The Effect of Aluminium Injection Parameters on the Mechanical Properties of the Material Produced by High Pressure Die-Casting

Yıl 2023, Cilt: 11 Sayı: 2, 421 - 430, 23.06.2023

Emre Akkaya Yunus Kayır

https://doi.org/10.29109/gujsc.1211920

Öz

Aluminium is one of the basic materials used in many sectors, especially in automotive, defence and aviation. Generally, aluminium parts are manufactured by using injection molding methods in many sectors, such as automotive, etc. Injection presses that are used for die-casting material have a lot of parameters, affect the molded parts’ properties. In this study, the effect of injection parameters on the mechanical properties was investigated. Firstly, a test part that is shaped currently on the injection press machine in a sector was found out. An aluminum alloy, named Al〖Si〗_12 Cu (EN AC 47000), that is used widely in die-casting techniques was preferred. Three injection parameters, such as, injection velocity (m/s), time of the mold opening (s) and molten metal temperature (0C), were selected. And all works were planned with the full factorial experimental design method. Thus, the test parts were manufactured by using an injection molding machine. Moreover, many tests, such as hardness and tensile, were performed on the test parts to investigate the effect of injection parameters on the mechanical properties of the material. The tests were analysed with the full factorial and ANOVA method. As a results of the analysis, the highest hardness value was obtained as 85 HB when the molten metal temperature was 750 ℃, the injection velocity was 1.3 m/s, the mold opening time was 10 s, and the highest breaking strength was obtained as molten metal temperature 725 ℃, injection velocity 4 m/s, when the mold opening time was 12 s was found to be 264 MPa.

Anahtar Kelimeler

Aluminium, high pressure die casting, factorial design, mechanical properties, design of experiment, analysis of variance

Kaynakça

• [1] Ç. Çağan, M. Uğurlu and B. Buldum, Aluminum and Its Alloys Applications in Military Vehicles., in II. International Defense Industry Symposium, Kırıkkale, 2017.
• [2] X. Dong, . H. Yang, . X. Zhu and S. Ji, "High Strength and Ductility Aluminium Alloy Processed by High Pressure Die Casting," Journal of Alloys and Compounds, vol. 773, pp. 86-96, 2019.
• [3] O. Serçe and M. Koru, "Yüksek Basınçlı Döküm Prosesinde Enjeksiyon Parametrelerine Bağlı Olarak Döküm Simülasyon," Cumhuriyet Science Journal, vol. 36, no. 5, pp. 10-23, 2015.
• [4] V. Toptaş, "Bir Alüminyum Alaşımı ile Basınçlı Döküm Yöntemi Kullanılarak Tabanca Gövdesi Üretimi," Istanbul Technical University, Graduate School of Natural and Applied Sciences, Master Thesis, 2014.
• [5] F. Mert, A. Özdemir and Ç. Karataş, "Magnezyum Alaşımlarının Basınçlı Döküm Yöntemiyle Kalıplanabilirliğinin Değerlendirilmesi," Journal of Polytechnic, vol. 13, no. 3, pp. 165-176, 2010.
• [6] Y. B. Süslü, M. S. Acar, O. Özcan , M. Mutlu and Ö. Keleş, "Yüksek Basınçlı Alüminyum Döküm İle Üretilen Ürün Kalitesine AlTi5B1ve AlB3 Ön Alaşımının Etkisi," in TÜDÖKSAD 2nd Casting Conference, 2019.
• [7] M. A. Haque, B. K. Jena and D. K. Mohanta, "Optimization of Process Parameters In Cold Chamber Pressure Die Casting Using DOE," vol. 4, 2017.
• [8] M. Mihailescu, A. Negrea, M. Ciopec, P. Negrea, N. Duteanu, I. Grozav, P. Svera, V. Cosmin, A. Barbulescu and C. S. Dumitriu, "Full Factorial Design Gold Recovery from Industrial Solutions," Toxics, vol. 9, no. 5, 2021.
• [9] A. Spanelis and A. D. Walker, "A Multi-Objective Factorial Design Methodology for Aerodynamic Off-Takes and Ducts," Aerospace, vol. 9, no. 3, 2022.
• [10] I. A. Mohammed, M. T. Bankole, A. S. Abdulkareem, S. S. Ochigbo, A. S. Afolabi and O. K. Abubakre, "Full factorial design approach to carbon nanotubes synthesis by CVD method in argon environment," South African Journal of Chemical Engineering, vol. 24, pp. 17-42, 2017.
• [11] G. Akman and C. Özkan, "Sac İmalatında Karşılaşılan Yapışma Probleminin Deney Tasarımı İle Çözümü," Doğuş University Journal, pp. 187-199, 2011.
• [12] M. Korkmaz, C. Özmetin, E. Özmetin, E. Çalgan and Y. Süzen, "Boron Removal by Aluminum Modified Pumice and Aluminum Hydroxide from Boron Mine Wastewater-Full Factorial Experimental Design," Nevşehir Bilim ve Teknoloji Dergisi, vol. 10, no. 1, pp. 1-13, 2021.
• [13] T. Wang, J. Huang, H. Fu, K. Yu and S. Yao, "Influence of Process Parameters on Filling and Feeding Capacity during High Pressure Die-Casting Process," Applied Sciences, vol. 12, no. 9, 2022.
• [14] B.Gökçe and S. Taşgetiren, "Kalite İçin Deney Tasarımı",Makine Teknolojileri Elektronik Dergisi, vol. 6, no. 1, pp. 71-83, 2009.
• [15] D.C. Montgomery, Design and Analysis of Experiments, vol. 7th, New York: John Wiley & Sons, 2008.