Araştırma Makalesi
BibTex RIS Kaynak Göster

Investigation of the Effect of Lubricant on Roughness Transfer with Temper Rolling to DC04 Grade Sheet Materials

Yıl 2020, Cilt: 2 Sayı: 2, 325 - 336, 15.12.2020
https://doi.org/10.47898/ijeased.806736

Öz

In the skin-pass rolling process, which is the last stage of the cold rolling production process, roughness is transferred to the surface of sheet materials with specially roughened rolls. In particular, sheet materials used in the automotive field are required to have a roughness value provided that they are in a standard range and have a homogeneous distribution. Thanks to the roughness value that is homogeneously distributed and meets the standards, the forming ability and paint adhesion of sheet materials are improved. In this study, the effect of lubricant (mineral oil) on roughness transfer by skin-pass rolling to DC04 grade sheet materials, which are used extensively in the automotive and white goods industry, was experimentally investigated. It was concluded that less roughness was transferred under the conditions where the lubricant was used in the experiments conducted with a 500 µm reduction. Also, when 3D area scan images and material ratio curves (MRC) were examined, a more homogeneous roughness profile was obtained compared to dry conditions. It was concluded that the lubricant both reduced the rolling force and caused a decrease in roughness transfer by forming a film layer on the surface, and a homogeneous roughness profile transfer to the material surface.

Proje Numarası

PYO.MUH.1904.19.013

Kaynakça

  • Burdek, M. (2015). The change of work roll surface topography during skin pass rolling of steel sheets. Industrial Lubrication and Tribology, 67(6), 606-611.
  • Çolak, B., and Kurgan, N. (2018). An experimental investigation into roughness transfer in skin-pass rolling of steel strips. The International Journal of Advanced Manufacturing Technology, 96, 3321-3330.
  • Dick, K., and Lenard, J. G. (2005). The effect of roll roughness and lubricant viscosity on the loads on the mill during cold rolling of steel strips. Journal of Materials Processing Technology, 168(1), 16-24.
  • Elkoca, O. (2008). A study on the characteristics of electrical discharge textured skin pass mill work roll. Surface and Coatings Technology, 202(12), 2765-2774.
  • Fujii, Y., Maeda, Y., and Ifuku, R. (2014). Prediction of surface roughness on rolled sheet by texture roll. Procedia Engineering, 81, 161-166.
  • Kijima, H., and Bay, N. (2009). Influence of tool roughness and lubrication on contact conditions in skin-pass rolling. Journal of Materials Processing Technology, 209(10), 4835-4841.
  • Kijima, H. (2013). Influence of roll radius on contact condition and material deformation in skin-pass rolling of steel strip. Journal of Materials Processing Technology, 213(10), 1764-1771.
  • Kijima, H. (2014). Influence of roll radius on roughness transfer in skin-pass rolling of steel strip. Journal of Materials Processing Technology, 214(5), 1111-1119.
  • Kijima, H. (2015a). Influence of lubrication on roughness crushing in skin-pass rolling of steel strip. Journal of Materials Processing Technology, 216, 1-9.
  • Kijima, H. (2015b). An experimental investigation on the influence of lubrication on roughness transfer in skin-pass rolling of steel strip. Journal of Materials Processing Technology, 225, 1-8.
  • Mekicha, M. A., de Rooij, M. B., Jacobs, L., Matthews, D. T. A., and Schipper, D. J. (2020). Experimental validation of contact models for cold-rolling processes. Journal of Materials Processing Technology, 275, 116371.
  • Nagase, N., Shido, S., and Yarita, I. (2009). The Effect of Soluble Lubricant on Surface Imprinting in Temper Rolling by 4 Hi Rolling Mill. ISIJ International, 49(6), 881-889.
  • Özakın, B., and Kurgan, N. (2019). Temper Haddelemede Pürüzlülük Transferini Etkileyen Parametrelerin İncelenmesine Yönelik Bir Derleme Çalışması. International Periodical of Recent Technologies in Applied Engineering, 1(2), 67-78.
  • Wentink, D. J., Matthews, D., Appelman, N. M., and Toose, E. M. (2015). A generic model for surface texture development, wear and roughness transfer in skin pass rolling. Wear, 328, 167-176.
  • Wu, C., Zhang, L., Qu, P., Li, S., and Jiang, Z. (2019). A new method for predicting the three-dimensional surface texture transfer in the skin pass rolling of metal strips. Wear, 426, 1246-1264.
  • Xia, C., Zhang, X., Zhang, J., Li, H., and Jia, S. (2017). Evolution on topography of textured work rolls and steel strips during cold rolling and temper rolling. Steel Research International, 88(9), 1600469.
  • Xin, L. I. U., Yu, W. G., Zhang, Q. F., and Jiang, S. M. (2014). Influence of surface roughness of galvanized steel sheet on self-lubricated coating. Journal of Iron and Steel Research International, 21(3), 342-347.
  • Zhang, S., and Lenard, J. G. (1992). The effects of the reduction, speed and lubricant viscosity on friction in cold rolling. Journal of Materials Processing Technology, 30(2), 197-209.

