ORTOGNATİK MANDİBULA OSTEOTOMİSİNDE YENİ BİR EĞİTİM SEÇENEĞİ: HAVA KURUTMALI KİL MODELİ

Yıl 2021, Cilt: 84 Sayı: 4, 482 - 487, 01.10.2021

Erol Kozanoğlu , Bora Edim Akalın Ömer Berköz , Soner Karaali Nermin Mammadova Erman Ak Ahmet Faruk Yücel Ufuk Emekli

https://doi.org/10.26650/IUITFD.2021.836789

Öz

Amaç: Hasta güvenliği ve düşük komplikasyon oranları cerrahi eğitimde olmazsa olmazdır ve modeller temel eğitim yöntemleri arasındadır. Bu çalışmanın amacı, ortognatik mandibula osteotomisinde yeni bir modelin etkinliğini değerlendirmektir. Gereç ve Yöntemler: Hava kurutmalı kilden bir şablon ve 17 kısmi mandibula modeli (MM-17) üretildi. Modellerin boyutları sagittal split ramus osteotomisine (SSRO) uygundu. Model cerrahisi ortognatik cerrahide en az üç yıllık deneyimi olan dört cerrah tarafından yapıldı. Her cerrah dört ayrı modelde çalıştı ve şu değerler kaydedildi: kortikotomi ve SSRO tamamlanma süresi, MM-17 kırığı ve türü, MM-17’nin mandibula ile benzerlik değeri, temsil değeri ve eğitim uygunluk değeri. Bulgular: Maliyet 0,6 Amerikan Doları’ydı. Ortalama kortikotomi süresi 127,75 saniyeydi (110-150). Ortalama korteks direnç benzerliği değeri 8,75’ti (8-10). Ortalama SSRO süresi 288 saniyeydi (205-401). Kırıkların yüzde altmışı dış korteksteydi. Ortalama medulla direnç benzerlik değeri 5 (4-6) ve ortalama mandibula temsil değeri 5,25’ti (4-7). Eğitim uygunluk değeri 8,25’ti (7-10). Sonuç: Hava kurutmalı kil, kemik korteksi ile mekanik benzerlikler göstermektedir ve mandibula modeli üretiminde ilk kez kullanılmıştır. Ayrıca, MM-17 diğer modellerden daha ucuzdur. Kortikotomi ve SSRO tamamlanma süreleri kısadır. Çünkü disseksiyon ve kanama gibi hastaya bağlı etkenler yoktur. SSRO’daki yetersizliklerine rağmen MM-17 ortognatik mandibular kortikotomi eğitiminde çok kullanışlı ve düşük maliyetli bir seçenektir. Yüksek devirli motor kullanımı becerileri klinik uygulama öncesi MM-17 ile edinilebilir.

Anahtar Kelimeler

Eğitim, hava kurutmalı kil, mandibula, model cerrahisi, ortognatik cerrahi

A NOVEL TRAINING ALTERNATIVE IN ORTHOGNATHIC MANDIBULAR OSTEOTOMY: AIR DRIED CLAY MODEL

Öz

Objective: Patient safety and low complication rates are indispensable in surgical training and models are among the main educational tools. The aim of this study is to assess the efficiency of a novel model for orthognathic mandibular osteotomy. Material and Methods: A template and seventeen partial mandibular models (MM-17) were manufactured with air dried clay. The dimensions of the models were feasible for sagittal split ramus osteotomy (SSRO). Model surgery was performed by surgeons with a minimum of three years’ experience in orthognathic surgery. Each surgeon operated four separate models and the following data were recorded: corticotomy and SSRO completion time, MM-17 fracture type, similarity value of MM-17 with native mandible, representation value of MM-17, and the training compatibility value of MM-17. Results: The cost was 0.6 American Dollars. The mean corticotomy time was 126.75 seconds (110-150). Mean cortical resistance similarity value was 8.75 (8-10). The mean SSRO time was 288 seconds (205-401). Sixty percent of the fractures were seen in the outer cortex. The mean medullary resistance similarity value was 5 (4-6) and mean mandibular representation value was 5.25 (4-7). The training compatibility value was 8.25 (7-10). Conclusion: Air dried clay demonstrated mechanical similarities with bone cortex and it was used for mandibular modelling for the first time. MM-17 cost less than other devices. Corticotomy and SSRO completion times were short due to the lack of dissection and bleeding. Despite its drawbacks in SSRO, MM-17 is a versatile and low cost alternative in orthognathic mandibular corticotomy training. High power drill utilization skills may be gained with MM-17 before clinical practice.

