Cilt: 10 Sayı: 3 , 9.11.2021

Yıl: 2021

The International Journal of Automotive Engineering and Technologies - IJAET addresses the latest advances in field of Automotive Engineering, Science and Technologies. IJAET is an international journal for scientists and automotive engineers involved in the fields of automotive engineering sciences and its applications to publish high quality and refereed papers. Papers reporting original research and innovative applications from all parts of the world are invited. Papers for publication in the IJAET are selected through rigorous peer review to make sure the originality, timeliness, relevance, and readability. IJAET also seeks clearly written survey and review articles from experts in the field, to promote insightful understanding of the state-of-the-art and application trends.

The IJAET aims to cover the advances in the field of Automotive Engineering & Technologies but not limited to the following branches:

Automotive Electrical Electronics

  • Automotive Electrical Systems
  • Automotive Electronics
  • Vehicle Diagnostics
  • Automotive User Interfaces

Materials and Recycling, Manufacturing*

  • Automotive Materials
  • Manufacturing Technologies
  • Advanced Materials
  • Light-Weighting Strategies

Alternative Energy & Vehicle

  • Energy Resources and Ecology
  • Alternative Fuels
  • Fuels and Lubricants
  • New and Renewable Energy Technologies
  • Fuel Cell, Hybrid and Electrical Vehicle
  • Advanced Battery Technologies
  • Power Electronic and Electric Motor Drives

Energy Conversion and Management

  • Heat Transfer, Fluid and Thermal Engineering
  • Automotive Transmission
  • Waste Heat Recovery

Vehicle transport systems

  • Intelligent Vehicle / Transportation Systems
  • Connected Vehicles
  • Sustainable Transport

Vehicle dynamics and control

  • Vehicle Dynamics
  • Automobile Chassis & Vehicle Dynamic
  • Accident Analyze

Engine/Emission Technology

  • Automotive Pollution and Control

Combustion

  • Combustion Control and Optimization
  • Low Temperature Combustion

Vehicle Maintenance

Vehicle Safety

  • Automobile Body and Safety
  • Active and Passive Vehicle Safety

Vehicle Design and Development

Virtual Reality

Internal Combustion Engine

  • High-Efficiency Engines
  • Engine Dynamic
  • Engine Thermodynamic

Vehicle Simulation and Test Methods

Buses, Trucks and Heavy Vehicles

Vehicles for Specific Purposes (rail vehicles, military vehicles, Heavy Machinery, etc.).

Vehicle NVH

  • Vehicle Vibrations and Noise
  • NVH Analysis and Simulations

Vehicle Alternative Propulsion Systems

Autonomous Vehicles

  • Image, Radar, Lidar Signal Processing

Automotive Human Factors and Ergonomics

  • Air-Conditioning
  • Comfort

* Topics must include automotive engineering and technologies

Copyright Notice

Submission of an original manuscript to the Journal will be taken to mean that it represent original work not previously published, that it is not being considered elsewhere for publication; that the author is willing to assign copyright to the Journal as per a contract that will be sent to the author just prior to publication and, if accepted for publcation, it will be published in online and it will not be published elsewhere in the same form, for commercial purposes, in any language, without the consent of the publisher.

Author Guidelines

Please follow the following instructions:

Page Setup

The page settings will be as follows:

Margins

Top: 2.5 cm Bottom 2.5 cm

Left: 2.5 cm Right: 2.5 cm

Paper Portrait, A4 size (21 cm x 29.7 cm)

Title of Article

Times New Roman, Font size 14, Center the title

Author(S) Name

Times New Roman, Font size 12, Center the author(s) name

Organization Name and Address

Times New Roman, Font size 9

Abstract

Abstract should be between 200 to 300 words. Times New Roman, Font size 11

Keywords

Key words should consist of at least 3 different keywords. Times New Roman, Font size 9

All Text

Times New Roman, Font size 12, Single Spaced, justify both sides, First Line of all Paragraphs indented, No Line Breaks between Paragraphs, Line Breaks between sections.

In case of 2 columns

Column Width: 7.6 cm

Column Spacing: 0.8 cm

With equal column width

1. Introduction,

2. Literature Review,

3. Materials and Methods,

4. Results and Discussion,

5. Conclusions,

Acknowledgement,

Nomenclature,

6. References,

Article(s)

Author(s), “Article Title”, Publication Name, Volume Number, Issue Number, Pages First Page-Last Page, Date of Publication.

