Evaluating the Trade-Off Between Energy Efficiency and Energy Saving in Spray Drying Operations

Yıl 2025, Erken Görünüm, 1 - 1

Gülşah Karaca Dolgun

https://doi.org/10.29109/gujsc.1562960

Öz

In this study, modelling simulations were employed to analyze the effects of inlet drying air flow rate and temperature, product feed rate, and heat recovery ratio in a spray dryer. The energy efficiency, energy savings, and final product outlet temperature were investigated. As the heat recovery ratio (by-pass ratio) increased, total energy savings improved, though energy efficiency declined at a slower rate compared to energy savings. The modelling study, conducted with five different by-pass ratios (100%, 70%, 50%, 30%, and 0%), indicated that the optimal by-pass ratio was 30%. At this ratio, energy efficiency decreased by 5%, while energy savings increased by approximately 16%. Additionally, at higher by-pass ratios, the product outlet temperature rose significantly. To maintain product quality, it was found that the maximum acceptable temperature of 60°C could be achieved at by-pass ratios of 40% or lower.

Anahtar Kelimeler

Spray dryer, energy efficiency, energy saving, milk powder;

Kaynakça

• [1] M.J. Atkins, M.R.W. Walmsley, J.R. Neale, Integrating heat recovery from milk powder spray dryer exhausts in the dairy industry, Appl Therm Eng 31 (2011) 2101–2106. https://doi.org/10.1016/j.applthermaleng.2011.03.006.
• [2] W. Julklang, B. Golman, Effect of process parameters on energy performance of spray drying with exhaust air heat recovery for production of high value particles, Appl Energy 151 (2015) 285–295. https://doi.org/10.1016/j.apenergy.2015.04.069.
• [3] S.N. Moejes, Q. Visser, J.H. Bitter, A.J.B. van Boxtel, Closed-loop spray drying solutions for energy efficient powder production, Innovative Food Science and Emerging Technologies 47 (2018) 24–37. https://doi.org/10.1016/j.ifset.2018.01.005.
• [4] B. Golman, W. Julklang, Simulation of exhaust gas heat recovery from a spray dryer, Appl Therm Eng 73 (2014) 899–913. https://doi.org/10.1016/j.applthermaleng.2014.08.045.
• [5] B. Golman, W. Julklang, Analysis of heat recovery from a spray dryer by recirculation of exhaust air, Energy Convers Manag 88 (2014) 641–649. https://doi.org/10.1016/j.enconman.2014.09.012.
• [6] S.K. Patel, M.H. Bade, Parametric analysis of industrial spray dryer for performance enhancement applicable in effluent management, Drying Technology 40 (2022) 2880–2903. https://doi.org/10.1080/07373937.2021.1975291.
• [7] K.S. Oliveira, N. Bojorge, S.P. Freitas, Lipid microencapsulation process using spray drying: modeling and heat recovery study, Brazilian Journal of Chemical Engineering 38 (2021) 641–652. https://doi.org/10.1007/s43153-021-00182-7.
• [8] S.K. Patel, M.H. Bade, Energy targeting and process integration of spray dryer with heat recovery systems, Energy Convers Manag 221 (2020). https://doi.org/10.1016/j.enconman.2020.113148.
• [9] M. Camci, Thermodynamic analysis of a novel integration of a spray dryer and solar collectors: A case study of a milk powder drying system, Drying Technology 38 (2020) 350–360. https://doi.org/10.1080/07373937.2019.1570935.
• [10] S.K. Patel, M.H. Bade, Energy analysis and heat recovery opportunities in spray dryers applied for effluent management, Energy Convers Manag 186 (2019) 597–609. https://doi.org/10.1016/j.enconman.2019.02.065.
• [11] T.G. Walmsley, M.R.W. Walmsley, M.J. Atkins, J.R. Neale, A.H. Tarighaleslami, Thermo-economic optimisation of industrial milk spray dryer exhaust to inlet air heat recovery, Energy 90 (2015) 95–104. https://doi.org/10.1016/j.energy.2015.03.102.
• [12] Q. Chen, D.J. Cleland, J.K. Carson, T.G. Walmsley, Integration of desiccant wheels and high-temperature heat pumps with milk spray dryers, Appl Therm Eng 216 (2022). https://doi.org/10.1016/j.applthermaleng.2022.119083.
• [13] S.N. Moejes, A.J.B. van Boxtel, Energy saving potential of emerging technologies in milk powder production, Trends Food Sci Technol 60 (2017) 31–42. https://doi.org/10.1016/j.tifs.2016.10.023.
• [14] A.S. Mujumdar, Handbook of Industrial Drying 3rd edition, 2007.