Investigation of Raw Material Properties of Turkoglu (Kahramanmaraş) Region Dolomites

Öz

This study was carried out with the aim of determining the raw material properties of the dolomites of the Turkoglu (Kahramanmaraş) region. In this study, samples were taken from the dolomites of occur widely area in Turkoglu (Kahramanmaraş) and firstly, the chemical composition, mineralogical structure, petrographic properties and physico-mechanical properties of the dolomite samples were determined and secondly, calcination experiments were carried out. Calcination experiments were carried out to determine the thermal behavior of dolomites under high temperature conditions. As a result of the study, it was understood that the examined dolomite samples could be used for building materials, lime, glass and refractories production etc.

Anahtar Kelimeler

• Dolomite
• Raw Material Properties
• Turkoglu (Kahramanmaraş)

Kaynakça

1. Barton, N., Choubey, V. 1977. The Shear Strength of Rock Joints in Theory and Practice. Rock Mechanics, 10, 1-65. Boynton, R.S., 1980. Chemistry and Technology of Lime and Limestone, (2nd ed), Wiley, New York.
2. Deere, D.U. and Miller, R.P. 1966. Engineering Classification and Index Properties of Rock, Technical Report Air Force Weapons Laboratory, New Mexico, p. 65-116.
3. Demirkol, C. 1988. Stratigraphy, Structural Geology and Geotectonic Evolution of Amanos Mountains West of Türkoğlu (K.Maraş). Bulletin of the Mineral Research and Exploration, 108(108), 1-1.
4. ISRM, 1979. Suggested Methods for Determining the Uniaxial Compressive Strength and Deformability of Rock Materials, Int J Rock Mech Min Sci. 16 (2), 135-140.
5. ISRM, 1981. Rock Characterization Testing and Monitoring, ISRM Suggested Method. Int. Soc. Rock Mech. 211.
6. Kılıç, Ö., 2006. The Influence of High Temperatures on Limestone P Wave Velocity and Schmidt Hammer Strength, Technical Note, International Journal of Rock Mechanics Mining Sciences, 43, 980-986.
7. Leighton, M. W., Pendexter, C. 1962. Carbonate Rock Types. Mem. Amer. Ass. Petrol. Geol. 1, 33–61.
8. Schmidt, E. 1951. A Non-Destructive Concrete Tester. Concrete, 59, 34-35.

9. Tarhan, F., 1989. Mühendislik Jeolojisi Prensipleri, KTÜ Yayınları, Trabzon.
10. TS EN 12407, 2019. Doğaltaşlar-Deney Yöntemleri-Petrografik inceleme, Türk Standartları Enstitüsü, Ankara.
11. TS EN 1367-2 (İngilizce Metin), 2010. Agregaların Termal ve Bozunma Özellikleri için Deneyler Bölüm 2: Magnezyum Sülfat Deneyi, Ankara.
12. TS EN 1097-6 (İngilizce Metin), 2013. Agregaların Mekanik ve Fiziksel Özellikleri için Deneyler Bölüm 6: Tane Yoğunluğu ve Su Emme Oranının Tayini, Ankara.
13. TS EN 1097-7 (İngilizce Metin), 2009. Agregaların Mekanik ve Fiziksel Özellikleri için Deneyler- Bölüm 7: Dolgu (filler) Tane Yoğunluğunun Tayini - Piknometre Yöntemi, Ankara.
14. TS EN 1744-1:2009+A1, 2013. Agregaların Kimyasal Özellikleri için Deneyler- Bölüm 1: Kimyasal Analiz. TSE, Ankara.
15. TS 699, 2009. Tabii Yapı Taşları-Muayene ve Deney Metotları. TSE, Ankara.
16. Warren, J. 2000. Dolomite: Occurrence, Evolution and Economically İmportant Associations, Earth-Science Reviews, Volume 52, Issues 1–3, Pages 1-81.