Öz
Thermal transfer printing system, which works
transferred onto textile fabric by heat of the image formed in the film
material surface, is a printing system used in textile industry. The exactly
transferring onto the textile fabric of the image on the film material and the
remain stable of the transferred image after the use and washing conditions are
an important indication for a quality print. In this study, firstly it was
determined the physical properties of the bamboo jersey fabrics. Then, it was
transferred of the image in the thermal printing system on the fabrics at 3
different temperatures. And then it was performed the washing process of
fabrics before and after printing and measured the values of L*a*b*, the gloss
and the light resistance of the printed fabrics. From the obtained data, the
printability of the bamboo jersey fabrics in the thermal printing system and
the resistance of the print after the standard washing were determined.
Anahtar Kelimeler
Kaynakça
- Referans4 Sonmez, S. (2016). Effects of calendering on print densities of coated paperboards, Marmara Journal of Pure and Applied Sciences, 4, p.164-169, İstanbul, Turkey.
- Referans5 Oittinen, P., Saarelma, H. (1998). Printing, Chapter 9. Published in Cooperation with The Finnish Paper Engineers’ Association and TAPPI, Jyväskylä, Finland, p. 231-232.
- Referans6 Sprin, M. B. (1991). Electronic printing and publishing: The Document Processing Revolution, Marcel Dekker, p. 74-75, USA.
- Referans7 Sönmez, S., Akgül, A. ve Yıldız, Z. (2015). Investıgation of effect on the image quality and durability on different textile fabrics of the change of temperature in thermal transfer printing system, I. International Printing Technologies Symposium, p. 209-217, İstanbul, Turkey.
- Referans8 Özden, O. ve Sönmez, S. (2015). Thermal Paper and Printability, I. International Printing Technologies Symposium, 201-208, İstanbul.
- Referans9 Sönmez, S. (2017). Development of Printability of Bio-Composite Materials Using Luffa cylindrica Fiber, Bioresources, 12(1), p.760-773.
- Referans10 Sönmez, S., Yıldız, Z. and Akgül, A. (2019). The effects of epoxyacrylate coating on printability of bio/synthetic-based fabrics in a thermal transfer printing system, Bulgarian Chemical Communications, Vol. 51 (1), 48-53, 2019.
- Referans11 BS ISO 12040:1997: Graphic technology — Prints and printing inks —Assessment of light fastness using filtered xenon arc light.
Öz
Film malzeme yüzeyinde oluşturulan görüntünün,
ısı yoluyla tekstil kumaşları üzerine aktarılması yöntemiyle çalışan Termal
Transfer Baskı Sistemi Tekstil sektöründe de kullanılan bir baskı sistemidir. Film
malzeme üzerindeki görüntünün kumaş üzerine tam olarak aktarılması ve aktarılan
bu görüntünün kullanım şartlarına ve yıkama süreçleri sonrasında stabil kalması
kaliteli bir baskının önemli göstergeleridir. Çalışmada ilk olarak bambu süprem
örme kumaşların fiziksel özelliklerinin belirlenmiş ve sonra kumaşlar üzerine 3
farklı sıcaklıkta termal baskı sisteminde görüntünün aktarılmıştır. Baskıdan
önce ve sonra kumaşların yıkama işleminin gerçekleştirilmesi ve kumaşlara
basılmış renklerinin L*a*b*, gloss ve ışığa karşı direnç değerlerinin
belirlenmesi olmak üzere dört aşamalı olarak gerçekleştirilmiştir. Elde edilen
verilerden, bambu süprem örme kumaşların termal baskı sistemindeki
basılabilirlikleri ve baskının standart yıkanma sonrasındaki dayanımları
belirlenmiştir.
Anahtar Kelimeler
Kaynakça
- Referans4 Sonmez, S. (2016). Effects of calendering on print densities of coated paperboards, Marmara Journal of Pure and Applied Sciences, 4, p.164-169, İstanbul, Turkey.
- Referans5 Oittinen, P., Saarelma, H. (1998). Printing, Chapter 9. Published in Cooperation with The Finnish Paper Engineers’ Association and TAPPI, Jyväskylä, Finland, p. 231-232.
- Referans6 Sprin, M. B. (1991). Electronic printing and publishing: The Document Processing Revolution, Marcel Dekker, p. 74-75, USA.
- Referans7 Sönmez, S., Akgül, A. ve Yıldız, Z. (2015). Investıgation of effect on the image quality and durability on different textile fabrics of the change of temperature in thermal transfer printing system, I. International Printing Technologies Symposium, p. 209-217, İstanbul, Turkey.
- Referans8 Özden, O. ve Sönmez, S. (2015). Thermal Paper and Printability, I. International Printing Technologies Symposium, 201-208, İstanbul.
- Referans9 Sönmez, S. (2017). Development of Printability of Bio-Composite Materials Using Luffa cylindrica Fiber, Bioresources, 12(1), p.760-773.
- Referans10 Sönmez, S., Yıldız, Z. and Akgül, A. (2019). The effects of epoxyacrylate coating on printability of bio/synthetic-based fabrics in a thermal transfer printing system, Bulgarian Chemical Communications, Vol. 51 (1), 48-53, 2019.
- Referans11 BS ISO 12040:1997: Graphic technology — Prints and printing inks —Assessment of light fastness using filtered xenon arc light.
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Mühendislik |
| Bölüm | Araştırma Makaleleri |
| Yazarlar | |
| Yayımlanma Tarihi | 20 Aralık 2019 |
| Yayımlandığı Sayı | Yıl 2019 Cilt: 31 - Özel Sayı II: |