Mekanik Alaşımlama Metodu ile Üretilen Al-4.5Cu/SiC Kompozitin Termal ve Mikroyapısal Özelliklerinin İncelenmesi
Öz
Anahtar Kelimeler
Destekleyen Kurum
Proje Numarası
Teşekkür
Kaynakça
- [1] Ahmad Z., Khan S. A review paper on tribological and mechanical properties of Aluminium metal matrix composites manufactured by different route. International Jjournal of Current Engineering and Scientific Research, 1:4(1-8), (2014). [2] Arakawa S., Hatayama T., Matsugi K., and Yanagisawa O.Effect of heterogeneous precipitation on age-hardening of Al2O3 particle dispersion Al-4mass%Cu composite produced by mechanical alloying. Scripta Materialia, 42(755–760), (2000). [3] Durai T. G., Karabi Das and Siddhartha D. Al (Zn)–4Cu/Al2O3 in-situ metal matrix composite synthesized by displacement reactions. Journal of Alloys and Compounds, 457(435-439), (2008). [4] Murthy V. S. R., and Rao B. S. Microstructural development in the directed melt-oxidized (DIMOX) Al-Mg-Si alloys. Journal of Materials Science, 30(3091-3097), (1995). [5] Breslin M. C., Ringnalda J., Xu L., Fuller M., Seeger J., Daehn G. S., Otani T. and Fraser H. L. Processing, microstructure, and properties of co-continuous alumina-aluminum composites. Materials Science and Engineering A, 195(113–119), (1995). [6] Liu W. and Köster U. Decomposition of the icosahedral phase in AlCuFe alloys. Materials Science and Engineering A, 133(C)(388-392), (1991). [7] Abd El-Azim A. N., Kassem M. A., El-Baradie Z. M. and Waly M. Structure and properties of short alumina fibre reinforced AlSi18CuNi produced by stir casting. Materials Letters, 56(963-969), (2002). [8] Badini C., Fino P., Musso M. and Dinardo P. Thermal fatigue behaviour of a 2014/Al2O3-SiO2 (Saffil® fibers) composite processed by squeeze casting. Materials Chemistry and Physics, 64(247-255), (2000). [9] Wei-chen Zhai, Zhao-hui Zhang, Fu-chi Wang, Xiang-bo Shen, Shukui Lee, and Lu Wang. Effect of SI content on microstructure and properties of Si/Al composites. Transactions of Nonferrous Metals Society of China, 24(982-988), (2014). [10] Ribes H., Suery M., Esperance G. L., and Legoux J.G. Microscopic examination of the interface region in 6061-Al/SiC composites reinforced with asreceived and oxidized SiC particles. Metallurgical and Materials Transactions A, 21(2489–2496), (1999). [11] Kumar G., Rao C., Selvaraj N., Mechanical and Tribological Behavior of Particulate Reinforced Aluminum Metal Matrix Composites – a review. Journal of Minerals & Materials Characterization & Engineering, 10(1) (59–91), (2011). [12] Baisane V. P., Sable Y.S., Dhobe M. M., Sonawane P.M. Recent development and challenges in processing of ceramics reinforced Al matrix composite through stir casting process: A Review. International Journal of Engineering and Applied Sciences, 2(10)(11-16), (2015). [13] Sur G., Şahin Y., Gökkaya H., Production of aluminum based particulate reinforced composites using molten metal mixing and squeeze casting methods. J. Fac. Eng. Arch. Gazi Univ. 20 (2) (233-238), (2005). [14] Kim S. W., Lee U. J., Han S. W., Kim D. K., K. Ogi, Heat treatment and wear characteristics of Al/SiCp composites fabricated by duplex process. Composites: Part B 34 (2003) 737–745. [15] Carvalho O., Madeira S., Buciumeanu M., Soares D., Silva F.S., Miranda G. Pressure and sintering temperature influence on the