3D Yazıcı ile Üretilen Kafes Yapılar Üzerine Araştırma Eğilimleri: Bibliyometrik Analiz (2015–2025)

Öz

Bu çalışma, Web of Science veritabanı verileri ışığında, 3D baskı (eklemeli imalat) ile üretilen kafes yapılar üzerine yürütülen araştırmaların bibliyometrik bir analizini sunmaktadır. Araştırma kapsamında, Konu başlığında '3D printing' ve eser başlığında 'Lattice Structures' terimlerini içeren, 2015–2025 yılları arasına ait çalışmalar incelenmiştir. Yıllık yayın dağılımları üzerinden yapılan analizle, bu alandaki bilimsel çıktının zamansal eğilimleri ortaya konmuştur. Elde edilen bulgular, 2014–2015 yıllarında alanın henüz başlangıç aşamasında olduğunu; ancak 2016 itibarıyla belirgin bir ivme kazandığını göstermektedir. Özellikle 2020 sonrasında gözlenen güçlü ve sürekli büyüme dikkat çekicidir; 2021 yılından itibaren yıllık yayın sayısı 70’in üzerine çıkmış, 2023-2025 bandında ise 100’ü aşmıştır. Bu keskin artış, kafes yapıların eklemeli imalat içerisinde 'niş' bir konu olmaktan çıkarak ana akım bir araştırma sahasına dönüştüğünü kanıtlar niteliktedir. Sonuç olarak, son on yıldaki bibliyometrik veriler, hafif tasarım, enerji sönümleme ve ileri fonksiyonel uygulama potansiyelleriyle beslenen bu alana yönelik ilginin hızla arttığını doğrulamaktadır. Araştırma faaliyetlerinin henüz doygunluğa ulaşmamış olması, kafes yapıların yakın gelecekte de gelişime açık ve aktif bir çalışma alanı olarak kalacağını öngörmektedir. Bu çalışma, 2015–2025 yılları arasında eklemeli imalatla üretilen kafes yapılara ilişkin literatürde öne çıkan temel temaları, eğilimleri ve mevcut araştırma boşluklarını analiz etmeyi amaçlamaktadır.

Anahtar Kelimeler

• 3D yazıcı
• Kafes yapılar
• Deneysel yöntemler
• Nümerik yöntemler

Destekleyen Kurum

Afyon Kocatepe Üniversitesi Bilimsel Araştırma Projeleri (BAP) Koordinasyon Birimi

Proje Numarası

23.FEN.BİL.14

Etik Beyan

Bu çalışma, yayımlanmış bilimsel literatürün bibliyometrik analizine dayanmaktadır ve insan katılımcılar ya da hayvan denekler içermemektedir. Bu nedenle etik kurul onayı gerekmemektedir.

Teşekkür

Yazarlar, “23.FEN.BİL.14” numaralı ve 'Eklemeli İmalatla Üretilen Hücresel Kafes Yapıların Karbon Fiber Takviyesi ile İyileştirilmesi' başlıklı projeye sağladıkları finansal destekten ötürü Afyon Kocatepe Üniversitesi Bilimsel Araştırma Projeleri (BAP) Koordinasyon Birimi’ne teşekkürlerini sunar.

Research Trends in 3D Printed Lattice Structures: A Bibliometric Analysis (2015–2025)

Öz

This study presents a bibliometric analysis of research on lattice structures fabricated via 3D printing, utilizing data from the Web of Science database. The search criteria were restricted to records containing "3D printing" in the topic and "Lattice Structures" in the title, covering the period from 2015 to 2025. Through the analysis of annual publication distributions, the temporal trends of scientific output regarding 3D printed lattice structures were revealed. The results indicate that the field was in a nascent stage during 2014–2015 but gained significant momentum by 2016. A robust and continuous growth is particularly evident after 2020; annual publications exceeded 70 starting from 2021 and surpassed 100 in both 2023 and 2025. This sharp increase suggests that lattice structures have evolved from a "niche" topic within additive manufacturing into a mainstream research area. Overall, the bibliometric trends demonstrate a rapidly growing interest over the last decade, driven by potentials in lightweight design, energy absorption, and advanced functional applications. The analysis further implies that research activity has not yet reached saturation, suggesting that lattice structures will remain a highly active and evolving field in the near future.

