YALIN HİZMET İŞLEMLERİ UYGULAMASI: TÜRK BANKACILIK ENDÜSTRİSİNDEN BİR ÖRNEK OLAY ANALİZİ

Öz

Bu çalışmada yalın yönetim ve bankacılık uygulaması ele alınmaktadır. Yalın yönetimin imalat ortamında anlamlı çıktılar sağlayacak şekilde atıl kaynakları ortadan kaldırmasından dolayı hizmet endüstrisi de yalın uygulamalarına odaklanmaya başlamıştır. Buradan hareketle, bu çalışma, özellikle yalın araçları kullanılarak Türkiye’de bankacılık sektöründeki atıl kullanımın ortadan kaldırılması anlamında öncü çalışmalardan birisi olmaktadır. Bu amaçla devlet bankalarından birisinin Ege Bölgesi’ndeki şubelerinden birisi pilot uygulama alanı olarak seçildi ve bu pilot çalışma alanında müşteriler, banka müşteri temsilcileri ve operasyonlar üzerinde gözlemler yapılarak veri toplanmıştır. Toplanan veriler analiz edildikten sonar gereksiz işlemlerin ortadan kaldırılmasına bağlı olarak bazı iyileştirmeler önerilmektedir. Elde edilen sonuçlar bankacılık sektörü için; katma değerli iş elemanlarına yoğunlaşmak suretiyle yapılan basit iyileştirmelerle anlamlı sonuçlara ulaşılabileceğini göstermektedir. Elde edilen sonuçlar bankanın diğer şubelerine de aynı şekilde uygulanabilmektedir

Anahtar Kelimeler

• Yalın Hizmet Yönetimi, Yalın Düşünce, Bankacılıkta Etkinlik

IMPLEMENTING LEAN SERVICE OPERATIONS: A CASE STUDY FROM TURKISH BANKING INDUSTRY

Öz

This paper describes lean management and its application in banking industry. Since lean management eliminates waste effectively in manufacturing environment with significant outputs, service industry has started to focus on lean implementations. In this sense, this paper is a pioneer especially for banking in service sector in Turkey to eliminate waste by means of lean methods. For this reason, a branch of a nationwide state bank in Aegean region was selected as pilot to collect data by observing customers, employee and operations. After analyzing the collected data, some improvements due to eliminations of unnecessary operations were offered. Our results show that significant improvements in banking sector are easy to achieve just by focusing value adding operations. Obtained results are also valid for other branches of the bank

Anahtar Kelimeler

• Lean Service Management, Lean Thinking, Efficiency in Banking

Kaynakça

1. Abdullah, F. (2003). Lean Manufacturing Tools and Techniques in the Process Industry with a Focus on Steel. Doctoral Thesis. Pittsburgh: University of Pittsburgh School of Engineering. Retrieved January 19, 2009, from the World Wide Web: http://etd.library.pitt.edu/ETD/available/etd-05282003-114851/ unrestricted/Abdullah.pdf
2. Ahlstrom, P. (2004). Lean Service Operations: Translating Lean Production Principles to Service Operations. International Journal of Services Technology and Management, 5(5/6), 545-564.
3. Arbos, L.C. (2002). Design of a Rapid Response and High Efficiency Service by Lean Production Principles: Methodology and Evaluation of Variability of Performance. International Journal of Production Economics, 80(2), 169-183.
4. Bevan, H., Westwood, N., Crowe, R., & O'Connor, M. (2005). Lean Six Sigma: Some Basic Concepts. Institute for Innovation and Improvement. Retrieved May 20, 2009, from the World Wide Web: http://www.nodelaysscotland.scot.nhs.uk/SiteCollectionDocuments /NoDelays/Documents/Adobe%20PDFs/RG0046%20Lean%20Six% 20Sigma%20-%20the%20basic%20concepts.pdf
5. Buzby, C.M., Gerstenfeld, A., Voss, L.E. & Amy, Z.Z. (2002). Using Lean Principles to Streamline the Quotation Process - A Case Study. Industrial Management & Data Systems, 102(9), 513-520.
6. Cheng, T.C.E, Podolsky, S. & Jarvis, P. (1998). Just-in-time Manufacturing: An Introduction. Chapmann and Hall
7. Cook, C.R. & Graser, J.C. (2001). Military Airframe Acquisition Costs: The Effects of Lean Manufacturing, Rand Dist., Santa Monica. Retrieved January 21, 2009, from the World Wide Web: http://www.rand.org/pubs/monograph_reports/MR1325/MR1325.ch 2.pdf
8. Cuatrecasas, L. (2004). A Lean Management Implementation Method in Service Operations. International Journal of Services Technology and Management, 5(5/6), 532-544.

