Fatigue analysis of the vehicle brake disc
Öz
In this study, the fatigue analysis of the vehicle brake disc was simulated using the finite element program, and life calculations were made in accordance with the analysis. The main purpose is to simulate experimental tests, which take a long time to result, in the computer environment and to obtain results in a short time and at a very low cost. With the help of the ANSYS computer program, which operates with the finite element logic, the disk brake system was created in three dimensions, and the boundary conditions closest to reality were determined and analyzed using the finite element method. In the disc brake system selected, the data obtained by conducting stress, fatigue life, and safety coefficient analyses in line with the forces formed on the wheel and the vehicle during braking were examined. According to the analysis results, our brake disc is in different life ranges in accordance with the material used and the load applied, and when the force is increased, the life decreases and vice versa
Anahtar Kelimeler
Kaynakça
- Balaji, R., Nadarajan, M., Selokar, A., Kumar, S., and Sivakumar, S., 2019. Modelling and analysis of Disk Brake under Tribological behaviour of Al-Al2O3 Ceramic Matrix Composites/Kevlar® 119 composite/C/Sic-Carbon Matrix Composite/Cr-Ni-Mo-V steel. Materials Today: Proceedings, 18, 3415-3427.
- Bannantine, J., Comer, J., & Handrock, J. (1990). Fundamentals of Metal Fatigue Analysis. New Jersey: Prentice Hall.
- Bayrakçeken, H. and Düzgün , M., 2005. Taşıtlarda Fren Verimi ve Frenleme Mesafesi Analizi. Journal of Polytechnic, 8(2), 153-160.
- Crouse, H., 1973. Otomobil Şasisi Cilt II. MEB Mesleki ve Teknik Öğretim Kitapları Etüd ve Programlama Dairesi Yayınları, Ankara.
- Fildiş , M., Türkmen, H., Karasu, T., Yiğit, İ., & Berispek, M. (2001). Motorculuk Bölümü Şasi İş ve İşlem Yaprakları (4. b.), MEB Yayınları, İstanbul.
- Güney, B. and Mutlu, İ., 2015. Taşıtlarda AB ve ABD’nde Uygulanan Fren Test Standartlarının İncelenmesi. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, 15(015902), 7-16.
- Hancq, D., Walters, A. and Beuth, J., 2000. Development of an Object-Oriented Fatigue Tool. Engineering with Computers, 16, 131-144.
- Köylü, H. and Tural, E., 2016. Sabit fren test sistemlerinde ileri fren hatalarını belirleyebilecek bir arayüzün geliştirilmesi. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, 22(4), 267-279
- Norman, V., Skoglund, P., Leidermark, D. and Moverare, J., 2016. The effect of superimposed high-cycle fatigue on thermo-mechanical fatigue in cast iron. International Journal of Fatigue, 88, 121-131.
- Pektaş , S., 2006. Fren Mekanizmasının Yorulma Testinin FEA Metoduyla Simulasyonu. Yüksek Lisanas Tezi, Dokuz Eylül Üniversitesi Fen Bilimleri Enstitüsü. İzmir.