Anahtar Kelimeler

• 3D printing
• Lattice structure
• Experimental methods
• Numerical methods

Destekleyen Kurum

Afyon Kocatepe University Scientific Research Projects (BAP) Coordination Unit

Proje Numarası

23.FEN.BİL.14

Etik Beyan

This study is based on bibliometric analysis of published scientific literature and does not involve human participants or animal subjects. Therefore, ethical committee approval is not required.

Teşekkür

The authors would like to thank the Afyon Kocatepe University Scientific Research Projects (BAP) Coordination Unit for the financial support provided to the project titled “23.FEN.BİL.14”, entitled “Investigation of Carbon Fiber Reinforcement of Cellular Lattice Structures Manufactured by Additive Manufacturing".

Kaynakça

1. [1] Gibson L. J. & Ashby, M. F. (1982). The mechanics of three-dimensional cellular materials. Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences, 382, 1782.
2. [2] Ashby, M. F. (2006). The properties of foams and lattices. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 364, 1838 (pp. 15–30).
3. [3] Zhang, X., Zhou, H., Shi, W., Zeng, F., Zeng, H., & Chen, G., (2018). Vibration tests of 3D printed satellite structure made of lattice sandwich panels. AIAA Journal, 56, 10 (pp. 4213–4217).
4. [4] Hao, Z., Zhang, X., Huizhong, Z., Huning, Y., Hongshuai, L., Xiao, L. I., & Yaobing, W. (2019). Lightweight structure of a phase-change thermal controller based on lattice cells manufactured by SLM. Chinese Journal of Aeronautics, 32(7), (pp. 1727-1732).
5. [5] Habib, F. N., Iovenitti, P., Masood, S. H. & Nikzad, M. (2018). Fabrication of polymeric lattice structures for optimum energy absorption using Multi Jet Fusion technology. Mater Des, vol. 155, (pp. 86–98).
6. [6] Yavuz, İ., Yuran, A. F. & Yıldırım, A. (2019). Gözenekli yapıların 3b yazıcılarla hassas üretiminin araştırılması. 4th International Congress On 3D Printing (Addıtıve Manufacturıng) Technologies And Digital Industry, Accessed: Nov. 30, 2025. [Online]. Available: https://indexive.com/uploads/papers/pap_indexive15937956042147483647.pdf
7. [7] Shuai, X., Zeng, Y., Li, P. & Chen, J. (2020). Fabrication of fine and complex lattice structure Al2O3 ceramic by digital light processing 3D printing 168 technology. 55, 16. (pp. 6771–6782).
8. [8] Nagesha, B. K., Dhinakaran, V., Shree, M. V., Kumar, K. M., Chalawadi, D., & Sathish, T. P. (2020). Review on characterization and impacts of the lattice structure in additive manufacturing. Materials Today: Proceedings, 21, 916-919.

