Araştırma Makalesi

Güneş Fırınlarında Yapı Malzemesi Seçimi ve Tasarım Stilinin Fırın Isıl Özelliklerine Etkisinin İncelenmesi

Cilt: 5 Sayı: 5 31 Aralık 2020
PDF İndir
EN TR

Investigation Of The Effect Of Building Material Selection and Design Style On Kiln Thermal Properties In Solar Kilns

Abstract

The negative effects of intensive energy consumption in timber drying on costs and environmental pollution have strengthened the tendency to utilize solar energy in recent years. Although drying of timber in flat collector solar furnaces takes more time than conventional drying, energy costs are low and there are no negative environmental effects. In this study, the selection of building materials and design type to be used in the design of solar furnaces was evaluated in terms of thermal properties. Materials with different thermal capacities create different thermal properties in different designs. Therefore, it is possible to control the course of the temperature distribution in the solar timber drying oven throughout the day with the choice of different building materials and design forms.

Keywords

Building material , drying , solar kiln , thermal properties

Kaynakça

  1. Bois, P.J., (1977). Construction and operating a small solar heated lumber dryer. Forest Prod. Util Tech. Rep. 7, USDA.
  2. Chen, P.Y.S., (1981). Design and tests of a 500 BF solar kiln. Forest Prod. J., 31(3): 33-38.
  3. Comstock, G.L., (1978). Energy requirement for drying of wood products. Forest Prod. J., 28(3): 22-26.
  4. Dağsöz, A.K., (1977). Heat transfer. ITU Faculty of Mechanical Engineering, İstanbul.
  5. Gaugh, D.K., (1977). The design and operating a small solar timber kiln. Fiji Timbers and Their Uses, 67:17.
  6. Kılıç, A. ve Öztürk, A., (1983). Solar energy. ITU Faculty of Mechanical Engineering, İstanbul.
  7. Little, R.L., (1984). Industrial use of solar heat in lumber drying: a long – term performance report. Forest Prod. J., 34(9): 22-26.
  8. Örs, Y. and Üçüncü, K., (1992). Investigations on lumber drying possibilities at 41o north parallel. TÜBİTAK Nature Magazine, 16: 22-37.
  9. Read, W.R., Choda, A. and Cooper, P.I., (1974). A solar timber kiln, fiji timbers and their uses, 15:309-316.
  10. Üçüncü, K., (1991). Investigation of drying possibilities of timber (eastern spruce) with solar energy in 41o north latitude (Trabzon). Doctoral Thesis (Unpublished), KTU Institute of Science and Technology, Trabzon.

Kaynak Göster

APA
Üçüncü, K., & Aydın, A. (2020). Investigation Of The Effect Of Building Material Selection and Design Style On Kiln Thermal Properties In Solar Kilns. Journal of Anatolian Environmental and Animal Sciences, 5(5), 793-797. https://doi.org/10.35229/jaes.833165