Book(s)

Author(s), “Book Title”, Publisher, Date of Publication of the Book.

Web addresses

http://dergipark.gov.tr/ijaet, day/mounth/year

Photographs

JPG and GIF format, Inserted immediately after the citation in the text.

Tables

Times New Roman, Font size 8-10 Inserted immediately after the citation in the text

File Format

The article format should be Microsoft word (Please, use format Microsoft word 1997-2003).

File Name

File name must be between two to four words. Use the title of your research paper as the file name. Avoid the words AP, Journal, Manuscript, Paper for AP – IJAET.

Editor in-Chief

Murat Ciniviz
Prof. Dr. Murat CİNİVİZ Selçuk Üniversitesi, Teknoloji Fakültesi, Makine Mühendisliği Bölümü Web

Prof. Dr. Murat Ciniviz is currently serving as a faculty member at Selçuk University, Faculty of Technology, Department of Mechanical Engineering, in Konya, Turkey.
He received his Bachelor’s degree in Automotive Education from Gazi University, Faculty of Technical Education, Department of Mechanical Education, in 1998. In 2022, he earned a second Bachelor’s degree in Mechanical Engineering from Necmettin Erbakan University, SAC Faculty of Engineering. He completed his Master’s degree in Automotive Education at Selçuk University, Graduate School of Natural and Applied Sciences, in 2001, and obtained his Ph.D. in Mechanical Engineering from the same institution in 2005.
In 2012, he was awarded the title of Associate Professor in the field of Mechanical Technologies, and since 2017, he has been serving as a Professor.

With 27 years of teaching experience, Prof. Ciniviz has authored numerous articles indexed in the Web of Science under SCI. He has contributed to several book chapters and serves as the Editor-in-Chief and publisher of the International Journal of Automotive Engineering and Technologies.

His research interests include Internal Combustion Engines, Engine Performance and Emission Testing, Combustion Analysis, Thermodynamics, Alternative Fuels, and Engine Design.

İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği, Taşıt Tekniği ve Dinamiği

Editors

Murat Ciniviz
Prof. Dr. Murat CİNİVİZ Selçuk Üniversitesi, Teknoloji Fakültesi, Makine Mühendisliği Bölümü Web

Prof. Dr. Murat Ciniviz is currently serving as a faculty member at Selçuk University, Faculty of Technology, Department of Mechanical Engineering, in Konya, Turkey.
He received his Bachelor’s degree in Automotive Education from Gazi University, Faculty of Technical Education, Department of Mechanical Education, in 1998. In 2022, he earned a second Bachelor’s degree in Mechanical Engineering from Necmettin Erbakan University, SAC Faculty of Engineering. He completed his Master’s degree in Automotive Education at Selçuk University, Graduate School of Natural and Applied Sciences, in 2001, and obtained his Ph.D. in Mechanical Engineering from the same institution in 2005.
In 2012, he was awarded the title of Associate Professor in the field of Mechanical Technologies, and since 2017, he has been serving as a Professor.

With 27 years of teaching experience, Prof. Ciniviz has authored numerous articles indexed in the Web of Science under SCI. He has contributed to several book chapters and serves as the Editor-in-Chief and publisher of the International Journal of Automotive Engineering and Technologies.

His research interests include Internal Combustion Engines, Engine Performance and Emission Testing, Combustion Analysis, Thermodynamics, Alternative Fuels, and Engine Design.

İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği, Taşıt Tekniği ve Dinamiği

Assistant Editor

Hibrit ve Elektrikli Araçlar ve Güç Aktarma Organları, Otomotiv Güvenlik Mühendisliği, Otomotiv Mekatronik ve Otonom Sistemler, Taşıt Tekniği ve Dinamiği
Fatih Aydın
Doç. Dr. Fatih AYDIN Necmettin Erbakan University Faculty of Engineering Web

Doç. Dr. Fatih AYDIN, Necmettin Erbakan Üniversitesi Mühendislik Fakültesi Enerji Sistemleri Mühendisliği Bölümü'nde öğretim üyesidir. Otomotiv Mühendisliği alanında Doçent unvanına sahiptir. Güncel araştırma alanları arasında içten yanmalı motorlar, biyoyakıtlar ve alternatif enerji kaynakları yer almaktadır.

