FERRİTİK-PERLİTİK KÜRESEL GRAFİTLİ DÖKME DEMİRİN ADHESİF AŞINMA DAYANIMI ÜZERİNDE BORLAMA YÜZEY İŞLEMİNİN ETKİSİ
Öz
Bu çalışmada ferritik-perlitik küresel grafitli dökme demir malzemenin adhasif aşınma direnci üzerinde borlamaısıl işleminin etkisi araştırılmıştır. Borlama ısıl işlemi, 960 ºC’de 6 saat Ekabor II borlama malzemesindegerçekleştirilmiştir. Adhasif aşınma testleri disk üzerinde pim tipi aşınma cihazında 60 N yük altında 1 m/snkayma hızında ve 3600 m, 7200 m, 10800 m ve 21600 m kayma mesafesinde gerçekleştirilmiştir. Adhasifaşınma test sonuçları, borlanmış küresel grafitli dökme demirin adhasif aşınma direncinin, dökülmüş haldekiferritik-perlitk küresel grafitli dökme demirinkine göre 50 kat daha yüksek olduğunu göstermektedir.
Anahtar Kelimeler
Kaynakça
- Bejar, M.A. Moreno, E., “Abrasive wear
- resistance of boronized carbon and low-alloy
- steels”, Journal of Materials Processing
- Technology, 173, 352–358, 2006.
- Allaoui, O. Bouaouadja, N. Saindernan, G.,
- “Characterization of boronized layers on a XC38
- steel”, Surface & Coatings Technology, 201,
- –3482, 2006.
- Kulka, M. Pertek, A., “The importance of carbon
- content beneath iron borides after boriding of
- chromium and nickel-based low-carbon steel”,
- Applied Surface Science, 214, 161–171, 2003.
- BAŞTÜRK, S. ERTEN, “M. Borlama İle Yüzey
- Sertleştirme Çalışmaları”, Mühendis ve Makina,
- , 563, 57-74.
- Kuper U, A. Qiao,X. Stock, H.R., “Mayr, P. A
- novel approach to gas boronizing”, Surface and
- Coatings Technology, 130, 87-94, 2000.
- Usta, M. Ozbek, I Bindal, C. Ucisik,A. H.
- Ingoled, S. Liang, H., “A comparative study of
- borided pure niobium, tungsten and chromium”,
- Vacuum, 80, 1321–1325, 2006.
- Uzunov, N. Ivanov, R., “Aluminothermic powder
- boriding of steel”, Applied Surface Science,
- , 72–77, 2004.
- Selcuk, B. Ipek, R. Karamıs¸ M.B., “A study on
- friction and wear behaviour of carburized,
- carbonitrided and borided AISI 1020 and 5115
- steels”, Journal of Materials Processing
- Technology, 141, 189–196, 2003.
- Xia, Yan-qiu, Liu, Wei-Min, Yu, Lai-Gui, Han,
- Ning Xue, Qun-Ji, “Investigation on the
- tribological properties of boron and lanthanum
- permeated mild steel”, Materials Science and
- Engineering, A354, 17-23, 2003.
- Sen, S. Sen, U. Bindal, C., “Tribological
- properties of oxidised boride coatings grown on
- AISI 4140 steel”, Materials Letters, 60, 3481–
- , 2006.
- Mann, B.S., “Boronizing cast martensitic
- chromium nickel stainless steel and its abrasion
- and cavitation-erosion behaviour”, Wear, 208,
- -131, 1997.
- C.K.N. Oliveira, C.L. Benassi a, L.C. Casteletti,
- “Evaluation of hard coatings obtained on AISI
- D2 steel by thermo-reactive deposition
- treatment”, Surface & Coatings Technology,
- , 1880–1885, 2006.
- Bourithis, L. Papadimitriou, G., “Boriding a plain
- carbon steel with the plasma transferred arc
- process using boron and chromium diboride
- powders: microstructure and wear properties”,
- Materials Letters, 57, 1835– 1839, 2003.
- Sen, U. Sen, S, Yilmaz, F., “An evaluation of
- some properties of borides deposited on
- boronized ductile iron”, Journal of Materials
- Processing Technology, 148, 1–7, 2004.
- Yul Lee, Sang Kim, Gwang Seok, Kim, Bum-
- Suk, “Mechanical properties of duplex layer
- formed on AISI 403 stainless steel by chromizing
- and boronizing treatment”, Surface and
- Coatings Technology, 177–178, 178–184 2004.
- Çelikyürek, İ. Baksan, B. Gürler R., “Küresel
- Grafitti Dökme Demirlerin Borlanması”,
- Uluslararası Bor Sempozyumu, Eskişehir, 231-
- , 23-25 Eylül 2004.
- Sen, U. Sen,S. Yilmaz, F., “Effect of copper on
- boride layer of boronized ductile cast irons”,
- Vacuum, 72, 199–204, 2004.
- Sen, U, Sen, S., “The fracture toughness of borides
- formed on boronized cold work tool steels”,
- Materials Characterization, 50, 261–26, 2003.
- Şenel L., Çetin M., Gül, F., “Farklı Matriks
- Mikroyapılarına Sahip Kgdd’in Kuru Kayma
- Aşınmasının Değerlendirilmesi”, 3rd Internatıonal
- Advanced Technologıes Symposıum, Ankara,
- -166, 18-20 August 2003.
