Thermodynamic analysis of an ejector cooling system using R123 as refrigerant under different working conditions

Yıl 2018, , 61 - 67, 20.10.2018

Dilek Nur Özen , Muhammed Emin Tolu Uğur Köklü

https://doi.org/10.31593/ijeat.427229

Öz

Meeting the energy demand and reducing high energy costs are becoming more and more essential for mankind. Concordantly, increasing scientific studies are trying to provide new techniques and solutions every day. In the area of refrigeration technology, which is the cause of a considerable part of the energy consumption, very significant studies are being done to increase energy efficiency. Ejector cooling technology, which is supposed to be able to replace conventional cooling systems, is an area of research that attracts the attention of researchers and that various researches are being carried out on them. In this study, theoretical performance analysis of an ejector cooling system that is using R123 as refrigerant and designed according to the constant area model has done. In the cooling system, the ejector is considered as the substitute of the compressor. The theoretical analysis of the system was carried out by using a computer program which is being used for modelling and simulation. All the data belong to the thermodynamic properties of R123 refrigerant were processed to the program. By using this data in the prepared program, it is possible to simulate desired values according to different situations and conditions. Thus, the effects of using R123 refrigerant on the coefficient of performance (COP) of the cooling system under various operating conditions are examined and the findings are presented in graphs.

Anahtar Kelimeler

Ejector, COP, Entrainment ratio, Temperature, Simulation, Cooling

Kaynakça

• [1] Carrillo, J. E., de La Flor, F. S., & Lissén, J. S., 2017, “Thermodynamic comparison of ejector cooling cycles. Ejector characterisation by means of entrainment ratio and compression efficiency”, International Journal of Refrigeration, 74, 371-384.
• [2] Yapıcı, R., & Ersoy, H. K., 2005, “Performance characteristics of the ejector refrigeration system based on the constant area ejector flow model”, Energy conversion and management, 46(18-19), 3117-3135.
• [3] Chen, X., Omer, S., Worall, M., & Riffat, S., 2013, “Recent developments in ejector refrigeration technologies”, Renewable and Sustainable Energy Reviews, 19, 629-651.
• [4] Yilmaz, F., Selbaş, R., & Üçgül, İ., 2014, “Ejektörlü Soğutma Sisteminin Teorik Olarak İncelenmesi”, SDÜ Yekarum e-Dergi, 2(2).
• [5] Yang, X., & Zhao, L., 2015, “Thermodynamic analysis of a combined power and ejector refrigeration cycle using zeotropic mixtures”, Energy Procedia, 75, 1033-1036.
• [6] Besagni, G., Mereu, R., & Inzoli, F., 2016, “Ejector refrigeration: a comprehensive review”, Renewable and Sustainable Energy Reviews, 53, 373-407.
• [7] Özen, D.N., Tolu, M.E., 2016, “Theoretical analysis of a cooling system with an ejector for different refrigerants,” in IEESE8, p. 1198-1202.
• [8] Ma, Z., Bao, H., & Roskilly, A. P., 2017, “Thermodynamic modelling and parameter determination of ejector for ejection refrigeration systems”, International Journal of Refrigeration, 75, 117-128.
• [9] Yapıcı, R., Ersoy, H. K., Aktoprakoğlu, A., Halkacı, H. S., & Yiğit, O., 2008, “Experimental determination of the optimum performance of ejector refrigeration system depending on ejector area ratio”, International Journal of Refrigeration, 31(7), 1183-1189.
• [10] Chen, J., Jarall, S., Havtun, H., & Palm, B., 2015, “A review on versatile ejector applications in refrigeration systems”, Renewable and Sustainable Energy Reviews, 49, 67-90.