İçten Yanmalı Motorlar
Default avatar
Prof. Dr. Can HAŞİMOĞLU SAKARYA UYGULAMALI BİLİMLER ÜNİVERSİTESİ
İçten Yanmalı Motorlar
Seyfi Polat
Prof. Seyfi POLAT HİTİT ÜNİVERSİTESİ Web
İçten Yanmalı Motorlar

Editorial Board

Default avatar
Prof. Dr. Tanzer ERYILMAZ YOZGAT BOZOK ÜNİVERSİTESİ, ZİRAAT FAKÜLTESİ, TARIM MAKİNELERİ ve TEKNOLOJİLERİ MÜHENDİSLİĞİ BÖLÜMÜ, TARIM MAKİNELERİ ve TEKNOLOJİLERİ MÜHENDİSLİĞİ ANABİLİM DALI
Yenilenebilir Enerji Sistemleri, Tarımsal Enerji Sistemleri

Aksaray Üniversitesi, Makine Mühendisliği Bölümü

Isı transferi, Nanaoakışkanlar, CFD, Salınımlı akışlar, Sınır tabaka

 

Otomotivde Isı Transferi
Default avatar
Prof. Dr. Adrian CLENCİ National University of Science and Technology "POLITEHNICA", Pitesti University Centre Web

1996 – Bachelor degree in Automotive Engineering at University of Pitesti, Romania
1997 – Master degree in Internal Combustion Engines at University of Pitesti
1996 – 1998, engineer within the Engine Design Department of Dacia Automotive plant
1998 – Master degree in Science et Technologie de Matériaux at University of Pitesti (French taught master)
2003 – PhD degree at Transilvania University of Brasov, Romania in Mechanical Engineering field with a thesis on Variable Compression Ratio engines
2003 – 2006, 4 post-doctorate stages (internships) at Cnam Paris
2007 – present, Member in the FISITA's Education Committee
2007 – 2011, Director of Department of Scientific Research, University of Pitesti
2008 – 2020, Associate researcher at Cnam Paris, Laboratoire de Chimie Moléculaire et Génie des Procédés Chimiques et Energétique
2011 – 2019, Director of Department Automobiles and Transport, University of Pitesti
2012 – 2020, President of Society of Automotive Engineers of Romania (www.siar.ro)
2017, Habilitation for conducting PhD thesis in Automotive Engineering
2020 - 2024, ViceRector Scientific Research, University of Pitesti, Romania

1998 – present, Teaching and research activities at Department Automobiles and Transport (junior assistant, assistant, lecturer, assoc. professor or senior lecturer, full professor) from the University of Pitesti (now, merged within the National University of Science and Technology "POLITEHNICA")

Akışkan Akışı, Isı ve Kütle Transferinde Hesaplamalı Yöntemler (Hesaplamalı Akışkanlar Dinamiği Dahil), Hibrit ve Elektrikli Araçlar ve Güç Aktarma Organları, İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği
Default avatar
Dr. Guohong TİAN University of Surrey
İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği
Default avatar
Dr. Öğr. Üyesi Mehmet DEMİRALP NİĞDE TEKNİK BİLİMLER MESLEK YÜKSEKOKULU Web
İçten Yanmalı Motorlar
Habib Gürbüz
Prof. Dr. Habib GÜRBÜZ SÜLEYMAN DEMİREL ÜNİVERSİTESİ Web

Prof. Dr. Habib GÜRBÜZ şu anda Süleyman Demirel Üniversitesi, Mühendislik ve Doğa Bilimleri Fakültesi, Otomotiv Mühendisliği Bölümü'nde çalışmaktadır. Otomotiv Teknolojileri, İçten Yanmalı Motorlar, Hidrojen Enerjisi, Yakıt Pilleri, Atık Isı Geri Dönüşümü, Yakma Sistemleri alanlarında çalışmaktadır. 