9. [9] Tamburrino, F., Graziosi, S., & Bordegoni, M. (2018). The design process of additively manufactured mesoscale lattice structures: a review. Journal of Computing and Information Science in Engineering, 18(4), 040801.
10. [10] Elsayed, H., Rebesan, P., Giacomello, G., Pasetto, M., Gardin, C., Ferroni, L., Zavan, B. & Biasetto, L. (2019). Direct ink writing of porous titanium (Ti6Al4V) lattice structures. Materials Science and Engineering: C, 103, 109794.
11. [11] Wu, J., Wang, W., & Gao, X. (2019). Design and optimization of conforming lattice structures. IEEE transactions on visualization and computer graphics, 27(1), 43-56.
12. [12] A. Kantaros, A., & Piromalis, D. (2021). Fabricating lattice structures via 3D printing: The case of porous bio-engineered scaffolds. Applied Mechanics, 2(2), 289-302
13. [13] Xu, Y., Zhang, H., Gan, Y., & Šavija, B. (2021). Cementitious composites reinforced with 3D printed functionally graded polymeric lattice structures: Experiments and modelling. Addit. Manuf, 39(10.1016).
14. [14] Yuran, A. F., Yıldırım, A. & Yavuz, İ. (2024). Kafes yapıların üretim yöntemleri. Afyonkarahisar: YAZ Yayınları, 2024. doi: doi.org/10.5281/zenodo.12728359.
15. [15] Lozanovski, B., Leary, M., Tran, P., Shidid, D., Qian, M., Choong, P. & Brandt, M. (2019). Computational modelling of strut defects in SLM manufactured lattice structures. Materials & Design, 171, 107671.
16. [16] Alteneiji, M., Ali, M. I. H., Khan, K. A., & Al-Rub, R. K. A. (2022). Heat transfer effectiveness characteristics maps for additively manufactured TPMS compact heat exchangers. Energy Storage and Saving, 1(3), 153-161.
17. [17] Özcan, L., & Yuran, A. F. (2024). Üç boyutlu yazıcıyla üretilmiş yüzey baskılı elektrot benzeri sistemin elektrokimyasal uygulaması. International Journal of 3D Printing Technologies and Digital Industry, 8(1), 80-91.
18. [18] Amirpour, M., & Battley, M. (2022). Study of manufacturing defects on compressive deformation of 3D-printed polymeric lattices. The International Journal of Advanced Manufacturing Technology, 122(5), 2561-2576.
19. [19] Tang, C., Liu, J., Yang, Y. A. N. G., Liu, Y., Jiang, S., & Hao, W. (2020). Effect of process parameters on mechanical properties of 3D printed PLA lattice structures. Composites Part C: Open Access, 3, 100076.
20. [20] Boley, J. W., Van Rees, W. M., Lissandrello, C., Horenstein, M. N., Truby, R. L., Kotikian, A., Jennifer, A. & Mahadevan, L. (2019). Shape-shifting structured lattices via multimaterial 4D printing. Proceedings of the National Academy of Sciences, 116(42), 20856-20862.
21. [21] Qi, D., Yu, H., Liu, M., Huang, H., Xu, S., Xia, Y., Qian, G. & Wu, W. (2019). Mechanical behaviors of SLM additive manufactured octet-truss and truncated-octahedron lattice structures with uniform and taper beams. International Journal of Mechanical Sciences, 163, 105091.
22. [22] Sharma, D., & Hiremath, S. S. (2022). Bio-inspired repeatable lattice structures for energy absorption: Experimental and finite element study. Composite Structures, 283, 115102.
23. [23] Stanković, T., Mueller, J., Egan, P., & Shea, K. (2015). A generalized optimality criteria method for optimization of additively manufactured multimaterial lattice structures. Journal of Mechanical Design, 137(11), 111405.
24. [24] Li, X., Chua, J. W., Yu, X., Li, Z., Zhao, M., Wang, Z., & Zhai, W. (2024). 3D-printed lattice structures for sound absorption: current progress, mechanisms and models, structural-property relationships, and future outlook. Advanced Science, 11(4), 2305232.
25. [25] Niknam, H., & Akbarzadeh, A. H. (2020). Graded lattice structures: Simultaneous enhancement in stiffness and energy absorption. Materials & Design, 196, 109129.
26. [26] Guo, M. F., Yang, H., & Ma, L. (2022). 3D lightweight double arrow-head plate-lattice auxetic structures with enhanced stiffness and energy absorption performance. Composite Structures, 290, 115484.
27. [27] Prajapati, M. J., Kumar, A., Lin, S. C., & Jeng, J. Y. (2022). Multi-material additive manufacturing with lightweight closed-cell foam-filled lattice structures for enhanced mechanical and functional properties. Additive Manufacturing, 54, 102766.
