Effects of Exterior Wall Details and Building Locations on Energy Consumption of Residential Buildings in Turkey

Öz

The construction industry consumes energy throughout its life cycle. Countries that import most of the energy they consume are looking for ways to reduce the energy consumption of the construction sector. In this quest, the architectural design process and material decisions are important passive measures for reducing energy consumption. It is significant to determine the effects of external wall materials which have the largest surface area subjected to the climatic conditions where the buildings are located. In this study, by using the tracing technique, the external wall details of the residential projects in Ankara were examined, and effective parameters were used as input variables in energy modelling. The core materials used in the external walls were considered as the variables of this research since different types of materials were used according to geographical location despite being in the same climate zone. The energy consumption amounts were analyzed with the Green Building Studio program. In the analysis, the insulation materials and their thicknesses were kept constant. Results showed that while the wall details with the highest energy consumption were for the brick blocks in the Kızılcahamam region, the energy consumption for the pumice blocks in the Keçiören region was minimum. In conclusion, it is inferred that geographical location and wall core material type may increase energy consumption values up to 25%.

Anahtar Kelimeler

• Energy Analysis
• Exterior wall detail
• Building Location

Kaynakça

1. Aktemur, C., Atikol, U. 2017, Optimum Insulation Thickness for the Exterior Walls of Buildings in Turkey Based on Different Materials, Energy Sources and Climate Regions, International Journal of Engineering Technologies IJET 3(2):72-82
2. Algın, F., Alkan, M. (2019), ‘’Konut Stoğunda Duvarda Malzeme Seçimini Etkileyen Faktörler ve Sektör Aktörlerinin Malzeme Seçimlerinin Değerlendirilmesi,’’ İstanbul Sabahattin Zaim Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Retrieved From http://dergipark.gov.tr/izufbed
3. Arslan M. A. ve Aktaş M., “İnşaat sektöründe kullanılan yalıtım malzemelerinin ısı ve ses yalıtımı açısından değerlendirilmesi”, Politeknik Dergisi, 21(2): 299-320, (2018).
4. Bina Sektörü Enerji Verimliliği Teknoloji Atlası, (2021), Retrieved from: https://webdosya.csb.gov.tr/db/meslekihizmetler/icerikler/atlas_ocak_small-0210126120540
5. Bingöl, Ö. (2019), ‘’Production of Urban Space in Social Housing Settlements: İstanbul Kayabaşı 24th District Social Housing Settlement’’, MEGARON, 14(SUPPL. ):83-99 DOI: 10.14744/MEGARON.2019.92160
6. Çiftçi, E. & Balyemez, s. (2020), ‘’Enerji Verimliliği Açısından Yüksek Yapılar ve Sürdürebilirlik’’, Anadolu Bil Meslek Yüksekokulu Dergisi, 15(58), 27, 141. Retrieved from https://dergipark.org.tr/tr/pub/abmyoder/issue/59628/859125
7. Djamila, H.; Rajin, M.; Rizalman, A.N. Energy efficiency through building envelope in Malaysia and Singapore. J. Adv. Res. Fluid, Mech. Therm. Sci. 2018, 46, 96–105.
8. Demchak, G., Dzambazova, T., & Krygiel, E. (2009). ‘’Introducing Revit architecture 2009: BIM for beginners’’. John Wiley and Sons.

