BibTex RIS Kaynak Göster

PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES

Yıl 2016, Cilt: 3 Sayı: 2, 50 - 54, 01.12.2016

Hayati Mamur

Öz

The aim of this paper is to compare the performance evaluation in terms of the efficiency, cogging torque and manufacturing cost for a permanent magnet synchronous generator (PMSG) with interior rotor of N35 and N42 NdFeB permanent magnets (PMs) having same geometry separately used in a micro wind turbine (MWT). Firstly N35 type PMs have been used on an interior rotor, and then its performance has been measured and calculated by a MWT setup. After that, N42 type PMs have been used on other interior rotor. According to the obtained results, the PMSG with N42 type presented better efficiency than the PMSG with N35 type. But the PMSG with N42 type has induced a bit more cogging torque than the PMSG with N35 type. When comparing in terms of efficiency, a higher efficiency has been obtained by the PMSG with N42 type.

Anahtar Kelimeler

PMSG PM efficiency NdFeB N42 N35

Yıl 2016, Cilt: 3 Sayı: 2, 50 - 54, 01.12.2016

Hayati Mamur

Öz

Toplam 0 adet kaynakça vardır.

Ayrıntılar

Diğer ID JA43SC32UG
Bölüm Araştıma
Yazarlar

Hayati Mamur Bu kişi benim

Yayımlanma Tarihi 1 Aralık 2016
Gönderilme Tarihi 1 Aralık 2016
Yayımlandığı Sayı Yıl 2016 Cilt: 3 Sayı: 2

Kaynak Göster

APA Mamur, H. (2016). PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES. International Journal of Energy Applications and Technologies, 3(2), 50-54.
AMA Mamur H. PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES. IJEAT. Aralık 2016;3(2):50-54.
Chicago Mamur, Hayati. “PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES”. International Journal of Energy Applications and Technologies 3, sy. 2 (Aralık 2016): 50-54.
EndNote Mamur H (01 Aralık 2016) PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES. International Journal of Energy Applications and Technologies 3 2 50–54.
IEEE H. Mamur, “PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES”, IJEAT, c. 3, sy. 2, ss. 50–54, 2016.
ISNAD Mamur, Hayati. “PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES”. International Journal of Energy Applications and Technologies 3/2 (Aralık 2016), 50-54.
JAMA Mamur H. PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES. IJEAT. 2016;3:50–54.
MLA Mamur, Hayati. “PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES”. International Journal of Energy Applications and Technologies, c. 3, sy. 2, 2016, ss. 50-54.
Vancouver Mamur H. PERFORMANCE EVALUATION FOR A PMSG WITH INTERIOR ROTOR OF N35 AND N42 NDFEB PMs HAVING SAME GEOMETRY IN MICRO WIND TURBINES. IJEAT. 2016;3(2):50-4.