Stir Casting of SiC Reinforced Aluminum Composites From Waste Aluminum

Yıl 2019, Cilt: 3 Sayı: 1, 31 - 33, 04.03.2019

Mevlüt Gürbüz , Bilgehan Cem Turan Özgür Yılmaz

Öz

Aluminum and its alloys are widely used in automotive,
aviation, defense industries because of its low density, process ability, high
strength. Aluminum matrix composites are usually manufactured by powder
metallurgy or liquid methods. As a liquid processing method, stir casting
method is a cheaper and easier method than powder metallurgy. When waste
beverage cans are recycled and used as matrix material for manufacturing
composite material, cost of process is reduced and also environmental pollution
is reduced.  In this study, silicon carbide (SiC)
reinforced aluminum matrix composites have been manufactured. From the
manufactured composites specimens have been prepared and hardness, density,
compressive, tensile, tests; XRD and SEM analyses have been applied. From the
obtained results with the reinforcement of SiC, hardness value has been
increased from 70.1 HV to 89.90 HV. Also, from SEM analyses it is observed that
SiC particles have been dispersed homogeneously.

Anahtar Kelimeler

Composite, SiC, aluminum, mechanical property, scanning electron microscope

Kaynakça

• [1] M.Gürbüz, M.C. Şenel, E.Koç, “The effect of sintering time, temperature, and graphene addition on the hardness and microstructure of aluminum composites”, Journal of Composite Materials, 54(4), 553-563, (2018).
• [2] M. Gürbüz, T. Mutuk, “Effect of process parameters on hardness and microstructure of graphene reinforced titanium composites”, Journal of Composite Materials, 52(4), 543-551, (2018).
• [3] B. Öztop, M. Gürbüz, “Atık Alüminyumdan Elde Edilen Matrise Grafen Takviyesiyle Üretilen Kompozitlerin Özelliklerinin İncelenmesi”, International Journal of Multidisciplinary Studies and Innovative Technologies, 1(1), 4-8, (2017]
• [4] B. Öztop, M. Gürbüz, “Sİ3N4 Takviyesiyle Atık Alüminyumdan Üretilmiş Kompozitlerin Özelliklerinin İncelenmesi”, Technological Applied Sciences, 13(1), 57-66, (2018)