Hibrit ve Elektrikli Araçlar ve Güç Aktarma Organları, İçten Yanmalı Motorlar, Otomotiv Güvenlik Mühendisliği, Otomotiv Yanma ve Yakıt Mühendisliği
Fatih Aydın
Doç. Dr. Fatih AYDIN Necmettin Erbakan University Faculty of Engineering Web

Doç. Dr. Fatih AYDIN, Necmettin Erbakan Üniversitesi Mühendislik Fakültesi Enerji Sistemleri Mühendisliği Bölümü'nde öğretim üyesidir. Otomotiv Mühendisliği alanında Doçent unvanına sahiptir. Güncel araştırma alanları arasında içten yanmalı motorlar, biyoyakıtlar ve alternatif enerji kaynakları yer almaktadır.

İçten Yanmalı Motorlar
ORCID: http://orcid.org/0000-0002-7396-2695
Termodinamik ve İstatistiksel Fizik, Akışkan Mekaniği ve Termal Mühendislik, Akışkan Akışı, Isı ve Kütle Transferinde Hesaplamalı Yöntemler (Hesaplamalı Akışkanlar Dinamiği Dahil), Yenilenebilir Enerji Sistemleri, Makine Mühendisliği, Enerji Üretimi, Dönüşüm ve Depolama (Kimyasal ve Elektiksel hariç), İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği
Seyfi Polat
Prof. Seyfi POLAT HİTİT ÜNİVERSİTESİ Web
İçten Yanmalı Motorlar
Altin Dorri
Prof. Dr. Altin DORRİ Polytechnic University of Tirana Web

Prof. Altin Dorri within 25 years as university member obtained obtained Ph.D. in 2010 at Polytechnic University of Tirana (PUT) in the field “CFD simulation of pollutant formation in Internal Combustion Engine” and from 2023 is full Prof. at PUT. From 2012 ÷ 2020 was Head of Energy Department at PUT. From 2020 is Vice Dean of the Faculty of Mechanical Engineering at PUT. Has more than 50 scientific publications in field of energy and environmental issue. Research activity is related within energy transformation, conservation and renewable energy production.

İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği
Fatih Aksoy
Prof. Dr. Fatih AKSOY Afyon Kocatepe Üniversitesi
Termodinamik ve İstatistiksel Fizik, Mühendislik, Enerji, İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği
Default avatar
Doç. Dr. Ratchagaraja DHAİRİYASAMY Department of Electronics and Communication Engineering, Saveetha School of Engineering, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, Tamilnadu, India.
Makine Mühendisliğinde Optimizasyon Teknikleri, İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği, Otomotivde Isı Transferi
Endüstriyel Ürün Tasarımı, Yenilenebilir Enerji Sistemleri, Akustik ve Gürültü Kontrolü (Mimari Akustik hariç), Enerji Üretimi, Dönüşüm ve Depolama (Kimyasal ve Elektiksel hariç), Hibrit ve Elektrikli Araçlar ve Güç Aktarma Organları, İçten Yanmalı Motorlar, Mekanik Titreşimler ve Gürültü, Otomotiv Yanma ve Yakıt Mühendisliği, Taşıt Tekniği ve Dinamiği
İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği
Sivakumar Muthusamy
Doç. Dr. Sivakumar MUTHUSAMY K.S.R. College of Engineering

Dr.M.Sivakumar is currently working as an Associate Professor in the Department of
Mechanical Engineering at KSR Institute for Engineering and Technology, Thirchengode,
Tamil Nadu, India. He received his Bachelor of Engineering in Mechanical Engineering from
Bharthiyar University, Coimbatore, Tamil Nadu, India, in 1997. He completed his Master of
Engineering in Energy Engineering and Management from Annamalai University,
Chidambaram, Tamil Nadu, India, in 2004. He obtained his Doctor of Philosophy in the field
of IC engines and Alternative fuels from Anna University, Chennai, Tamil Nadu, India, in 2018.
He has 16.5 years of teaching experience and 6 years of industrial experience. He has published
10 articles in various SCI and Scopus – indexed journals including Elsevier, Taylor & Franics
and Wiley. He has published book chapters, ISBN book and 03 utility patents. He has reviewed
more than 50 manuscripts for various international journals. He is an editorial member for the
International Journal of Sustainable and Green Energy (ISSN: 2575-2189), Science Publishing
Group, New York, U.S.A. His research areas include IC engines, Alternative fuels and biofuels.

