Energy and Exergy Analysis of an Organic Rankine Cycle Using Different Working Fluids from Waste Heat Recovery

Yıl 2017, Cilt: 1 Sayı: 1, 32 - 45, 27.12.2017

Esra Özdemir Muhsin Kılıç

Öz

In this study, the energy and
exergy analysis of organic Rankine cycle is performed for different dry working
fluids which are R600a, R600, R245fa, R123 and R113. The organic Rankine
cycle's performance parameters are evaluated depending on varied evaporation
temperatures and the inlet temperatures of the waste hot fluid. Results show that the best performance results are obtained for R600a considering the
thermal efficiency, exergy efficiency, net power and lower total
irreversibility at the evaluations of
both the increment of the evaporation temperature and the increment of the
inlet temperature of waste hot fluid.

Anahtar Kelimeler

Energy, exergy, organic Rankine cycle, working fluid

Kaynakça

• [1] B.F. Tchanche, G. Lambrinos, A. Frangoudakis, G. Papadakis, "Low-grade heat conversion into power using organic Rankine cycles-A review of various applications," Renewable and Sustainable Energy Reviews, vol. 15, pp. 3963–79, 2011. [2] E. Wali, "Optimum working fluids for solar powered Rankine cycle cooling of buildings," Solar Energy, vol. 25, pp. 235–241, 1980. [3] J.P. Roy, M.K. Mishra, A. Misra, "Performance analysis of an organic Rankine cycle with superheating under different heat source temperature conditions," Applied Energy, vol. 88, pp. 2995–3004, 2011. [4] B.-T. Liu, K.-H. Chien, C.-C. Wang, "Effect of working fluids on organic Rankine cycle for waste heat recovery," Energy, vol. 29 (8), pp. 1207−1217, 2004. [5] Y. Chen, P. Lundqvist, A. Johansson, P.A. Platell, "Comparative study of the carbon dioxide transcritical power cycle compared with an organic Rankine cycle with R123 as working fluid in waste heat recovery," Applied Thermal Engineering, vol. 26, pp. 2142–2147, 2006. [6] M. Kanoglu, A. Bolatturk, "Performance and parametric investigation of a binary geothermal power plant by exergy," Renewable Energy, vol. 33, pp. 2366–2374, 2008. [7] H. Gao, C. Liu, C. He, X. Xu, S. Wu, Y. Li, "Performance analysis and working fluid selection of a supercritical organic rankine cycle for low grade waste heat recovery," Energies, vol. 5, pp. 3233–3247, 2012. [8] D. Wang, X. Ling, H. Peng, "Performance analysis of double organic Rankine cycle for discontinuous low temperature waste heat recovery," Applied Thermal Engineering, vol. 48, pp. 63–71, 2012. [9] Z.Q. Wang, N.J. Zhou, J. Guo, X.Y. Wang, "Fluid selection and parametric optimization of organic Rankine cycle using low temperature waste heat," Energy, vol. 40, pp. 107–115, 2012. [10] O. Kaska, "Energy and exergy analysis of an organic Rankine for power generation from waste heat recovery in steel industry," Energy Conversion and Management, vol. 77, pp. 108-117, 2014. [11] M. Imran, B. Park, H. Kim, D. Lee, M. Usman, M. Heo, "Thermo-economic optimization of regenerative organic Rankine cycle for waste heat recovery applications," Energy Conversion and Management, vol. 87, pp. 107-118, 2014. [12] Q. Zhu, Z. Sun, J. Zhou, "Performance analysis of organic Rankine cycles using different working fluids," Thermal Science, vol. 19, pp. 179-191, 2015. [13] http://www.coolprop.org/fluid_properties/PurePseudoPure.html#thermodynamic-properties-of-fluid, (Date accessed: 28.05.2017) [14] B.-T. Liu, K.-H. Chien, C.-C. Wang, "Effect of working fluids on organic Rankine cycle for waste heat recovery," Energy, vol. 29 (8), pp. 1207−1217, 2004.