Research, Cilt 30, 2647-
  • , 1992.
  • Vineyard, M.L., Gaympah, K.A., Meredith, J.R.,
  • “An Evaluation of Maintenance Policies for
  • Flexible Manufacturing Systems: A Case Study”,
  • International Journal of Operation and Production
  • Management, Cilt 20, Sayı 4, 409-426, 2000.
  • Savsar, M., “Modeling and Analysis of A Flexible
  • Manufacturing Cell”, Proceedings of the 22nd
  • International Conference on Computers and
  • Industrial Engineering, 184-187, 1997b.
  • Savsar, M., “Reliability Analysis of A Flexible
  • Manufacturing Cell”, Reliability Engineering and
  • System Safety, Cilt 67, Sayı 2, 147-152, 2000.
  • Savsar, M., “Performance Analysis of An FMS
  • Operating Under Different Failure Rates and
  • Maintenance Policies”, International Journal of
  • Flexible Manufacturing Systems, Cilt 16, Sayı 3,
  • -249, 2005.
  • Kobbacy, K.A.H., “The Use of Knowledge-Based
  • Systems in Evaluation and Enhancement of
  • Maintenance Routines”, International Journal of
  • Production Economics, Cilt 24, 243-248, 1992.
  • Ulusoy, G., Or, I, Soydan, N., “Design and Implementation
  • of A Maintenance Planning and Control
  • System”, International Journal of Production
  • Economics, Cilt 24, 263-272, 1992.
Yıl 2007, Cilt: 22 Sayı: 1, 0 - , 15.02.2013

Öz

Kaynakça

  • Monden, Y., Toyota Production System, Practical
  • Approach to Production Management, Institue
  • of Industrial Engineering, Norcross, GA, 1983.
  • Schonberger, R.J., “Japanese Manufacturing Techniques:
  • Nine Hidden Lessons in Simplicity”, The
  • Free Press, NewYork, 1982.
  • Hall, R.W., Zero Inventories, Business One Irwin,
  • Homewood, IL, 1983.
  • Im, J.H., “Lessons from Japanese Production
  • Management”, Production and Inventory Management,
  • Cilt 30, 25-29, 1989.
  • Sohal, A.S., Keller, A.Z., and Fouad, R.H., “A
  • Review of Literature Relating to JIT”, International
  • Journal of Operation and Production Management,
  • Cilt 9, 15-25, 1988.
  • Huang, P.Y., Houck, B.L.W., “Cellular Manufacturing;
  • an Overview and Bibliography”, Production and
  • Inventory Management, Cilt 26, 83-93, 1985.
  • Trevelen, M., “A Review of the Dual Resource
  • Constrained Systems Research”, IIE Transactions,
  • Cilt 21, 279-287, 1989.
  • Golhar, D.Y., Stamm, C.L., “The Just in Time
  • Philosophy: A Literature Review”, International
  • Journal of Production Research, Cilt 29, Sayı 4,
  • -676, 1991.
  • Philipoom, P.R., Rees, L.P., Taylor, B.W., Huang,
  • P.Y., “An Investigation of the Factors Influencing
  • the Number of Kanbans Required in the Implementation
  • of the JIT Technique with Kanbans”,
  • International Journal of Production Research,
  • Cilt 25, Sayı 1, 457-472, 1987.
  • Huang, P.Y., Rees, L.P., Taylor, R.W., “A Simulation
  • Analysis of the Japanese Just-In-Time Technique
  • (with kanbans) for Multi-Line, Multi-Stage Production
  • Systems”, Decision Sicences, Cilt 14, 326-344, 1983.
  • Sarker, B.R., Harris, R.D., “The Effect of
  • Imbalance in A Just-In-Time Production System:
  • A Simulation Study”, International Journal of
  • Production Research, Cilt 26, Sayı 1, 1-18, 1988.
  • Sarker, B.R., “Simulating A Just-In-Time System”,
  • Computers and Industrial Engineering, Cilt 16,
  • Sayı 1, 127-137, 1989.
  • Sarker, B.R., Fitzsimmons, J.A., “The Performance
  • of Push and Pull Systems: A Simulation and Comparative
  • Study”, International Journal of Production
  • Research, Cilt 27, Sayı 1, 1715-1731, 1989.
  • Sarker, B.R., “Service Time Distributions and the
  • Performance of A Pull System: A Simulation
  • Study”, Production Planning and Control, Cilt 2,
  • Sayı 1, 36-43, 1991.
  • Erol, S., Baykoç, Ö.F., Erol, Y., “Bir JIT Üretim
  • Sisteminin Performansını İyileyen Üretim Büyüklüklerinin
  • Belirlenmesi”, G.Ü. Fen Bilimleri Dergisi,
  • Cilt 9, Sayı 3, 489-502, 1996.
  • Baykoç, Ö.F., Erol, S., “Simulation Modelling and
  • Analysis of a JIT Production System”, International
  • Journal of Production Economics, Cilt 55, 203-
  • , 1998.
  • Dengiz, B., Akbay, K., “Computer Simulation of a
  • PCB Production Line: A Simulation Metamodeling
  • Approach”, International Journal of Production
  • Economics, Cilt 63, 195-205, 2000.
  • Alabaş, Ç., Altıparmak, F., Dengiz, B., “A Comparison
  • of the Performance of Artificial Intelligence Techniques
  • for Optimizing the Number of Kanbans”,
  • Journal of the Operational Research Society,
  • Cilt 53, 907-914, 2002.
  • Tajiri, M., Gotoh, F., TPM Implementation: A
  • Japanese Approach, McGraw-Hill, NewYork, 1992.
  • Corder, A.S., Maintenance Management Techniques,
  • McGraw-Hill, 1976.
  • Albino, V., Gianni, C., Okogbaa, O.G., “Maintenance
  • Policisies in Just In Time Manufacturing Lines”,
  • International Journal of Production Research,
  • Cilt 30, Sayı 2, 369-382, 1992.
  • Abdulnour, G., Dudek, R.A., Smith, M.L., “Effect
  • of the Maintenance Policies on the Just In Time
  • Production Systems”, International Journal of
  • Production Research, Cilt 33, Sayı 2, 565-583, 1995.
  • Savsar, M., “Simulation Analysis of Maintenance
  • Policies in Just In Time Production Systems”,
  • International Journal of Operation and Production
  • Management, Cilt 17, Sayı 3, 256-266, 1997.
  • Azadivar, F., Shu, V., “Maintenance Policy
  • Selection for JIT Production Systems”, International
  • Journal of Production Research, Cilt 37,
  • Sayı 16, 3725-3738, 1999.
  • Flynn,B.B., “An Investigation of Critical Machines
  • Preventive Maintenance Policies For Group
  • Technology”, Proceedings of the 1987 Decision
  • Science Institute, Boston, M.A., 747-749, 1987.
  • Banerjee, A., Flynn, B.B., “A Simulation Study of
  • Some Maintenance Policies in a Group Technology
  • Shop”, International Journal of Production
  • Research, Cilt 25, Sayı 11, 1595-1609, 1987.
  • Vineyard, M.L., Meredith, J.R., “Effect of Maintenance
  • Policies on FMS Failures”, International
  • Journal of Production Research, Cilt 30, 2647-
  • , 1992.
  • Vineyard, M.L., Gaympah, K.A., Meredith, J.R.,
  • “An Evaluation of Maintenance Policies for
  • Flexible Manufacturing Systems: A Case Study”,
  • International Journal of Operation and Production
  • Management, Cilt 20, Sayı 4, 409-426, 2000.
  • Savsar, M., “Modeling and Analysis of A Flexible
  • Manufacturing Cell”, Proceedings of the 22nd
  • International Conference on Computers and
  • Industrial Engineering, 184-187, 1997b.
  • Savsar, M., “Reliability Analysis of A Flexible
  • Manufacturing Cell”, Reliability Engineering and
  • System Safety, Cilt 67, Sayı 2, 147-152, 2000.
  • Savsar, M., “Performance Analysis of An FMS
  • Operating Under Different Failure Rates and
  • Maintenance Policies”, International Journal of
  • Flexible Manufacturing Systems, Cilt 16, Sayı 3,
  • -249, 2005.
  • Kobbacy, K.A.H., “The Use of Knowledge-Based
  • Systems in Evaluation and Enhancement of
  • Maintenance Routines”, International Journal of
  • Production Economics, Cilt 24, 243-248, 1992.
  • Ulusoy, G., Or, I, Soydan, N., “Design and Implementation
  • of A Maintenance Planning and Control
  • System”, International Journal of Production
  • Economics, Cilt 24, 263-272, 1992.
Toplam 124 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Bölüm Makaleler
Yazarlar