Öğretim Teknolojileri, Enerji Üretimi, Dönüşüm ve Depolama (Kimyasal ve Elektiksel hariç), İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği
Default avatar
Dr. Öğr. Üyesi Aleksandr KABANOV Kharkiv National Automobile and Highway University
İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği, Otomotivde Isı Transferi

Dr. Fuhaid Alshammari is anassociate professor in the Department of Mechanical Engineering at the University of Ha’il, Saudi Arabia. He earned his BSc in Mechanical Engineering from King Fahd University of Petroleum and Minerals (KFUPM), his MSc from Gannon University, USA, and his PhD from Brunel University, UK.
Dr. Fuhaid specializes in energy systems, with a focus on advanced organic Rankine cycle (ORC) technologies, waste heat recovery systems, and thermodynamic optimization. His expertise extends to enhancing the thermal efficiency of off-highway vehicles and automotive systems using cutting-edge approaches such as reheat ORC configurations and high-pressure ratio radial turbines.

Enerji, İçten Yanmalı Motorlar

Dr. Mohamed R. Gomaa holds a Ph.D. in Thermo-Fluid and Renewable Energy from the State Yerevan University (Polytechnic), obtained in 2011. Dr. Behiri’s specialization lies within Energy and Renewable energy systems. He is currently an Associate Professor of Mechanical Engineering at Al-Hussein Bin Talal University, Maan, Jordan. Also, Associate Professor of Mechanical Power Engineering at Benha University, Benha, Egypt.
He has previously published more than 40 ISI and Scopus papers. His research interests lie in Combustion, Internal Combustion Engine, Saving Energy in Car, Energy, Renewable Energy Systems, Solar Energy Systems (PV and PV/T systems, Concentrating Solar Energy Systems, Hybrid Solar Systems, Water and air heaters, Environmental Impact, and Solar bonds), Wind Energy systems, Absorption Systems, Thermal Power Systems, and alternative and renewable energy sources.

Akışkan Mekaniği ve Termal Mühendislik (Diğer), Enerji, Yenilenebilir Enerji Sistemleri, İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği
Default avatar
Yrd. Doç. Dr. Sam DAKKA University of Nottingham Web

Sam Dakka is assistant professor with University of Nottingham, with the department of Mechanical, Materials and manufacturing Engineering. he assumed this post on early 2014. he already supervised 2 PhD students and 9 MSc Students and over 80 undergraduate students. DR Dakka expertise is in combustion, advanced propulsion systems and green aviation encompassing aerodynamics and aircraft design and performance.

Aerodinamik (Hipersonik Aerodinamik Hariç), İçten Yanmalı Motorlar, Otomotiv Yanma ve Yakıt Mühendisliği, Hipersonik İtme ve Hipersonik Aerotermodinamik, Uçak Performansı ve Uçuş Kontrol Sistemleri

Language Editor

Öznur Yemez
Dr. Öznur YEMEZ SELÇUK ÜNİVERSİTESİ

Öznur Yemez, PhD, is a literary scholar whose research integrates psychoanalytic criticism, feminist theory, and interdisciplinary humanities to interrogate how literature and film articulate experiences of melancholy, loss, and psychological trauma. Her work is distinguished by its ability to bring neglected texts and marginalised intellectual figures into critical focus, notably reclaiming the contributions of pioneering women such as Sabina Spielrein and Karen Horney. Through rigorous close reading and theoretically informed analysis, Yemez examines the intersections of textual aesthetics, cultural memory, and human interiority, offering fresh insights into both canonical and understudied works. Her publications, appearing in peer-reviewed national and international journals, reflect a commitment to scholarly originality, cross-disciplinary engagement, and intellectual advocacy. Positioned at the nexus of literary studies, psychoanalysis, and gendered historiography, Yemez’s research contributes to a global discourse on how art and narrative shape — and are shaped by — the deepest dimensions of human experience.

İngiliz ve İrlanda Dili, Edebiyatı ve Kültürü, Kuzey Amerika Dilleri, Edebiyatları ve Kültürleri, Türkiye Sahası Yeni Türk Edebiyatı, Film Eleştirisi