Evaluating the Trade-Off Between Energy Efficiency and Energy Saving in Spray Drying Operations

Öz

In this study, modelling simulations were employed to analyze the effects of inlet drying air flow rate and temperature, product feed rate, and heat recovery ratio in a spray dryer. The energy efficiency, energy savings, and final product outlet temperature were investigated. As the heat recovery ratio (by-pass ratio) increased, total energy savings improved, though energy efficiency declined at a slower rate compared to energy savings. The modelling study, conducted with five different by-pass ratios (100%, 70%, 50%, 30%, and 0%), indicated that the optimal by-pass ratio was 30%. At this ratio, energy efficiency decreased by 5%, while energy savings increased by approximately 16%. Additionally, at higher by-pass ratios, the product outlet temperature rose significantly. To maintain product quality, it was found that the maximum acceptable temperature of 60°C could be achieved at by-pass ratios of 40% or lower.

Anahtar Kelimeler

• Spray dryer
• energy efficiency
• energy saving
• milk powder;

Kaynakça

1. [1] M.J. Atkins, M.R.W. Walmsley, J.R. Neale, Integrating heat recovery from milk powder spray dryer exhausts in the dairy industry, Appl Therm Eng 31 (2011) 2101–2106. https://doi.org/10.1016/j.applthermaleng.2011.03.006.
2. [2] W. Julklang, B. Golman, Effect of process parameters on energy performance of spray drying with exhaust air heat recovery for production of high value particles, Appl Energy 151 (2015) 285–295. https://doi.org/10.1016/j.apenergy.2015.04.069.
3. [3] S.N. Moejes, Q. Visser, J.H. Bitter, A.J.B. van Boxtel, Closed-loop spray drying solutions for energy efficient powder production, Innovative Food Science and Emerging Technologies 47 (2018) 24–37. https://doi.org/10.1016/j.ifset.2018.01.005.
4. [4] B. Golman, W. Julklang, Simulation of exhaust gas heat recovery from a spray dryer, Appl Therm Eng 73 (2014) 899–913. https://doi.org/10.1016/j.applthermaleng.2014.08.045.
5. [5] B. Golman, W. Julklang, Analysis of heat recovery from a spray dryer by recirculation of exhaust air, Energy Convers Manag 88 (2014) 641–649. https://doi.org/10.1016/j.enconman.2014.09.012.
6. [6] S.K. Patel, M.H. Bade, Parametric analysis of industrial spray dryer for performance enhancement applicable in effluent management, Drying Technology 40 (2022) 2880–2903. https://doi.org/10.1080/07373937.2021.1975291.
7. [7] K.S. Oliveira, N. Bojorge, S.P. Freitas, Lipid microencapsulation process using spray drying: modeling and heat recovery study, Brazilian Journal of Chemical Engineering 38 (2021) 641–652. https://doi.org/10.1007/s43153-021-00182-7.
8. [8] S.K. Patel, M.H. Bade, Energy targeting and process integration of spray dryer with heat recovery systems, Energy Convers Manag 221 (2020). https://doi.org/10.1016/j.enconman.2020.113148.

9. [9] M. Camci, Thermodynamic analysis of a novel integration of a spray dryer and solar collectors: A case study of a milk powder drying system, Drying Technology 38 (2020) 350–360. https://doi.org/10.1080/07373937.2019.1570935.
10. [10] S.K. Patel, M.H. Bade, Energy analysis and heat recovery opportunities in spray dryers applied for effluent management, Energy Convers Manag 186 (2019) 597–609. https://doi.org/10.1016/j.enconman.2019.02.065.
11. [11] T.G. Walmsley, M.R.W. Walmsley, M.J. Atkins, J.R. Neale, A.H. Tarighaleslami, Thermo-economic optimisation of industrial milk spray dryer exhaust to inlet air heat recovery, Energy 90 (2015) 95–104. https://doi.org/10.1016/j.energy.2015.03.102.
12. [12] Q. Chen, D.J. Cleland, J.K. Carson, T.G. Walmsley, Integration of desiccant wheels and high-temperature heat pumps with milk spray dryers, Appl Therm Eng 216 (2022). https://doi.org/10.1016/j.applthermaleng.2022.119083.
13. [13] S.N. Moejes, A.J.B. van Boxtel, Energy saving potential of emerging technologies in milk powder production, Trends Food Sci Technol 60 (2017) 31–42. https://doi.org/10.1016/j.tifs.2016.10.023.
14. [14] A.S. Mujumdar, Handbook of Industrial Drying 3rd edition, 2007.