In
this study, it is aimed to obtain plasma polymerized Thiophene (ppTh) thin
films by Radio Frequency (RF) plasma polymerization technique and to determine
optical, chemical and morphological properties of these films. ppTh thin films
were fabricated at 25, 50, 75 and 100 W RF power, 15 minutes coating duration
and 500 mTorr base pressure. ppTh thin films
were analyzed by Scanning Electron Microscopy (SEM), FTIR and Uv-Vis
spectroscopy.
Functional groups of thin films were determined by
FTIR spectroscopy, and it was investigated how coating parameters affect the
chemical structure of these films. Optical properties such as absorbance, transmittance and optical band gap
were determined by Uv-Vis spectroscopy. The optical band gaps of the ppTh thin films were determined to be 2.97 eV, 3.13 eV,
3.17 eV and 3.68 eV with increasing RF power, respectively. In addition, all
thin films were highly transparent in the visible region (500 nm), and this
transparency tended to increase with increasing RF power. SEM analysis showed
that the thin films had nanosphere structure and the radius of these spheres
was about 90 nm.
In
this study, it is aimed to obtain plasma polymerized Thiophene (ppTh) thin
films by Radio Frequency (RF) plasma polymerization technique and to determine
optical, chemical and morphological properties of these films. ppTh thin films
were fabricated at 25, 50, 75 and 100 W RF power, 15 minutes coating duration
and 500 mTorr base pressure. ppTh thin films
were analyzed by Scanning Electron Microscopy (SEM), FTIR and Uv-Vis
spectroscopy.
Functional groups of thin films were determined by
FTIR spectroscopy, and it was investigated how coating parameters affect the
chemical structure of these films. Optical properties such as absorbance, transmittance and optical band gap
were determined by Uv-Vis spectroscopy. The optical band gaps of the ppTh thin films were determined to be 2.97 eV, 3.13 eV,
3.17 eV and 3.68 eV with increasing RF power, respectively. In addition, all
thin films were highly transparent in the visible region (500 nm), and this
transparency tended to increase with increasing RF power. SEM analysis showed
that the thin films had nanosphere structure and the radius of these spheres
was about 90 nm.
Birincil Dil | İngilizce |
---|---|
Konular | Mühendislik, Elektrik Mühendisliği |
Bölüm | Elektrik Elektronik Mühendisliği / Electrical Electronic Engineering |
Yazarlar | |
Yayımlanma Tarihi | 1 Mart 2019 |
Gönderilme Tarihi | 18 Eylül 2018 |
Kabul Tarihi | 19 Ekim 2018 |
Yayımlandığı Sayı | Yıl 2019 |