Experimental investigation of heat transfer in aluminum wings with NACA 4040 profile

Öz

Heat transfer is a working area where different numerical results are obtained from different materials, different environments, independent observations are made, data can be collected at different bases based on the abundance of data input. effects on heat transfer. The effects of air flow, air temperature and air pressure on heat transfer were discussed. Unlike the previous studies, the construction of the fin is made of aluminum and the choice of the NACA 4040 wing profile as the shape of the fin was one of the major factors in the differences in the test output. Since the results obtained from the experiments included many products or development factors in the application and production areas that are important, the fact that this study was carried out with aluminum material and the results of the experiments in this direction became a factor increasing the circulation in these processes. In our studies, one type of fin was used.

Anahtar Kelimeler

• Convection heat transfer
• Heat exchanger
• Winglet surfaces
• naca 4040profile

Kaynakça

1. Çengel, Y. Isı ve Kütle Transferi. G. Kitabevi (Ed.). İzmir. 2014.
2. Darıcı, S. 1998. Borularda Akış Tıkanmasının Türbülanslı Isı Transferine Etkileri. Içinde Selçuk Üniversitesi Makina Anabilim Dalı , Yüksek Lisans Tezi. Konya.
3. Sara, O. N. 2001. Heat Transfer Enhancement in a Channel Flow with Perforated Rectangular Blocks. International Journal of Heat and Fuid Flow.
4. Berber, A, Bağırsakçı, K, Gürdal, M. 2020. Investigation of Effects on Heat Transfer and Flow Characteristics of Cr-Ni Alloy and Aluminum Pins Placed in AISI 304 Tube, Thermal Science. 24(3), 1999-2011.
5. Berber, A, Bağırsakçı, K, Gürdal, M. 2021. Prediction of Heat Transfer in a Circular Tube with Aluminium and Cr-Ni Alloy Pins Using Artificial Neural Network. Experimental Heat Transfer, 34(6), 547-563.
6. Altun, A. H., Gurdal, M., Berber, A. 2019. The Effects of Sinusoidal Strip Element with Different Amplitudes on Heat Transfer and Flow Characteristics of Circular Channels. Heat Transfer Research, 50(6), 605-616.
7. Altun, A. H., Gurdal, M., Berber, A. 2020. Effects of sinusoidal turbulator in cylindrical channel on heat transfer and flow characteristics. Maejo International Journal of Science and Technology Maejo Int. J. Sci. Technol., 14(01), 27-42.
8. Berber, A, Gürdal, M., Yetimoğlu, M. 2021. Experimental Study on the Heat Transfer Enhancement in a Rectangular Channel with Curved Winglets. Experimental Heat Transfer, 1-21, in-press.

9. Wang, C. et al. 2002. Forced Convection in a Wavy Wall Channel. International Journal of Heat and Mass Transfer. 45(12), 2587-2595.
10. Akyol, U. et al.2006. Heat Transfer and Thermal Performance of a Surface with Hollow Rectangular Fins. Applied Thermal Engineer, 26(2), 209-216.
11. Bilen, K. et al.2009. The Investigation of Grrove Geometry Effect on Heat Transfer for Internally Grooved Tubes. Applied Thermal Engineer, 29(4), 753-761.
12. Sewall, E. A. et al.2006. Experimental Validation of Large Eddy Simulations of Flow and Heat Transfer in a Stationary Ribbed Duet. International Journal of Heat and Fuid Flow, 27, 243-258.
13. Tijing, L. et al.2006. A Study on Heat Transfer Enhancement Using Straigt and Twisted Internal Fin Insert. International Communications in Heat and Mass Transfer, 33, 719-726.
14. Yakut, K. et al.2006. Optimum design Parameters of a Heat Exchanger Having Hexagonal Fins. Applied Energy, 83(2), 82-98.
15. Didarul, M. et al.2007. Study on Heat Transfer and Fluid Flow Characteristics with Short Rectangular Plate Fin of Different Pattern. Experimental Thermal and Fluid Science, 31(4), 367-379.
16. Hiravennar, S. et al.2007. A Note on the Flow and Heat Transfer Enhancement in a Channel with Built in Winglet Pair. International Journal of Heat and Fuid Flow, 28(2), 299-305.
17. Khalled, A. et al.2007. Heat Transfer Enhancement in Hairy Fin System. Applied Thermal Engineer, 27(1):250-257.
18. Aharwal, K. et al.2008. Experimental Investigatıon on Heat Transfer Enhancement Due to Gap in an Inclined Continuous Rip Arrangement in a Rectangular Duct of Solar Air Heater. Renewable Energy, 33, 585-596.
19. Şahin, B. et al.2008. Performance Analysis of a Heat Exchanger Having Perforated Square Fins. Applied Thermal Engineer, 28(5-6), 621-632.
20. Shaeri, M. et al. 2009. Numerical Analysis of Turbulent Convection Heat Transfer From an Array of Perforated Fins. International Journal of Heat and Fuid Flow, 30(2), 218-228.
21. Güneş, S. 2009. Çeşitli İç Elemanlar Yerleştirilmiş Bir Boruda Isı Geçişinin İncelenmesi. Makina Mühendisliği Anabilimdalı Doktora Tezi , Erciyes Üniversitesi. Kayseri.
22. Zhang, J., Zhao, Y., Diao, Y., Zhang, Y. 2015. An experimental study on fluid flow and heat transfer in a multiport minichannel flat tube with micro-fin structures. International Journal of Heat and Mass Transfer, 84, 511–520.
23. Eren, M., Caliskan, S. 2016. Effect of grooved pin-fins in a rectangular channel on heat transfer augmentation and friction factor using Taguchi method. International Journal of Heat and Mass Transfer, 102, 1108–1122.
24. Yang, A., Chen, L., Xie, Z., Feng, H., Sun, F. 2016. Constructal heat transfer rate maximization for cylindrical pin-fin heat sinks. Applied Thermal Engineering, 108, 427–435.
25. Badescu, V. 2017. Smooth and non-smooth optimal pin fin profiles beyond the Schmidt optimality assumption and “length-of-arc” approximation, Applied Mathematical Modelling, 47, 358-380.