Araştırma Makalesi

Gimbal Axes Control with PID Controllers

Cilt: 11 Sayı: 1 25 Mart 2023
PDF İndir
EN

Gimbal Axes Control with PID Controllers

Öz

Gimbal is a system in missiles that allows the seeker to lock onto the target and follow it and increases the angle of view with its mobility in two axes. In this study, the control of the axes of a two-axis gimbal system used in the missile was carried out. PID controller tuned with Particle Swarm Optimization (PSO) is used in the control algorithm. In the optimization, a smoother controller is aimed by using the multi-objective objective function, which also includes the controller output with the position error. At the same time, the bandwidth of the system is also included as a constraint. The Butterworth Polynomial Method (BPM), which can adjust the coefficient according to the bandwidth criterion, was used for comparison purposes. As a result of the experimental studies show that the PID tuned with PSO can control the system with a lower positional error by responding faster to external factors than the PID designed with BPM.

Anahtar Kelimeler

Destekleyen Kurum

Roketsan A. Ş.

Teşekkür

Roketsan A. Ş.

Kaynakça

  1. [1] Senthil Kumar, S., & Anitha, G. (2021). A novel self-tuning fuzzy logic-based PID controllers for two-axis gimbal stabilization in a missile seeker. International Journal of Aerospace Engineering, 2021, 1-12.
  2. [2] Altan, A., & Hacıoğlu, R. (2020). Model predictive control of three-axis gimbal system mounted on UAV for real-time target tracking under external disturbances. Mechanical Systems and Signal Processing, 138, 106548.
  3. [3] Naderolasli, A., & Tabatabaei, M. (2020). Two-axis gimbal system stabilization using adaptive feedback linearization. Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering), 13(3), 355-368.
  4. [4] Battistel, A., Oliveira, T. R., & Rodrigues, V. H. P. (2019). Adaptive control of an unbalanced two-axis gimbal for application to inertially stabilized platforms. IEEE 19th International Conference on Advanced Robotics (ICAR), 99-104.
  5. [5] Khayatian, M., & Arefi, M. M. (2016). Adaptive dynamic surface control of a two‐axis gimbal system. IET Science, Measurement & Technology, 10(6), 607-613.
  6. [6] Lee, D. H., Tran, D. Q., Kim, Y. B., & Chakir, S. (2020). A robust double active control system design for disturbance suppression of a two-axis gimbal system. Electronics, 9(10), 1638.
  7. [7] Tong, W., Xiang, B., & Wong, W. (2020). Gimbal torque and coupling torque of six degrees of freedom magnetically suspended yaw gimbal. International Journal of Mechanical Sciences, 168, 105312.
  8. [8] Baskin, M., & Leblebicioğlu, M. K. (2017). Robust control for line-of-sight stabilization of a two-axis gimbal system. Turkish Journal of Electrical Engineering and Computer Sciences, 25(5): 3839-3853.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Mühendislik

Bölüm

Araştırma Makalesi

Yayımlanma Tarihi

25 Mart 2023

Gönderilme Tarihi

27 Ocak 2023

Kabul Tarihi

12 Şubat 2023

Yayımlandığı Sayı

Yıl 2023 Cilt: 11 Sayı: 1

Kaynak Göster

APA
Şahin, M. (2023). Gimbal Axes Control with PID Controllers. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, 11(1), 143-152. https://doi.org/10.29109/gujsc.1243119
AMA
1.Şahin M. Gimbal Axes Control with PID Controllers. GUJS Part C. 2023;11(1):143-152. doi:10.29109/gujsc.1243119
Chicago
Şahin, Murat. 2023. “Gimbal Axes Control with PID Controllers”. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 11 (1): 143-52. https://doi.org/10.29109/gujsc.1243119.
EndNote
Şahin M (01 Mart 2023) Gimbal Axes Control with PID Controllers. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 11 1 143–152.
IEEE
[1]M. Şahin, “Gimbal Axes Control with PID Controllers”, GUJS Part C, c. 11, sy 1, ss. 143–152, Mar. 2023, doi: 10.29109/gujsc.1243119.
ISNAD
Şahin, Murat. “Gimbal Axes Control with PID Controllers”. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji 11/1 (01 Mart 2023): 143-152. https://doi.org/10.29109/gujsc.1243119.
JAMA
1.Şahin M. Gimbal Axes Control with PID Controllers. GUJS Part C. 2023;11:143–152.
MLA
Şahin, Murat. “Gimbal Axes Control with PID Controllers”. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji, c. 11, sy 1, Mart 2023, ss. 143-52, doi:10.29109/gujsc.1243119.
Vancouver
1.Murat Şahin. Gimbal Axes Control with PID Controllers. GUJS Part C. 01 Mart 2023;11(1):143-52. doi:10.29109/gujsc.1243119

Cited By

                                     16168      16167     16166     21432        logo.png   


    e-ISSN:2147-9526