- Abedi, H. R. Fareghi, A. H. Kheirandish,
- Saghafian, SH., “Sliding wear behavior of a
- ferritic–pearlitic ductile cast iron with different
- nodule count”, Wear, Article in Press.
Yıl 2010,
Cilt: 25 Sayı: 2, 0 - , 19.02.2013
Öz
Kaynakça
- Bejar, M.A. Moreno, E., “Abrasive wear
- resistance of boronized carbon and low-alloy
- steels”, Journal of Materials Processing
- Technology, 173, 352–358, 2006.
- Allaoui, O. Bouaouadja, N. Saindernan, G.,
- “Characterization of boronized layers on a XC38
- steel”, Surface & Coatings Technology, 201,
- –3482, 2006.
- Kulka, M. Pertek, A., “The importance of carbon
- content beneath iron borides after boriding of
- chromium and nickel-based low-carbon steel”,
- Applied Surface Science, 214, 161–171, 2003.
- BAŞTÜRK, S. ERTEN, “M. Borlama İle Yüzey
- Sertleştirme Çalışmaları”, Mühendis ve Makina,
- , 563, 57-74.
- Kuper U, A. Qiao,X. Stock, H.R., “Mayr, P. A
- novel approach to gas boronizing”, Surface and
- Coatings Technology, 130, 87-94, 2000.
- Usta, M. Ozbek, I Bindal, C. Ucisik,A. H.
- Ingoled, S. Liang, H., “A comparative study of
- borided pure niobium, tungsten and chromium”,
- Vacuum, 80, 1321–1325, 2006.
- Uzunov, N. Ivanov, R., “Aluminothermic powder
- boriding of steel”, Applied Surface Science,
- , 72–77, 2004.
- Selcuk, B. Ipek, R. Karamıs¸ M.B., “A study on
- friction and wear behaviour of carburized,
- carbonitrided and borided AISI 1020 and 5115
- steels”, Journal of Materials Processing
- Technology, 141, 189–196, 2003.
- Xia, Yan-qiu, Liu, Wei-Min, Yu, Lai-Gui, Han,
- Ning Xue, Qun-Ji, “Investigation on the
- tribological properties of boron and lanthanum
- permeated mild steel”, Materials Science and
- Engineering, A354, 17-23, 2003.
- Sen, S. Sen, U. Bindal, C., “Tribological
- properties of oxidised boride coatings grown on
- AISI 4140 steel”, Materials Letters, 60, 3481–
- , 2006.
- Mann, B.S., “Boronizing cast martensitic
- chromium nickel stainless steel and its abrasion
- and cavitation-erosion behaviour”, Wear, 208,
- -131, 1997.
- C.K.N. Oliveira, C.L. Benassi a, L.C. Casteletti,
- “Evaluation of hard coatings obtained on AISI
- D2 steel by thermo-reactive deposition
- treatment”, Surface & Coatings Technology,
- , 1880–1885, 2006.
- Bourithis, L. Papadimitriou, G., “Boriding a plain
- carbon steel with the plasma transferred arc
- process using boron and chromium diboride
- powders: microstructure and wear properties”,
- Materials Letters, 57, 1835– 1839, 2003.
- Sen, U. Sen, S, Yilmaz, F., “An evaluation of
- some properties of borides deposited on
- boronized ductile iron”, Journal of Materials
- Processing Technology, 148, 1–7, 2004.
- Yul Lee, Sang Kim, Gwang Seok, Kim, Bum-
- Suk, “Mechanical properties of duplex layer
- formed on AISI 403 stainless steel by chromizing
- and boronizing treatment”, Surface and
- Coatings Technology, 177–178, 178–184 2004.
- Çelikyürek, İ. Baksan, B. Gürler R., “Küresel
- Grafitti Dökme Demirlerin Borlanması”,
- Uluslararası Bor Sempozyumu, Eskişehir, 231-
- , 23-25 Eylül 2004.
- Sen, U. Sen,S. Yilmaz, F., “Effect of copper on
- boride layer of boronized ductile cast irons”,
- Vacuum, 72, 199–204, 2004.
- Sen, U, Sen, S., “The fracture toughness of borides
- formed on boronized cold work tool steels”,
- Materials Characterization, 50, 261–26, 2003.
- Şenel L., Çetin M., Gül, F., “Farklı Matriks
- Mikroyapılarına Sahip Kgdd’in Kuru Kayma
- Aşınmasının Değerlendirilmesi”, 3rd Internatıonal
- Advanced Technologıes Symposıum, Ankara,
- -166, 18-20 August 2003.
- Abedi, H. R. Fareghi, A. H. Kheirandish,
- Saghafian, SH., “Sliding wear behavior of a
- ferritic–pearlitic ductile cast iron with different
- nodule count”, Wear, Article in Press.
Toplam 81 adet kaynakça vardır.
Ayrıntılar
| Birincil Dil | Türkçe |
|---|---|
| Bölüm | Makaleler |
| Yazarlar | |
| Yayımlanma Tarihi | 19 Şubat 2013 |
| Gönderilme Tarihi | 19 Şubat 2013 |
| Yayımlandığı Sayı | Yıl 2010 Cilt: 25 Sayı: 2 |