Araştırma Makalesi

3D PRINTED HOLTER ELECTROCARDIOGRAM (ECG)

Cilt: 6 Sayı: 3 31 Aralık 2022
PDF İndir
EN

3D PRINTED HOLTER ELECTROCARDIOGRAM (ECG)

Öz

This study was aimed to design a low cost and ergonomic Holter Electrocardiogram (ECG) that allows remote monitoring of patients who need to be followed up by a doctor with the Covid19 pandemic period, sends SMS to the doctor or relatives of the patient in risky situations, and recordes and stores patient data. In this study, a 55x84 mm PCB electronic circuit was designed. Signals received from the patient through the electrodes are detected with the help of the AD8232 ECG sensor and transmitted to the ESP32, which is the processor of the system, and an SMS is sent to the doctor or relatives of the patient in risky situations, thanks to the UG96 GSM module. In addition, thanks to the wifi feature of the UG96 GSM module, the ECG data recorded in risky situations is stored in the ubidots. The doctor can access the patient's ECG data via ubidots.

Anahtar Kelimeler

Kaynakça

  1. 1. World Health Organization, “The top 10 causes of death”, https://www.who.int/news-room/ fact-sheets/detail/the-top-10-causes-of-death, September 15, 2021.
  2. 2. Uymaz, S.C., “Development of Holter ECG”, Unpublished M.Sc. Thesis, 2022-M.Sc.-032, Aydın Adnan Menderes University, Turkey, 2022.
  3. 3. Chen, N., Zhou, M., Dong, X., Qu, J., Gong, F., Han, Y., Qiu, Y., Wang, J., Liu, Y., Wei, Y., Xia, J., Yu, T., Zhang, X., Zhang, L., “Epidemiological and clinical characteristics of 99 cases of 2019 novel coronavirus pneumonia in Wuhan, China: a descriptive study”, Lancet, Issue 395(10223), Pages 507-513, 2020. doi: 10.1016/S0140-6736(20)30211-7.
  4. 4. Huang, C., Wang, Y., Li, X., Ren, L., Zhao, J., Hu, Y., “Clinical features of patients infected with 2019 novel Coronavirus in Wuhan, China”, Lancet, Issue 395, Pages 497-506, 2020.
  5. 5. Wang, D., Hu, B., Hu, C., “Clinical characteristics of 138 hospitalized patients with 2019 novel coronavirus–infected pneumonia in Wuhan, China”, JAMA, Volume 323(11), Pages 1061–1069, 2020. doi:10.1001/jama.2020.1585
  6. 6. Long, B., Brady, W.J., Koyfman, A., Gottlieb, M., “Cardiovascular complications in COVID-19”, The American Journal of Emergency Medicine, Issue 38, Pages 1504-1507, 2020.
  7. 7. Kochi, A.N., Tagliari, A.P,, Forleo, G.B., Fassini, G.M., Tondo, C., “Cardiac and arrhythmic complications in patients with COVID19”, Journal of Cardiovascular Electrophysiology, Vol. 31, Issue 5, Pages 1003-1008, 2020.
  8. 8. Einstein, A.J., Shaw, L.J., Hirschfeld, C., Williams, M.C., Villines, T.C., Better, N., Vitola, J.V., Cerci, R., Dorbala, S., Raggi, P., Choi, A.D., Lu, B., Sinitsyn, V., Sergienko, V., Kudo, T., Nørgaard, B.L., Maurovich-Horvat, P., Campisi, R., Milan, E., Louw, L., Allam, A.H., Bhatia, M., Malkovskiy, E., Goebel, B., Cohen, Y., Randazzo, M., Narula, J., Pascual, T.N.B., Pynda, Y., Dondi, M., Paez, D., The INCAPS COVID Investigators Group. International Impact of COVID-19 on the Diagnosis of Heart Disease, J Am Coll Cardiol, Vol. 77, Issue 2, Pages 173-185, 2021. doi: 10.1016/j.jacc.2020.10.054.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Makine Mühendisliği

Bölüm

Araştırma Makalesi

Yayımlanma Tarihi

31 Aralık 2022

Gönderilme Tarihi

13 Haziran 2022

Kabul Tarihi

11 Ağustos 2022

Yayımlandığı Sayı

Yıl 2022 Cilt: 6 Sayı: 3

Kaynak Göster

APA
Demircioğlu, P., Böğrekci, İ., & Uymaz, Ş. C. (2022). 3D PRINTED HOLTER ELECTROCARDIOGRAM (ECG). International Journal of 3D Printing Technologies and Digital Industry, 6(3), 429-437. https://doi.org/10.46519/ij3dptdi.1130004
AMA
1.Demircioğlu P, Böğrekci İ, Uymaz ŞC. 3D PRINTED HOLTER ELECTROCARDIOGRAM (ECG). IJ3DPTDI. 2022;6(3):429-437. doi:10.46519/ij3dptdi.1130004
Chicago
Demircioğlu, Pınar, İsmail Böğrekci, ve Şerife Cansu Uymaz. 2022. “3D PRINTED HOLTER ELECTROCARDIOGRAM (ECG)”. International Journal of 3D Printing Technologies and Digital Industry 6 (3): 429-37. https://doi.org/10.46519/ij3dptdi.1130004.
EndNote
Demircioğlu P, Böğrekci İ, Uymaz ŞC (01 Aralık 2022) 3D PRINTED HOLTER ELECTROCARDIOGRAM (ECG). International Journal of 3D Printing Technologies and Digital Industry 6 3 429–437.
IEEE
[1]P. Demircioğlu, İ. Böğrekci, ve Ş. C. Uymaz, “3D PRINTED HOLTER ELECTROCARDIOGRAM (ECG)”, IJ3DPTDI, c. 6, sy 3, ss. 429–437, Ara. 2022, doi: 10.46519/ij3dptdi.1130004.
ISNAD
Demircioğlu, Pınar - Böğrekci, İsmail - Uymaz, Şerife Cansu. “3D PRINTED HOLTER ELECTROCARDIOGRAM (ECG)”. International Journal of 3D Printing Technologies and Digital Industry 6/3 (01 Aralık 2022): 429-437. https://doi.org/10.46519/ij3dptdi.1130004.
JAMA
1.Demircioğlu P, Böğrekci İ, Uymaz ŞC. 3D PRINTED HOLTER ELECTROCARDIOGRAM (ECG). IJ3DPTDI. 2022;6:429–437.
MLA
Demircioğlu, Pınar, vd. “3D PRINTED HOLTER ELECTROCARDIOGRAM (ECG)”. International Journal of 3D Printing Technologies and Digital Industry, c. 6, sy 3, Aralık 2022, ss. 429-37, doi:10.46519/ij3dptdi.1130004.
Vancouver
1.Pınar Demircioğlu, İsmail Böğrekci, Şerife Cansu Uymaz. 3D PRINTED HOLTER ELECTROCARDIOGRAM (ECG). IJ3DPTDI. 01 Aralık 2022;6(3):429-37. doi:10.46519/ij3dptdi.1130004

 download

Uluslararası 3B Yazıcı Teknolojileri ve Dijital Endüstri Dergisi Creative Commons Atıf-GayriTicari 4.0 Uluslararası Lisansı ile lisanslanmıştır.