DC04 Kalite Sac Malzemelere Temper Haddeleme ile Pürüzlülük Transferinde Yağlayıcının Etkisinin İncelenmesi

Yıl 2020, Cilt: 2 Sayı: 2, 325 - 336, 15.12.2020
https://doi.org/10.47898/ijeased.806736

Öz

Soğuk haddeleme üretim sürecinin son aşaması olan temper haddeleme işleminde sac malzemelerin yüzeyine özel pürüzlendirilmiş merdaneler ile pürüzlülük transfer edilir. Özellikle otomotiv alanında kullanılan sac malzemelerin, standart aralıkta ve homojen dağılım göstermesi kaydıyla bir pürüzlülük değerine sahip olması istenir. Homojen dağılan ve standartları karşılayan pürüzlülük değeri sayesinde sac malzemelerin şekillendirme kabiliyeti ve boya yapışma özelliği iyileşmiş olur. Bu çalışmada otomotiv ve beyaz eşya sektöründe yoğun bir şekilde kullanılan şekillendirme kabiliyeti yüksek olan DC04 kalite sac malzemelere temper haddeleme ile pürüzlülük transferinde yağlayıcının etkisi (mineral yağ) deneysel olarak incelenmiştir. 500 µm ezme miktarında yapılan deneylerde yağlayıcı kullanılan şartlarda daha az miktarda pürüzlülük transfer edildiği sonucuna varılmıştır. Ayrıca 3D alan tarama görüntüleri ve malzeme oranı eğrileri (MRC) incelendiğinde kuru şartlara göre daha homojen bir pürüzlülük profili elde edilmiştir. Yağlayıcının hem haddeleme kuvvetini azalttığı ve yüzeyde bir film tabaka oluşturarak pürüzlülük transferinin azalmasına, hem de malzeme yüzeyine homojen bir pürüzlülük profili transferi meydana gelmesine sebep olduğu sonucuna varılmıştır.

Destekleyen Kurum

Ondokuz Mayıs Üniversitesi, TUBİTAK(2211-C)

Proje Numarası

PYO.MUH.1904.19.013

Teşekkür

Yazarlar, Ondokuz Mayıs Üniversitesi PYO. MUH.1904.19.013 proje numarası ve TÜBİTAK “2211-C” tarafından sağlanan destekler ile Karabük Üniversitesi Teknoloji Fakültesinin laboratuvar destekleri ve ERDEMİR T.A.Ş’nin malzeme bağışları için teşekkür ederler.

