PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES

Hayati Mamur

EN

PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES

Öz

The aim of this paper is to compare the performance evaluation in terms of the efficiency, cogging torque and manufacturing cost for a permanent magnet synchronous generator (PMSG) with interior rotor of N35 and N42 NdFeB permanent magnets (PMs) having same geometry separately used in a micro wind turbine (MWT). Firstly N35 type PMs have been used on an interior rotor, and then its performance has been measured and calculated by a MWT setup. After that, N42 type PMs have been used on other interior rotor. According to the obtained results, the PMSG with N42 type presented better efficiency than the PMSG with N35 type. But the PMSG with N42 type has induced a bit more cogging torque than the PMSG with N35 type. When comparing in terms of efficiency, a higher efficiency has been obtained by the PMSG with N42 type.

Anahtar Kelimeler

PMSG, PM, efficiency, NdFeB, N42, N35

Ayrıntılar

Birincil Dil

İngilizce

Konular

-

Bölüm

-

Yazarlar

Hayati Mamur Bu kişi benim

Yayımlanma Tarihi

1 Aralık 2016

Gönderilme Tarihi

1 Aralık 2016

Kabul Tarihi

-

Yayımlandığı Sayı

Yıl 2016 Cilt: 3 Sayı: 2

IZ

https://izlik.org/JA62FM39SG

Kaynak Göster

RIS / Bibtex

APA

Mamur, H. (2016). PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES. International Journal of Energy Applications and Technologies, 3(2), 50-54. https://izlik.org/JA62FM39SG

AMA

1.Mamur H. PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES. International Journal of Energy Applications and Technologies. 2016;3(2):50-54. https://izlik.org/JA62FM39SG

Chicago

Mamur, Hayati. 2016. “PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES”. International Journal of Energy Applications and Technologies 3 (2): 50-54. https://izlik.org/JA62FM39SG.

EndNote

Mamur H (01 Aralık 2016) PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES. International Journal of Energy Applications and Technologies 3 2 50–54.

IEEE

[1]H. Mamur, “PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES”, International Journal of Energy Applications and Technologies, c. 3, sy 2, ss. 50–54, Ara. 2016, [çevrimiçi]. Erişim adresi: https://izlik.org/JA62FM39SG

ISNAD

Mamur, Hayati. “PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES”. International Journal of Energy Applications and Technologies 3/2 (01 Aralık 2016): 50-54. https://izlik.org/JA62FM39SG.

JAMA

1.Mamur H. PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES. International Journal of Energy Applications and Technologies. 2016;3:50–54.

MLA

Mamur, Hayati. “PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES”. International Journal of Energy Applications and Technologies, c. 3, sy 2, Aralık 2016, ss. 50-54, https://izlik.org/JA62FM39SG.

Vancouver

1.Hayati Mamur. PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES. International Journal of Energy Applications and Technologies [Internet]. 01 Aralık 2016;3(2):50-4. Erişim adresi: https://izlik.org/JA62FM39SG