28. [28] Hou, W., He, P., Yang, Y., & Sang, L. (2023). Crashworthiness optimization of crash box with 3D-printed lattice structures. International Journal of Mechanical Sciences, 247, 108198.
29. [29] Wong, K. K., & Leong, K. C. (2018). Saturated pool boiling enhancement using porous lattice structures produced by Selective Laser Melting. International Journal of Heat and Mass Transfer, 121, 46-63.
30. [30] Cheng, L., Liang, X., Belski, E., Wang, X., Sietins, J. M., Ludwick, S., & To, A. (2018). Natural frequency optimization of variable-density additive manufactured lattice structure: theory and experimental validation. Journal of Manufacturing Science and Engineering, 140(10), 105002.
31. [31] Guo, M. F., Yang, H., & Ma, L. (2020). Design and characterization of 3D AuxHex lattice structures. International Journal of Mechanical Sciences, 181, 105700.
32. [32] Ashok, D., Raju Bahubalendruni, M. V. A., Johnney Mertens, A., & Balamurali, G. (2022). A novel nature inspired 3D open lattice structure for specific energy absorption. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 236(6), 2434-2440.
33. [33] Mora, S., Pugno, N. M., & Misseroni, D. (2022). 3D printed architected lattice structures by material jetting. Materials Today, 59, 107-132.
34. [34] Wang, Z., Luan, C., Liao, G., Yao, X., & Fu, J. (2019). Mechanical and self-monitoring behaviors of 3D printing smart continuous carbon fiber thermoplastic lattice truss sandwich structure. Composites Part B: Engineering, 176, 107215.
35. [35] Sing, S. L., Yeong, W. Y., Wiria, F. E., & Tay, B. Y. (2016). Characterization of titanium lattice structures fabricated by selective laser melting using an adapted compressive test method. Experimental Mechanics, 56(5), 735-748.
36. [36] Sing, S. L., Wiria, F. E., & Yeong, W. Y. (2018). Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior. Robotics and Computer-Integrated Manufacturing, 49, 170-180.
37. [37] Jana, P., Santoliquido, O., Ortona, A., Colombo, P., & Sorarù, G. D. (2018). Polymer-derived SiCN cellular structures from replica of 3D printed lattices. Journal of the American Ceramic Society, 101(7), 2732-2738.
38. [38] Liu, S., Li, Y., & Li, N. (2018). A novel free-hanging 3D printing method for continuous carbon fiber reinforced thermoplastic lattice truss core structures. Materials & Design, 137, 235-244.
39. [39] Zeng, C., Liu, L., Bian, W., Leng, J., & Liu, Y. (2022). Temperature-dependent mechanical response of 4D printed composite lattice structures reinforced by continuous fiber. Composite Structures, 280, 114952.
40. [40] Yuran, A. F., & Yavuz, İ. (2021). ENDÜSTRİ 4.0 VE 3 BOYUTLU YAZICILARIN KARŞILAŞTIRILMASI. Mühendis ve Makina, 62(704), 580-606.
41. [41] Yavuz, I., & Yildirim, A. (2023). Mechanical properties of PLA based closed porous structures manufactured using FDM process. Multidiscipline Modeling in Materials and Structures, 19(3), 493-506.
42. [42] Li, H., Geng, X., Huang, L., Liu, J., Jia, K., Xue, Z., & Aydeng, A. (2023). Effect of surface quality on the fracture behavior of 3D printed lattice structures. CIRP Journal of Manufacturing Science and Technology, 43, 170-180.
43. [43] Chiocca, A., Tamburrino, F., Frendo, F., & Paoli, A. (2022). Effects of coating on the fatigue endurance of FDM lattice structures. Procedia Structural Integrity, 42, 799-805.
44. [44] Ahn, S. H., Montero, M., Odell, D., Roundy, S., & Wright, P. K. (2002). Anisotropic material properties of fused deposition modeling ABS. Rapid prototyping journal, 8(4), 248-257.
45. [45] Fareed, M. I., Wu, C. M., & Sood, M. (2025). Quasi-Static Compression Behavior of Additively Manufactured Surface-Based Perforated Lattice Structure. Polymer Engineering & Science, 65(11), 5796-5809.
46. [46] Abele, E., Stoffregen, H. A., Klimkeit, K., Hoche, H., & Oechsner, M. (2015). Optimisation of process parameters for lattice structures. Rapid Prototyping Journal, 21(1), 117-127.