interface reaction of SiCp /410L stainless steel composites. Journal of Composite Materials, 50(15)(2005-2015), (2016) [16] Saravanan C., Subramanian K., Ananda V., Sankara R. Effect of Particulate Reinforced Aluminium Metal Matrix Composite – A Review. Mechanics and Mechanical Engineering, 19(1)(23-30), (2015). [17] Venkatesh B., Harish B. Mechanical properties of metal matrix composites (Al/SiCp ) particles produced by powder metallurgy. International Journal of Engineering Research and General Science, 3(1)(1277-1284), (2015). [18] Leszczyńska-Madej B. The effect of sintering temperature on microstructure and properties of Al – SiC composites. Archives of Metallurgy and Materials, 58(1)(43–48), (2013). [19] Suryanarayanan K., Praveen R., Raghuraman S. Silicon Carbide Reinforced Aluminium Metal Matrix Composites for Aerospace Applications: A Literature Review. International Journal of Innovative Research in Science, Engineering and Technology, 2(11)(6336–6344), (2013). [20] Yodkaew T., Morakotjinda M., Tosangthum N., Coovattanachai O., Krataitong R., Siriphol P., Vetayanugul B., Chakthin S., Poolthong N., Tongsri R. Sintered Fe-Al2 O3 and Fe-SiC Composites. Journal of Metals, Materials and Minerals, 18(1)(57–61), (2008). [21] Abhik R., Xaviora M. Evaluation of Properties for Al-SiC Reinforced Metal Matrix Composite for Brake Pads. Procedia Engineering, 97(941–950), ( 2014). [22] Zakaria H.M. Microstructural and corrosion behavior of Al/SiC metal matrix composites. Ain Shams Engineering Journal, 5(3)(831–838), (2014). [23] Akhtar F. Ceramic reinforced high modulus steel composites: processing, microstructure and properties., Canadian Metallurgical Quarterly, 53(3)(253–263), (2014). [24] Singla M., Dwivedi D., Singh L., Chawla V. Development of Aluminium Based Silicon Carbide Particulate Metal Matrix Composite. Journal of Minerals & Materials Characterization & Engineering, 8(6)(455–467), (2009). [25] Nuruzzaman D., Kamaruzaman F. Processing and mechanical properties of aluminiumsilicon carbide metal matrix composites. Materials Science and Engineering, 114(11-17), (2016). [26] Çelik Y.H., Kilickap E. Hardness and Wear Behaviours of Al Matrix Composites and Hybrid Composites Reinforced with B4C and SiC. Powder Metallurgy and Metal Ceramics, 57 (9-10) (613-622), (2019). [27] Ozben T., Kilickap E., Cakir O. Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC. Journal of Materials Processing Technology, 198(220-225), (2008). [28] Kilickap E., Cakir O., Aksoy M., Inan A. Study of tool wear and surface roughness in machining of homogenised SiC-p reinforced aluminium metal matrix composite. Journal of Materials Processing Technology, 164-165(862-867), (2005). [29] Song G.M., Zhou Y. and Wang Y. J. Effect of carbide articles on the ablation properties of tungsten composites. Materials Characterization, 50(293-303), (2003). [30] Tang H. G., Ma X. F., Zhao W., Yan J. M. and Zhu C. J. Crystallization of mechanically alloyed amorphous W-Mg alloy under high pressure. Solid State Communications, 129(147-150), (2004). [31] Suryanarayana C. Mechanical alloying and milling. Progress in Materials Science, 46(1-184), (2001). [32] Nakazato R.Z, Codaro E.N., Horovistiz A.L and Hein L.R.O. A metallurgical study of aluminum alloys used as aircraft components. Praktische Metallographie-Practical Metallography, 38 (2)(74-87), (2001). [33] Okumuş M., Mekanik alaşımlama yöntemi ile üretilen nanoyapılı Al66Co20Cu14 tozlarının termal ve mikroyapısal özellikleri. BEÜ Fen Bilimleri Dergisi, 9 (1) (366-375), (2020). [34] Mandal A., Maiti R., Chakraborty M., Murty B.S. Effect of TiB2 particles on aging response of Al–4Cu alloy. Materials Science and Engineering A, 386(296–300), (2004). [35] Avar B. , Şimşek T., Göğebakan M. Mekanik Alaşımlama ile Üretilen Nanokristal Fe60Al30Cu10 (at.