9. Ertürk, M., Keçebaş, A., Daşdemir, A., Kurt, H. (2016) ‘’Isıtma ve Soğutma Uygulamalarında Optimum Yalıtım Kalınlığı ve Enerji Tasarrufu Analizi,’’ 10th International Clean Energy Symposium, 24-26 October 2016, Istanbul, Turkey
10. GB studio https://www.bimcommunity.com/resources/load/323/green-building-studio
11. Huberman, N., and Pearlmutter, D. (2008). ''A life-cycle energy analysis of building materials in the Negev desert. Energy Build''. 40, 837–848. Doi: 10.1016/j.enbuild.2007.06.002
12. Hozatlı, B., Günerhan, H. (2015), ‘’Muğla İli Koşullarında Betonarme ve Ahşap İskeletli Binalara Ait Yaşam Döngüsü Analizi,’’ Mühendis ve Makina , 56 (660) , 52-60 . Retrieved from https://dergipark.org.tr/tr/pub/muhendismakina/issue/54192/733599
13. Karaca, M., Varol, Ç. (2012), ‘’Konut Alanlarında Enerji Etkinliği: Toplu Konut İdaresi Başkanlığı (TOKİ) Toplu Konut Projeleri Üzerine Eleştirel Bir Değerlendirme’’, METU Journal of the Faculty of Architecture, 29(2):127-141
14. Idchabania, R, Khyadb, A., Ganaoui, M. (2017), ‘Optimizing insulation thickness of external walls in cold region of Morocco based on life cycle cost analysis’, Energy Procedia 139, 117–12, Retrieved From https://www.sciencedirect.com/
15. İlerisoy, Z., Y.,, Tuna, M., E. (2018). Dikdörtgen Planlı Tünel Kalıp Kullanılan Betonarme Yapılarda Plan Boyutları ve Kat Adedinin Maliyete Etkileri. Yıldız Technical University Faculty of Architecture E-Journal (Megaron), 13(4), 559-568., Doi: 10.5505/MEGARON.2018.98698
16. Khandve, P. (2014), ‘’Cost Effectiveness of using AAC Blocks for Building Construction,’’ Conference: International Conference on Advances in Civil and Mechanical Engineering Systems, Government College of Engineering, Amravati in association with SVNIT, Surat, India
17. Knaack, U., Klein, T., Bilow, M., Auer, T. (2014), Façades Principles of Construction, Berlin/Boston
18. Koçu, N., Dereli, M. 2010. “Dış Duvarlarda Isı Yalıtımı ile Enerji Tasarrufu Sağlanması ve Detaylarda Karşılaşılan Sorunlar (Konya Kentinden Örnekler),” 5.Ulusal Çatı Cephe Sempozyumu, 15-16 Nisan 2010, Dokuzeylül Üniversitesi, Mimarlık Fakültesi, İzmir.
19. Koyun, T., Koç, E. (2017), ‘’Bir Binanın Değişken Cam ve Dış Duvar Tiplerine Göre Pencere/Duvar Alanı Oranlarının Bina Isı Kayıplarına Etkisi’’, Mühendis ve Makina cilt 58, sayı 688, s. 1-14.
20. Kumar, R., Thakur, A., Tiwary, A. (2021), ‘’A Comparative Study on Conventional Clay Bricks and Autoclaved Aerated Concrete Blocks’’, IOP Conf. Ser.: Earth Environ. Sci. 889 012061
21. Marwan, M.(2020), The effect of wall material on energy cost reduction in building, Case Studies in Thermal Engineering, Volume 17, February 2020, 100573
22. Özsoy, A. (2011), ‘’Toplu Konut Uygulamalarının Gelişimi’’, Ekoyapı Dergisi, Retrieved from https://www.ekoyapidergisi.org/toplu-konut-uygulamalarinin-gelisimi
23. Ozturk, H.K.; Canyurt, O.E.; Hepbasli, A.; Utlu, Z. Residential-commercial energy input estimation based on genetic algorithm (GA) approaches: An application of Turkey. Energy Build. 2004, 36, 175–183.
24. TS 825 BİNALARDA ISI YALITIM KURALLARI, RG.27291-Temmuz 2009-TS 825 Türkiye Isı Bölgeleri, (2015), Retrieved from https://servetblok.files.wordpress.com/2015/06/tc3bcrkiye-isi-bc3b6lgeleri.jpg
25. Usta, P., Zengin, B. (2021), ‘’The Energy Impact of Building Materials in Residential Buildings in Turkey’’, Materials 14(11), DOI:10.3390/ma14112793
26. Uzun, Ö., (2008), Bims Blok ile Örülen Dış Duvarların Yapısal Performansının Değerlendirilmesi Üzerine Bir Alan Araştrıması, Yüksek Lisans Tezi, İstanbul Teknik Üniversitesi
27. Yanga, C., Choib, J. (2015), ‘’Energy Use Intensity Estimation Method Based on Façade Features’’, International Conference on Sustainable Design, Engineering and Construction, Available online at www.sciencedirect.com
28. Yılmaz, E. (2016). ‘’Konut Sorunu Ve Toplu Konut Üretiminde Toki’nin Ve Belediyelerin Rolü ‘’. Gazi Üniversitesi Sosyal Bilimler Dergisi , 3 (7) , 31-50 . Retrieved from https://dergipark.org.tr/tr/pub/gusbd/issue/28176/299267 Kaplan, S. (1995). The restorative benefits of nature: Toward an integrative framework. Journal of Environmental Psychology, 15(3), 169-182.