İsmail Karaoğlan Bu kişi benim

Fulya Altıparmak Bu kişi benim

Berna Dengiz Bu kişi benim

Yayımlanma Tarihi 15 Şubat 2013
Gönderilme Tarihi 15 Şubat 2013
Yayımlandığı Sayı Yıl 2007 Cilt: 22 Sayı: 1

Kaynak Göster

APA Karaoğlan, İ., Altıparmak, F., & Dengiz, B. (2013). TAM ZAMANINDA ÜRETİM SİSTEMİNDE BAKIM POLİTİKALARININ ETKİSİ. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, 22(1).
AMA Karaoğlan İ, Altıparmak F, Dengiz B. TAM ZAMANINDA ÜRETİM SİSTEMİNDE BAKIM POLİTİKALARININ ETKİSİ. GUMMFD. Mart 2013;22(1).
Chicago Karaoğlan, İsmail, Fulya Altıparmak, ve Berna Dengiz. “TAM ZAMANINDA ÜRETİM SİSTEMİNDE BAKIM POLİTİKALARININ ETKİSİ”. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 22, sy. 1 (Mart 2013).
EndNote Karaoğlan İ, Altıparmak F, Dengiz B (01 Mart 2013) TAM ZAMANINDA ÜRETİM SİSTEMİNDE BAKIM POLİTİKALARININ ETKİSİ. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 22 1
IEEE İ. Karaoğlan, F. Altıparmak, ve B. Dengiz, “TAM ZAMANINDA ÜRETİM SİSTEMİNDE BAKIM POLİTİKALARININ ETKİSİ”, GUMMFD, c. 22, sy. 1, 2013.
ISNAD Karaoğlan, İsmail vd. “TAM ZAMANINDA ÜRETİM SİSTEMİNDE BAKIM POLİTİKALARININ ETKİSİ”. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi 22/1 (Mart 2013).
JAMA Karaoğlan İ, Altıparmak F, Dengiz B. TAM ZAMANINDA ÜRETİM SİSTEMİNDE BAKIM POLİTİKALARININ ETKİSİ. GUMMFD. 2013;22.
MLA Karaoğlan, İsmail vd. “TAM ZAMANINDA ÜRETİM SİSTEMİNDE BAKIM POLİTİKALARININ ETKİSİ”. Gazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi, c. 22, sy. 1, 2013.
Vancouver Karaoğlan İ, Altıparmak F, Dengiz B. TAM ZAMANINDA ÜRETİM SİSTEMİNDE BAKIM POLİTİKALARININ ETKİSİ. GUMMFD. 2013;22(1).