Araştırma Makalesi

Implementing the Streamline Curvature Method For Preliminary Design of Multi-Stage Axial Compressors

Cilt: 2 Sayı: 2 27 Eylül 2024
PDF İndir
EN

Implementing the Streamline Curvature Method For Preliminary Design of Multi-Stage Axial Compressors

Abstract

The article describes an algorithm for the inverse calculation of a multi-stage axial compressor using the streamline curvature method. Also, using this method, a four-stage axial compressor with a pressure ratio of 3.2 was designed. In addition, a numerical simulation of the flow in this compressor was performed, the results of the numerical simulation were compared with the design parameters, and an analysis of the reasons for the deviation of the parameters from the design parameters was performed. Recommendations for improving the calculation methodology are given.

Keywords

Kaynakça

  1. Tao, L., Yadong, W., & Hua, O. (2020). Performance Prediction of Transonic Axial Compressors Using Improved Streamline Curvature Approach. Fluid Dynamics, 55(1), 121–132.
  2. Jansen, W., & Moffatt, W. C. (1967). The off-design analysis of axial-flow compressors.
  3. Aungier, R. H. (2003). Axial-flow compressors. American Society of Mechanical Engineers, New York.
  4. Cumpsty, N. A. (1989). Compressor aerodynamics. Longman Scientific & Technical.
  5. Banjac, Milan & Petrovic, Milan. (2018). Development of Method and Computer Program for Multistage Axial Compressor Design: Part II — Two-Dimensional Design and Validation Using CFD. V02CT42A008. 10.1115/GT2018-75412.
  6. Lieblein, S., 1959. “Loss and Stall Analysis of Compressor Cascades”. ASME Journal of Basic Engineering, 81, pp. 387–400.
  7. Schobeiri, M. (2005). Turbomachinery flow physics and dynamic performance (p. 153). Berlin: Springer. [8] Bogdonoff, S. M. (1948). NACA Cascade Data for the Blade Design of High-Performance Axial-Flow Compressors. Journal of the Aeronautical Sciences, 15(2), 89-95.
  8. ANSYS, 2010. ANSYS CFX-Solver Theory Guide. ANSYS Inc, Canonsburg.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Makine Mühendisliği (Diğer)

Bölüm

Araştırma Makalesi

Yazarlar

Yayımlanma Tarihi

27 Eylül 2024

Gönderilme Tarihi

11 Haziran 2024

Kabul Tarihi

28 Haziran 2024

Yayımlandığı Sayı

Yıl 2024 Cilt: 2 Sayı: 2

Kaynak Göster

IEEE
[1]H. Genceli ve R. Mukhamediarov, “Implementing the Streamline Curvature Method For Preliminary Design of Multi-Stage Axial Compressors”, IJONFEST, c. 2, sy 2, ss. 106–120, Eyl. 2024, doi: 10.61150/ijonfest.2024020204.

download?token=eyJhdXRoX3JvbGVzIjpbXSwiZW5kcG9pbnQiOiJqb3VybmFsIiwib3JpZ2luYWxuYW1lIjoiYnkucG5nIiwicGF0aCI6IjU1NWYvMDkxOC85OWRjLzY5Y2ZhYjE1MWYyZTkxLjkwMzI5NTI0LnBuZyIsImV4cCI6MTc3NTIyMTAyOSwibm9uY2UiOiI4YmJhZjIyODE1M2U4MWQ2NWJkZDhkZjVjNzlhODI4MSJ9.H6Q7Nn3VeIK8JVb8uxmHB8VC2nvozW8IrZnyVkXfS3Q

International Journal of New Findings in Engineering, Science and Technology (IJONFEST) is published under the Creative Commons Attribution 4.0 International License (CC BY 4.0). This license allows unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.