9. Henry, P. (2008). Capital Gains: Lean in Financial Services. Retrieved January 29, 2009, http://www.venturehaus.com/pdf/Capital_Gains_Lean_in_Financial _Services_28072008.pdf
10. from the World Wide Web:
11. EPA (2003). Lean Manufacturing and the Environment: Research on Advanced Manufacturing Systems and the Environment and Recommendations for Leveraging Better Performance, Retrieved August 20, 2009, from the World Wide Web: http://www.epa.gov/lean/leanreport.pdf Environmental
12. Hallam, R.A.C. (2001). Lean Thinking. Retrieved June 1, 2009, from the World Wide Web: http://web.mit.edu/esd.83/www/notebook /Lean%20Thinking.doc
13. Hayes, R.H. & Pisano, P.G. (1994). Beyond World Class: The New Manufacturing Strategy. Harvard Business Review, January- February, 77-86.
14. Krar, S. (2007). Cellular Manufacturing. Retrieved May 20, 2009, from the World Wide Web: http://www.productivitydevelopment.com/ 71%20Cellular%20Mfg.pdf
15. Lean Management Institute, (June 2004). Lean Service Summit, Retrieved January 29, 2009 from the World Wide Web: http://www.lean.org/Lean/Lean%20Summit%20Programme.pdf
16. Mandacı, P.E. & Soydan, H. (2002). Capital Markets. İstanbul: Literatür Yayıncılık.
17. Michalska, J. & Szewieczek, D. (2007). The 5S Methodology as a Tool for Improving the Organization. Journal of Achievements in Materials and Manufacturing Engineering, 24(2), 211-214.
18. Naval, P.M. (2008). Process Improvements in a Material Handling Activity by Applying Lean Production Techniques. Master Thesis. Universitat Politecnica De Catalunya. Retrieved January 19, 2009, from the World Wide Web: https://upcommons.upc.edu/ pfc/bitstream/2099.1/5585/1/memoria.pdf
19. Productivity Center (2008). Lean in Administrative and Business Processes. Retrieved January, 29, 2009, from the World Wide Web: september2009.pdf
20. Radhakrishan, R. & Balasubramanian, S. (2008). Business Process Reegineering - Text & Cases, New Delhi: PHI Learning Pvt.
21. Radisic, M. (2009). Just in Time Concept. Retrieved May 20, 2009, from the World Wide Web: http://www.zlw-ima.rwth-aachen.de/ mitarbeiter/dokumente/2-Mladen-Radisic-JIT.pdf
22. Radnor, Z. & Walley, P. (2008). Learning to Walk Before We Try to Run: Adapting Lean for the Public Sector. Public Money & Management, 28(1), 13-20.
23. Rose, P.S. (2002). Commercial Bank Management. New York: McGraw Hill.
24. Shah, R. & Ward P.T. (2007). Defining and Developing Measures of Lean Production. Journal of Operations Management, 25(4), 785-805.
25. The Productivity Development Team (1999). Cellular Manufacturing: One-Piece Flow for Workteams. Portland: Productivity Press.
26. Venkatesh, J. (2007). An Introduction to Total Productive Maintenance (TPM). Retrieved May 20, 2009, from the World Wide Web: http://www.plant-maintenance.com/articles/tpm_intro.pdf
27. Villiers, F. (2006). The Lean, Agile and World Class Manufacturing Cookbook. Retrieved June 1, 2009, from the World Wide Web: http://www.endustrimuhendisim.net/file.axd?file=lean+thinking.pdf
28. Warner, M. (1996). The International Encylopedia of Business and Management, IEBM Series Vol. 1. California: Routledge Inc.
29. Williams, J. (1998). The Blackwell Encyclopedic Dictionary of Finance. In D. Paxon, D. Wood (Eds.), Massachusetts: Blackwell Publishing.
30. Womack, J.P., Jones D.T. & Ross, D. (1991). The Machine That Changed the World, Retrieved June 1, 2009, from the World Wide Web: http://web.mit.edu/esd.83 /www/notebook/machine.pdf