47. [47] Beloshenko, V., Beygelzimer, Y., Chishko, V., Savchenko, B., Sova, N., Verbylo, D., & Vozniak, I. (2023). Mechanical properties of thermoplastic polyurethane-based three-dimensional-printed lattice structures: Role of build orientation, loading direction, and filler. 3D Printing and Additive Manufacturing, 10(2), 245-255.
48. [48] Yuran, A. F. (2022). Üç boyutlu yazıcılar için yeni bir ekstruder tasarımı ve optimizasyonu (Doktora Tezi, Afyon Kocatepe Üniversitesi, Fen Bilimleri Enstitüsü). Afyonkarahisar.
49. [49] Saleh, M., Anwar, S., Al-Ahmari, A. M., & Alfaify, A. (2022). Compression performance and failure analysis of 3D-printed carbon fiber/PLA composite TPMS lattice structures. Polymers, 14(21), 4595.
50. [50] Korshunova, N., Alaimo, G., Hosseini, S. B., Carraturo, M., Reali, A., Niiranen, J., ... & Kollmannsberger, S. (2021). Image-based numerical characterization and experimental validation of tensile behavior of octet-truss lattice structures. Additive Manufacturing, 41, 101949.
51. [51] Ye, G., Bi, H., & Hu, Y. (2020). Compression behaviors of 3D printed pyramidal lattice truss composite structures. Composite Structures, 233, 111706.
52. [52] Viet, N. V., Karathanasopoulos, N., & Zaki, W. (2022). Mechanical attributes and wave propagation characteristics of TPMS lattice structures. Mechanics of Materials, 172, 104363.
53. [53] Shen, F., Yuan, S., Guo, Y., Zhao, B., Bai, J., Qwamizadeh, M., Chua, C. K. & Zhou, K. (2016). Energy absorption of thermoplastic polyurethane lattice structures via 3D printing: modeling and prediction. International Journal of Applied Mechanics, 8(07), 1640006.
54. [54] Rahman, H., Yarali, E., Zolfagharian, A., Serjouei, A., & Bodaghi, M. (2021). Energy absorption and mechanical performance of functionally graded soft–hard lattice structures. Materials, 14(6), 1366
55. [55] Nian, Y., Wan, S., Zhou, P., Wang, X., Santiago, R., & Li, M. (2021). Energy absorption characteristics of functionally graded polymer-based lattice structures filled aluminum tubes under transverse impact loading. Materials & Design, 209, 110011.
56. [56] Park, K. M., Min, K. S., & Roh, Y. S. (2021). Design optimization of lattice structures under compression: study of unit cell types and cell arrangements. Materials, 15(1), 97.
57. [57] Wang, C., Zhu, J. H., Zhang, W. H., Li, S. Y., & Kong, J. (2018). Concurrent topology optimization design of structures and non-uniform parameterized lattice microstructures. Structural and Multidisciplinary Optimization, 58(1), 35-50.
58. [58] Gorguluarslan, R. M., Gandhi, U. N., Song, Y., & Choi, S. S. (2017). An improved lattice structure design optimization framework considering additive manufacturing constraints. Rapid Prototyping Journal, 23(2), 305-319.
59. [59] Weeger, O., Boddeti, N., Yeung, S. K., Kaijima, S., & Dunn, M. L. (2019). Digital design and nonlinear simulation for additive manufacturing of soft lattice structures. Additive Manufacturing, 25, 39-49
60. [60] An, X., Lai, C., He, W., & Fan, H. (2019). Three-dimensional meta-truss lattice composite structures with vibration isolation performance. Extreme Mechanics Letters, 33, 100577.
61. [61] Li, H., Hu, Y., Huang, H., Chen, J., Zhao, M., & Li, B. (2021). Broadband low-frequency vibration attenuation in 3D printed composite meta-lattice sandwich structures. Composites Part B: Engineering, 215, 108772.
62. [62] Wang, Z., Yang, W., Liu, R., Zhang, X., Nie, H., & Liu, Y. (2021). Highly stretchable graphene/polydimethylsiloxane composite lattices with tailored structure for strain-tolerant EMI shielding performance. Composites Science and Technology, 206, 108652.
63. [63] Guo, X., Ding, J., Li, X., Qu, S., Fuh, J. Y. H., Lu, W. F., Song, X. & Zhai, W. (2023). Interpenetrating phase composites with 3D printed triply periodic minimal surface (TPMS) lattice structures. Composites Part B: Engineering, 248, 110351.
64. [64] Beyer, C., & Figueroa, D. (2016). Design and analysis of lattice structures for additive manufacturing. Journal of Manufacturing Science and Engineering, 138(12), 121014