Araştırma Makalesi

USING CFD TO ANALYZE WIND VELOCITY AROUND BUILDINGS TO DETERMINE THE APPROPRIATE WIND VELOCITY

Cilt: 7 Sayı: 1 29 Nisan 2023
PDF İndir
EN

USING CFD TO ANALYZE WIND VELOCITY AROUND BUILDINGS TO DETERMINE THE APPROPRIATE WIND VELOCITY

Öz

A 2d numerical study has been conducted by using Ansys Fluent 2020R2 program to design 4 different cases(shapes) for buildings at a different initial velocity value (2,4,6 m/sec) .in order to find a way to benefit from the areas where the winds velocity is small and it not enough to operate the winds turbines. Where a velocity analysis has been carried out for the four cases, each of them separately, and the intensity of turbulence and pressure around the buildings has been calculated. The highest velocity has been obtained at case 3, where the velocity has been reached to 4 m/sec when Vinlet was equal to 2m/sec. The best case has been determined and the streamline and the vector for velocity have been presented for the best case. The area between the two buildings has been divided to six parts. for the best case of the buildings in order to find the area where the velocity flow is high to put the wind turbine . The dimensions, height and initial velocity for appropriate turbine ,have been determined. The initial and final velocities of the used turbine have been determined. Also, the annual energy calculations have been found to increase the speed by using the Weibull distribution. finally it has been determined the annual energy production for the selected region for the first case(region without two buildings) was 68 kWatt hours, but this value increase to 294 kWatt hours in the new case (the region when putting two buildings). That means, the power was increased by 76%.

Anahtar Kelimeler

Kaynakça

  1. 1. IEA, “Key World Energy Statistics 2021 Statistics Report” IEA Publ., Pages 1–82, 2021.
  2. 2. Euclid A. Rose “OPEC’s Dominance of the Global Oil Market: The Rise of the World’s Dependency on Oil", The Middle East Journal, Vol. 58, Issue 3, Pages 424-443, 2004.
  3. 3. B. Bulut, “Remaining Useful Life Prediction in Wind Farms”, International Journel of 3D Printing, Technology and Digital Industry Vol. 5, Issue 2, Pages 145–154, Aug. 2021.
  4. 4. S. Gorjian, “An Introduction to the Renewable Energy Resources”, Renewable Energy Technologies Vol. 4, Pages 41-42, June. 2017.
  5. 5. IRENA, International Renewable Energy Agency, “Global renewable outlook - energy transformation 2050”, 2020.
  6. 6. Department of Energy, “Wind Market Reports: 2021Edition”, https://www.energy.gov/eere/wind/wind-market-reports-2021-edition, 2021. 7. A. Iqbal, V. Chitturi, and K. V. L. Narayana, “A Novel Vertical Axis Wind Turbine for Energy Harvesting on the Highways”, 2019 Innov. Power Adv. Comput. Technol. i-PACT 2019.
  7. 8. G. Boroumandjazi, R. Saidur, B. Rismanchi, and S. Mekhilef, “A review on the relation between the energy and exergy efficiency analysis and the technical characteristic of the renewable energy systems”, Renewable and Sustainable Energy Reviews, Vol. 16, Issue 5, Pages 3131–3135, Jun. 2012.
  8. 9. C. M. Hsieh and C. K. Fu, “Evaluation of Locations for Small Wind Turbines in Costal Urban Areas Based on a Wind Energy Potential Map”, Environmental Modeling and Assessment, Vol. 18, Issue 5, Pages 593–604, 2013.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Mühendislik

Bölüm

Araştırma Makalesi

Erken Görünüm Tarihi

28 Nisan 2023

Yayımlanma Tarihi

29 Nisan 2023

Gönderilme Tarihi

6 Eylül 2022

Kabul Tarihi

17 Nisan 2023

Yayımlandığı Sayı

Yıl 2023 Cilt: 7 Sayı: 1

Kaynak Göster

APA
Bakırcı, M., & Mohammed, N. (2023). USING CFD TO ANALYZE WIND VELOCITY AROUND BUILDINGS TO DETERMINE THE APPROPRIATE WIND VELOCITY. International Journal of 3D Printing Technologies and Digital Industry, 7(1), 129-141. https://doi.org/10.46519/ij3dptdi.1171463
AMA
1.Bakırcı M, Mohammed N. USING CFD TO ANALYZE WIND VELOCITY AROUND BUILDINGS TO DETERMINE THE APPROPRIATE WIND VELOCITY. IJ3DPTDI. 2023;7(1):129-141. doi:10.46519/ij3dptdi.1171463
Chicago
Bakırcı, Mehmet, ve Noor Mohammed. 2023. “USING CFD TO ANALYZE WIND VELOCITY AROUND BUILDINGS TO DETERMINE THE APPROPRIATE WIND VELOCITY”. International Journal of 3D Printing Technologies and Digital Industry 7 (1): 129-41. https://doi.org/10.46519/ij3dptdi.1171463.
EndNote
Bakırcı M, Mohammed N (01 Nisan 2023) USING CFD TO ANALYZE WIND VELOCITY AROUND BUILDINGS TO DETERMINE THE APPROPRIATE WIND VELOCITY. International Journal of 3D Printing Technologies and Digital Industry 7 1 129–141.
IEEE
[1]M. Bakırcı ve N. Mohammed, “USING CFD TO ANALYZE WIND VELOCITY AROUND BUILDINGS TO DETERMINE THE APPROPRIATE WIND VELOCITY”, IJ3DPTDI, c. 7, sy 1, ss. 129–141, Nis. 2023, doi: 10.46519/ij3dptdi.1171463.
ISNAD
Bakırcı, Mehmet - Mohammed, Noor. “USING CFD TO ANALYZE WIND VELOCITY AROUND BUILDINGS TO DETERMINE THE APPROPRIATE WIND VELOCITY”. International Journal of 3D Printing Technologies and Digital Industry 7/1 (01 Nisan 2023): 129-141. https://doi.org/10.46519/ij3dptdi.1171463.
JAMA
1.Bakırcı M, Mohammed N. USING CFD TO ANALYZE WIND VELOCITY AROUND BUILDINGS TO DETERMINE THE APPROPRIATE WIND VELOCITY. IJ3DPTDI. 2023;7:129–141.
MLA
Bakırcı, Mehmet, ve Noor Mohammed. “USING CFD TO ANALYZE WIND VELOCITY AROUND BUILDINGS TO DETERMINE THE APPROPRIATE WIND VELOCITY”. International Journal of 3D Printing Technologies and Digital Industry, c. 7, sy 1, Nisan 2023, ss. 129-41, doi:10.46519/ij3dptdi.1171463.
Vancouver
1.Mehmet Bakırcı, Noor Mohammed. USING CFD TO ANALYZE WIND VELOCITY AROUND BUILDINGS TO DETERMINE THE APPROPRIATE WIND VELOCITY. IJ3DPTDI. 01 Nisan 2023;7(1):129-41. doi:10.46519/ij3dptdi.1171463

 download

Uluslararası 3B Yazıcı Teknolojileri ve Dijital Endüstri Dergisi Creative Commons Atıf-GayriTicari 4.0 Uluslararası Lisansı ile lisanslanmıştır.