Anahtar Kelimeler

Air-dried clay, mandible, model surgery, orthognathic surgery, training

Kaynakça

• 1. Reyneke JP, Ferretti C. The bilateral sagittal split mandibular ramus osteotomy. Atlas of the oral and maxillofacial surgery clinics of North America 2016;24(1):27-36. [CrossRef]
• 2. Reyneke J. In essential in orthognathic surgery [Chapter 4]. Chicago: Quintessence 2003:171-5.
• 3. Obwegeser H. Zur Operationstechnik bei der progenie und anderer unterkieferanomalien. Dtsch, Z Mund Kieferheilk 1955;23:1-26.
• 4. Hunsuck E. A modified intraoral sagittal splitting technique for correction of mandibular prognathism. J Oral Surg 1968;26:249-52.
• 5. Epker BN. Modifications in the sagittal osteotomy of the mandible. J Oral Surg 1977;35(2):157-9.
• 6. Yuce E, Komerik N. Oral maxillofacial training: opinions of trainees and specialists in Turkey. Journal of Contemporary Medi cal Education 2015;3(1):25-30. [CrossRef]
• 7. Lutz JC, Hostettler A, Agnus V, Nicolau S, George D, Soler L, et al. A new software suite in orthognathic surgery: patient specific modeling, simulation and navigation. Surgical innovation 2019;26(1):5-20. [CrossRef]
• 8. Chen X, Hu J. A review of haptic simulator for oral and maxillofacial surgery based on virtual reality. Expert Review of Medical Devices 2018;15(6):435-44. [CrossRef]
• 9. Website AB. [cited 2019 14.05]. Available from: http:// argilesbisbal.com/en/portfolio/hardpast/
• 10. Mehra P, Castro V, Freitas RZ, Wolford LM. Complications of the mandibular sagittal split ramus osteotomy associated with the presence or absence of third molars. Journal of oral and maxillofacial surgery 2001;59(8):854-8. [CrossRef]
• 11. Palter VN, Grantcharov T, Harvey A, MacRae HM. Ex vivo technical skills training transfers to the operating room and enhances cognitive learning: a randomized controlled trial. Annals of surgery 2011;253(5):886-9. [CrossRef]
• 12. Ureturk EU, Apaydin A. Does fixation method affect temporomandibular joints after mandibular advancement? Journal of Cranio-Maxillofacial Surgery 2018;46(6):923-31. [CrossRef]
• 13. Sohmura T, Hojo H, Nakajima M, Wakabayashi K, Nagao M, Iida S, et al. Prototype of simulation of orthognathic surgery using a virtual reality haptic device. International journal of oral and maxillofacial surgery 2004;33(8):740-50. [CrossRef]
• 14. Maliha SG, Diaz-Siso JR, Plana NM, Torroni A, Flores RL. Haptic, physical, and web-based simulators: Are they underused in maxillofacial surgery training? Journal of Oral and Maxillofacial Surgery. 2018;76(11):2424 e1-. e11. [CrossRef]
• 15. Baccarin L, Casarin RCV, Lopes-da-Silva J, Passeri L. Analysis of mandibular test specimens used to assess a bone fixation system. Craniomaxillofacial trauma&reconstruction 2015;8(3):171-8. [CrossRef]
• 16. Kazum E, Dolkart O, Rosenthal Y, Sherman H, Amar E, Salai M, et al. A simple and low-cost drilling simulator for training plunging distance among orthopedic surgery residents. Journal of surgical education 2019;76(1):281-5. [CrossRef]