In this study, it is aimed to determine the effect of
the use of different types cement and accelerator on the physico-mechanical
properties of cement-bonded particleboards. Within this scope, two types of
cements (calcium aluminate cement and Super white CEM I 52.5 R) and accelerators
(aluminum sulfate and calcium chloride) were used in the production of boards.
Therefore, CBPBs with 1200 kg/m3 target density and 1/2.75
wood-cement ratio were produced. Based on cement weight 1.5% accelerators were
used. The test results obtained were evaluated according to EN 634-2 (2009).
According to result, density values of the boards were changed with using
depending on cement and accelerator types. The use of super white cement and
calcium chloride positively affected the both mechanical properties and
dimensional stability of the boards. The use of calcium aluminate cement and
aluminum sulfate resulted in lower strength properties.
Birincil Dil | İngilizce |
---|---|
Bölüm | Makaleler |
Yazarlar | |
Yayımlanma Tarihi | 31 Aralık 2019 |
Gönderilme Tarihi | 1 Kasım 2019 |
Kabul Tarihi | 6 Aralık 2019 |
Yayımlandığı Sayı | Yıl 2019 Cilt: 4 Sayı: 4 |