Kaynakça

  • Burdek, M. (2015). The change of work roll surface topography during skin pass rolling of steel sheets. Industrial Lubrication and Tribology, 67(6), 606-611.
  • Çolak, B., and Kurgan, N. (2018). An experimental investigation into roughness transfer in skin-pass rolling of steel strips. The International Journal of Advanced Manufacturing Technology, 96, 3321-3330.
  • Dick, K., and Lenard, J. G. (2005). The effect of roll roughness and lubricant viscosity on the loads on the mill during cold rolling of steel strips. Journal of Materials Processing Technology, 168(1), 16-24.
  • Elkoca, O. (2008). A study on the characteristics of electrical discharge textured skin pass mill work roll. Surface and Coatings Technology, 202(12), 2765-2774.
  • Fujii, Y., Maeda, Y., and Ifuku, R. (2014). Prediction of surface roughness on rolled sheet by texture roll. Procedia Engineering, 81, 161-166.
  • Kijima, H., and Bay, N. (2009). Influence of tool roughness and lubrication on contact conditions in skin-pass rolling. Journal of Materials Processing Technology, 209(10), 4835-4841.
  • Kijima, H. (2013). Influence of roll radius on contact condition and material deformation in skin-pass rolling of steel strip. Journal of Materials Processing Technology, 213(10), 1764-1771.
  • Kijima, H. (2014). Influence of roll radius on roughness transfer in skin-pass rolling of steel strip. Journal of Materials Processing Technology, 214(5), 1111-1119.
  • Kijima, H. (2015a). Influence of lubrication on roughness crushing in skin-pass rolling of steel strip. Journal of Materials Processing Technology, 216, 1-9.
  • Kijima, H. (2015b). An experimental investigation on the influence of lubrication on roughness transfer in skin-pass rolling of steel strip. Journal of Materials Processing Technology, 225, 1-8.
  • Mekicha, M. A., de Rooij, M. B., Jacobs, L., Matthews, D. T. A., and Schipper, D. J. (2020). Experimental validation of contact models for cold-rolling processes. Journal of Materials Processing Technology, 275, 116371.
  • Nagase, N., Shido, S., and Yarita, I. (2009). The Effect of Soluble Lubricant on Surface Imprinting in Temper Rolling by 4 Hi Rolling Mill. ISIJ International, 49(6), 881-889.
  • Özakın, B., and Kurgan, N. (2019). Temper Haddelemede Pürüzlülük Transferini Etkileyen Parametrelerin İncelenmesine Yönelik Bir Derleme Çalışması. International Periodical of Recent Technologies in Applied Engineering, 1(2), 67-78.
  • Wentink, D. J., Matthews, D., Appelman, N. M., and Toose, E. M. (2015). A generic model for surface texture development, wear and roughness transfer in skin pass rolling. Wear, 328, 167-176.
  • Wu, C., Zhang, L., Qu, P., Li, S., and Jiang, Z. (2019). A new method for predicting the three-dimensional surface texture transfer in the skin pass rolling of metal strips. Wear, 426, 1246-1264.
  • Xia, C., Zhang, X., Zhang, J., Li, H., and Jia, S. (2017). Evolution on topography of textured work rolls and steel strips during cold rolling and temper rolling. Steel Research International, 88(9), 1600469.
  • Xin, L. I. U., Yu, W. G., Zhang, Q. F., and Jiang, S. M. (2014). Influence of surface roughness of galvanized steel sheet on self-lubricated coating. Journal of Iron and Steel Research International, 21(3), 342-347.
  • Zhang, S., and Lenard, J. G. (1992). The effects of the reduction, speed and lubricant viscosity on friction in cold rolling. Journal of Materials Processing Technology, 30(2), 197-209.
Toplam 18 adet kaynakça vardır.

Ayrıntılar

Birincil Dil Türkçe
Konular Makine Mühendisliği, Üretim ve Endüstri Mühendisliği
Bölüm Makaleler / Articles
Yazarlar

Batuhan Özakın 0000-0003-1754-949X

Naci Kurgan 0000-0001-7297-7249

Proje Numarası PYO.MUH.1904.19.013
Yayımlanma Tarihi 15 Aralık 2020
Gönderilme Tarihi 6 Ekim 2020
Yayımlandığı Sayı Yıl 2020 Cilt: 2 Sayı: 2

Kaynak Göster

APA Özakın, B., & Kurgan, N. (2020). DC04 Kalite Sac Malzemelere Temper Haddeleme ile Pürüzlülük Transferinde Yağlayıcının Etkisinin İncelenmesi. Uluslararası Doğu Anadolu Fen Mühendislik Ve Tasarım Dergisi, 2(2), 325-336. https://doi.org/10.47898/ijeased.806736