Binalarda Güneş Kontrol Yöntemlerinin Optimizasyon Temelli Performans Değerlendirilmesi

Öz

Bu çalışmada, binalarda farklı güneş kontrol yöntemlerinin karşıtlaştırmalı analizini, bir genetik optimizasyon algoritması ile destekleyen bir tasarım aracı ve yöntem, önerilmektedir. Çalışmada ilk olarak farklı cam alternatifleri ve sıklıkla kullanılan bazı standart gölgeleme yöntemlerinin oluşturduğu sekiz senaryo geliştirilmiştir. Ardından bu senaryolar, örnek bir bina tasarımı üstünde uygulanarak genetik optimizasyon algoritması uygulanmıştır. Algoritma, pencere büyüklüklerini ve gölgelik boyut parametrelerini değişken olarak alarak, enerji tüketimini ve günışığı aydınlatmasını optimize etmektedir. Bu algoritma kullanılarak, her senaryo için binanın Pareto çözümleri hesaplanmıştır. Bu Pareto çözümler kullanılarak, farklı güneş kontrol senaryolarının birbirleriyle olan karşılaştırmalı analizi yapılmıştır. Çalışmada elde edilen sonuçlara göre optimal güneş kontrol yöntemleri ile, bir binanın günışığı aydınlatma performansını azaltmadan %25’e kadar enerji tasarrufu sağlanabilmekte, pencere büyüklükleri ise 123% oranında arttırılabilmektedir. Daha genel bir açıdan bakıldığında ise, önerilen optimizasyon temelli analiz yöntemi, tasarım süreçlerinde farklı güneş kontrol alternatiflerinin sayısal karşılaştırmalı değerlendirilmesini destekleyebilmektedir.

Anahtar Kelimeler

• Bina güneş kontrolü,Bina enerji tüketimi,Bina günışığı aydınlatması,Çok-objektifli genetik optimizasyon,Pareto-temelli tasarım analizi

The Performance Evaluation of Solar Control Methods in Buildings: A Multi-Objective Approach

Abstract

In this study, a tool and method that support the analysis of different solar control methods in buildings through a genetic optimization algorithm are proposed. First, eight scenarios of different glazing alternatives and standard shading methods were developed. These scenarios were implemented on a sample building design and the genetic optimization algorithm was run. The algorithm optimizes energy consumption and daylight illumination using an existing energy simulation tool, taking window sizes and shading parameters as variables. Using this algorithm, the building's Pareto solutions are calculated for each scenario. Using these Pareto solutions, a comparative analysis of the different solar control scenarios was made. According to the results obtained in the study, it is possible to achieve energy savings up to 25% and to increase the window size by 123% with optimal solar control methods, without decreasing the daylighting performance of a building. The proposed optimization-based analysis method can support numerical comparative evaluation of different solar control alternatives in the design process.

Keywords

• Building solar control,Building energy use,Building daylighting,Multi-objective genetic optimization,Pareto-based design analysis

Kaynakça

1. [1] Tuhus-Dubrow, D. and M. Krarti, Genetic-algorithm based approach to optimize building envelope design for residential buildings. Building and environment, 2010. 45(7): p. 1574-1581.
2. [2] Granadeiro, V., et al., Building envelope shape design in early stages of the design process: Integrating architectural design systems and energy simulation. Automation in construction, 2013. 32: p. 196-209.
3. [3] Lin, S.-H.E. and D.J. Gerber, Designing-in performance: A framework for evolutionary energy performance feedback in early stage design. Automation in Construction, 2014. 38: p. 59-73.
4. [4] Caldas, L., Generation of energy-efficient architecture solutions applying GENE_ARCH: An evolution-based generative design system. Advanced Engineering Informatics, 2008. 22(1): p. 59-70.
5. [5] Kämpf, J.H. and D. Robinson, Optimisation of building form for solar energy utilisation using constrained evolutionary algorithms. Energy and Buildings, 2010. 42(6): p. 807-814.
6. [6] Echenagucia, T.M., et al., The early design stage of a building envelope: Multi-objective search through heating, cooling and lighting energy performance analysis. Applied Energy, 2015. 154: p. 577-591.
7. [7] Lin, Y.-H., et al., Design optimization of office building envelope configurations for energy conservation. Applied Energy, 2016. 171: p. 336-346.
8. [8] Huang, Y., J.-l. Niu, and T.-m. Chung, Comprehensive analysis on thermal and daylighting performance of glazing and shading designs on office building envelope in cooling-dominant climates. Applied energy, 2014. 134: p. 215-228.

9. [9] Manzan, M., Genetic optimization of external fixed shading devices. Energy and Buildings, 2014. 72: p. 431-440.
10. [10] Khoroshiltseva, M., D. Slanzi, and I. Poli, A Pareto-based multi-objective optimization algorithm to design energy-efficient shading devices. Applied Energy, 2016. 184: p. 1400-1410.
11. [11] Lau, A.K.K., et al., Potential of shading devices and glazing configurations on cooling energy savings for high-rise office buildings in hot-humid climates: The case of Malaysia. International Journal of Sustainable Built Environment, 2016. 5(2): p. 387-399.
12. [12] Schaffer, J.D. Multiple objective optimization with vector evaluated genetic algorithms. in Proceedings of the 1st international Conference on Genetic Algorithms. 1985. L. Erlbaum Associates Inc.
13. [13] Horn, J., N. Nafpliotis, and D.E. Goldberg. A niched Pareto genetic algorithm for multiobjective optimization. in Evolutionary Computation, 1994. IEEE World Congress on Computational Intelligence., Proceedings of the First IEEE Conference on. 1994. Ieee.
14. [14] Corne, D.W., J.D. Knowles, and M.J. Oates. The Pareto envelope-based selection algorithm for multiobjective optimization. in International Conference on Parallel Problem Solving from Nature. 2000. Springer.
15. [15] Srinivas, N. and K. Deb, Muiltiobjective optimization using nondominated sorting in genetic algorithms. Evolutionary computation, 1994. 2(3): p. 221-248.
16. [16] Zitzler, E. and L. Thiele, Multiobjective evolutionary algorithms: a comparative case study and the strength Pareto approach. IEEE transactions on Evolutionary Computation, 1999. 3(4): p. 257-271.
17. [17] Ziztler, E., M. Laumanns, and L. Thiele, Spea2: Improving the strength pareto evolutionary algorithm for multiobjective optimization. Evolutionary Methods for Design, Optimization, and Control, 2002: p. 95-100.
18. [18] Deb, K., et al. A fast elitist non-dominated sorting genetic algorithm for multi-objective optimization: NSGA-II. in International Conference on Parallel Problem Solving From Nature. 2000. Springer.
19. [19] Weaver, E., et al., Rapid Application Development with OpenStudio. 2012 ACEEE Summer Study, 2012.
20. [20] Bellia, L., et al., An overview on solar shading systems for buildings. Energy Procedia, 2014. 62: p. 309-317.
21. [21] Sonnenenergie, D.G.F., Planning and installing photovoltaic systems: a guide for installers, architects and engineers. 2007: Earthscan.
22. [22] Dino, I.G., An evolutionary approach for 3D architectural space layout design exploration. Automation in Construction, 2016. 69: p. 131-150.