Araştırma Makalesi

Investigation of Engineering Properties of Self-Compacting Concretes Produced with Different Mineral Additives

Cilt: 10 Sayı: 4 30 Aralık 2022
PDF İndir
EN

Investigation of Engineering Properties of Self-Compacting Concretes Produced with Different Mineral Additives

Abstract

In this study, Self-Compacting Concrete (SSC) was produced by using Fly Ash (FA) and Marble Powder (MP), which reduces the amount of cement, causes less damage to the environment and has some superior properties compared to normal concrete. The changes in the physical and mechanical properties of the produced SSCs with increasing age were investigated. CEM I 42.5 R cement was used as a binder in the production of SSC. It was used with FA and MP cement at the rates of 10%, 20% and 30% by weight. In general, a high percentage of powder material is needed in the production of SSC. Instead of obtaining the required amount of powder material from binder material, Stone Powder (SD) was preferred as filling material and hyperplasticizer additive was preferred as chemical additive. In the design of the SSC mixture, the amounts of used materials were determined in accordance with the standard. The produced SSCs were cured in the standard curing pool until the day of the experiment. 7, 28, 56 and 90 days compressive and splitting tensile strengths were determined as mechanical strength. As for the physical properties, water absorption, porosity, unit weight, capillary water absorption, ultrasound pulse velocity and electrical resistivity values at 28, 56 and 90 days were determined as a result of the experiments. Moreover, it was observed that the mechanical strengths increased with the increase of concrete age, while the ideal ratio was determined as 20% for both mineral admixtures.

Keywords

Kaynakça

  1. [1] Okamura, H. “Self-compacting high-performance concrete,” Concrete international, vol. 19 no. 7, pp. 50-54, 1997.
  2. [2] Cengiz, S. , Kamanlı, M. & Ünal, A. Investıgatıon of flexural behavıor of reınforced concrete beams produced wıth self compactıng and normal concrete. Mühendislik Bilimleri ve Tasarım Dergisi, 8 (2), 429-438 (2020).
  3. [3] Kefelegn, A., Gebre, A. Performance of self-compacting concrete used in congested reinforcement structural element, Eng. Struct. 214 (2020), 110665, https://doi. org/10.1016/j.engstruct.2020.110665.
  4. [4] Liu, Y., Hou, S., Li, C., Zhou, H., Jin, F., Qin, P., Yang, Q. Study on support time in double-shield TBM tunnel based on self-compacting concrete backfilling material. Tunn. Undergr. Sp. Technol. 96 (2020), 103212, https://doi.org/10.1016/j.tust.2019.103212.
  5. [5] Zhu, P., Xu, X., Liu, H., Liu, S., Chen, C., Jia, Z. Tunnel fire resistance of selfcompacting concrete coated with SiO2 aerogel cement paste under 2.5 h HC fire loading. Constr. Build. Mater. 239 (2020) 117857. 10.1016/j. conbuildmat.2019.117857.
  6. [6] Salesa, A., J.A. ´ P´erez-Benedicto, L.M. Esteban, R. Vicente-Vas, M. Orna-Carmona, Physico-mechanical properties of multi-recycled self-compacting concrete prepared with precast concrete rejects, Constr. Build. Mater. 153 (2017) 364–373. https://doi.org/10.1016/j.conbuildmat.2017.07.087.
  7. [7] Zamri, N.F., Mohamed, R.N., Elliott, K.S. Shear capacity of precast half-joint beams with steel fibre reinforced self-compacting concrete. Constr. Build. Mater. 272 (2021) 121813. https://doi.org/10.1016/j.conbuildmat.2020.121813.
  8. [8] Krishna Murthy. N, Narasimha Rao A.V, Ramana Reddy I. V and Vijaya Sekhar Reddy. M. Mix Design Procedure for Self-Compacting Concrete. IOSR Journal of Engineering (IOSRJEN), 2 (9) September (2012).

Ayrıntılar

Birincil Dil

İngilizce

Konular

Mühendislik

Bölüm

Araştırma Makalesi

Yayımlanma Tarihi

30 Aralık 2022

Gönderilme Tarihi

23 Eylül 2022

Kabul Tarihi

14 Ekim 2022

Yayımlandığı Sayı

Yıl 2022 Cilt: 10 Sayı: 4

Kaynak Göster

APA
Çınar Resuloğulları, E., & Dündar, B. (2022). Investigation of Engineering Properties of Self-Compacting Concretes Produced with Different Mineral Additives. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 10(4), 699-710. https://doi.org/10.29109/gujsc.1179165

                                     16168      16167     16166     21432        logo.png   


    e-ISSN:2147-9526