%) Tozların Yapısal ve Mekanik Özellikleri. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , 7 (1) (184-191), (2019). [36] Reiso O., Øverlie H.G., Ryum N. Dissolution and melting of secondary Al2Cu phase particles in an AlCu alloy. Metallurgical Transactions A, 21(6)(1689–1695), (1990). [37] Luangvaranunt T., Dhadsanadhep C., Umeda J., Nisaratanaporn E., Kondoh K. Aluminum-4 mass%Copper/Alumina Composites Produced from Aluminum Copper and Rice Husk Ash Silica Powders by Powder Forging. Materials Transactions, 51(4)(756-761), (2010). [38] Türker M., Özdemir A. T., Ögel B. ve Yavuz A. (Alüminyum-SiC Tozlarının Mekanik Alaşımlama Değirmeninde Öğütme Zamanının Kompozit Toz Yapısına Etkisinin Araştırılması. Uluslararası Katılımlı 2. Ulusal Toz Metalürjisi Konferansı, Ankara, (425-431), (1999). [39] Chandrasekhar G. L., Vijayakumar Y., Nagaral M. Investigations on Mechanical Properties of Al-4.5% Cu-SiC and Al-4.5%Cu-Graphite Composites. European Journal of Engineering Research and Science, 1(1)(30-33), (2016). [40] Debnath S., Swami V., Rai R. N. Microstructures and Mechanical Properties Studies of the Directional Solidified Developed Ex-Situ Al-4.5% Cu-SiCp Metal-Matrix Composites. Journal of Engineering and Applied Sciences, 13(3)(3273-3277), (2018). [41] Wąsik A., Madej B. L., Madej M. The influence of SiC particle size on mechanical properties of aluminium matrix composites. Metallurgy and Foundry Engineering 43(1)(41–49), (2017). [42] Qiu F., Gao X., Tang J., Gao Y.-Y., Shu S.-L., Han X., Li Q., Jiang Q.-C. Microstructures and Tensile Properties of Al–Cu Matrix Composites Reinforced with Nano-Sized SiCp Fabricated by Semisolid Stirring Process., Metals, 7(2): 49, (2017) [43] Penchal Reddy M., Shakoor R.A., Gururaj Parande, Vyasaraj Manakari, Ubaid F., Mohamed A.M.A., Manoj Gupta. Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques. Progress in Natural Science: Materials International, 27(5)(606-614), (2017). [44] Izadi H., Nolting A., Munro C., Bishop D.P., Plucknett K.P., Gerlich A.P. Friction stir processing of Al/SiC composites fabricated by powder metallurgy. Journal of Materials Processing Technology, 213(11)(1900-1907), (2013). [45] Anggara B.S., Handoko E., Soegijono B. Mechanical Properties of Al-Cu Alloy-SiC Composites. AIP Conference Proceedings, 1617(109-111) (2014). [46] Arık H. Al-Si3N4 Toz Metal Kompozit Malzeme Üretimi ve Aşınma Davranışının Araştırılması. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , 7 (4)(776-787), (2019).
Ayrıntılar
Birincil Dil
Türkçe
Konular
Metroloji,Uygulamalı ve Endüstriyel Fizik , Mühendislik
Bölüm
Araştırma Makalesi
Yazarlar
Mustafa Okumuş
*
0000-0003-0369-7686
Türkiye
Berna Bülbül
Bu kişi benim
0000-0002-1384-3547
Türkiye
Yayımlanma Tarihi
28 Haziran 2020
Gönderilme Tarihi
15 Mart 2020
Kabul Tarihi
8 Mayıs 2020
Yayımlandığı Sayı
Yıl 2020 Cilt: 8 Sayı: 2
