Araştırma Makalesi
BibTex RIS Kaynak Göster

Synthesis of Ceramic Particles (Al2O3 and TiB2) in Aluminum Matrix

Yıl 2016, Cilt: 6 Sayı: 4, 75 - 82, 31.12.2016

Metin Önal , Mehmet Gavgalı

Öz

Al
2O3 and TiB2 particles have been successfully synthesized in aluminum matrix with in situ reactions
by hot pressing method. Process parameters; sintering temperatures 900-1000oC, pressure of cold pressing: 7 MPahot pressing: 1 MPa and holding times in furnace 5-10 minutes were selected. Composite microstructures and
reinforcement particle numbers-sizes were investigated via SEM and EDS analysis. According to the analysis
results; brittle Al3Ti intermetallic transition phase frequently encountered in the literature could be eliminated.  

Anahtar Kelimeler

Composite in situ reinforcement particle sintering

Kaynakça

  • Balci O, Agaogullari D, Gokce H, Duman I, Ovecoglu LM, 2014. Influence of TiB 2 particle size on the microstructure and properties of Al matrix composites prepared via mechanical alloying and pressureless sintering. Journal of Alloys and Compounds, 586: 78-84.
  • Chen W, Xiao H, Fu Z, Fang S, Zhu D, 2013. Reactive hot pressing and mechanical properties of TiAl3/Ti3AlC2/Al2O3 in situ composite. Materials and Design, 49: 929–934.
  • Chu MG, Premkumar MK, 1993. Mechanism of TiC formation in Al/TiC in situ metal-matrix composites. Metallurgical and Materials Transactions A, 24 (12): 2803-2805.
  • Dikici B, Gavgali M, Bedir F, 2010. Synthesis of in situ TiC particles in liquid aluminum: the effect of sintering temperature. Journal of Composite Materials, 45 (8): 895-900.
  • Dikici B, Gavgali M, 2013. The effect of sintering time on synthesis of in situ submicron α-Al 2O3 particles by the exothermic reactions of CuO particles in molten pure Al. Journal of Alloys and Compounds, 551: 101-107.
  • Elrakayby H, Kim HK, Hong SS, Kim KT, 2015. Investigation of densifcation behavior of nickel alloy powder during hot isostatic pressing. Advanced Powder Technology, 26: 1314–1318.
  • Jun D, Liu YH, Yu SR, Li WF, 2004. Dry sliding friction and wear properties of Al2O3 and carbon short fbres reinforced Al- 12Si alloy hybrid composites. Wear, 257: 930-940.
  • Onal M, Gavgali M, 2015. In situ aluminum metal matrix composites and their production by hot pressing. Journal of Science and Technology, Ordu University, 5 (2): 63-73.
  • Sharif ME, Karimzadeh F, Enayati HM, 2011. Preparation of Al2O3- TiB 2 nanocomposite powder by mechanochemical reaction between Al, B2O3 and Ti. Advanced Powder Technology, 22: 526-531.
  • Zhu H, Wang H, Ge L, Chen S, Wu S, 2007. Formation of composites fabricated by exothermic dispersion reaction in Al-TiO 2-B2O3 system. Trans. Nonferrous Met. Soc. China, 17: 590-594.
  • Zhu H, Wang H, Ge L, Xu W, Yuan Y, 2008. Study of microstructure and mechanical properties of composites fabricated by the reaction method in an Al-TiO 2-B2O3 system. Materials Science and Engineering A, 478: 87–92.
  • Kayikci R, Savas O, Kurtulus O, 2009. AlB2/Al composite production boron oxid with added research. 5. International Advanced Technology Symposium (IATS’09), 13-15 May 2009, Karabuk, Turkey.
  • Kok M, 2006. Abrasive wear of Al2O3 particle reinforced 2024 aluminum alloy composites fabricated by vortex method. Composites: Part A, 37: 457–464.
  • Kurt A, 1992. Properties of powder metal bronze bearings. Gazi University, Institute of Natural and Applied Sciences, (Printed) Master Thesis, 124 p.
  • Lu L, Lai OM, Su Y, Teo LH, Feng FC, 2001. In situ TiB2 reinforced Al alloy composites. Scripta Materialia, 45: 1017-1023.
  • German MR, 2013. Sintering Theory and Practice Book. First Edition, Pennsylvania, USA. 550 p.

Synthesis of Ceramic Particles (Al2O3 and TiB2) in Aluminum Matrix

Yıl 2016, Cilt: 6 Sayı: 4, 75 - 82, 31.12.2016

Metin Önal , Mehmet Gavgalı

Öz

Al
2O3 ve TiB2 partiküller, sıcak presleme yöntemi sayesinde in situ reaksiyonlarla alüminyum matris içinde
başarıyla sentezlenmişlerdir. İşlem parametreleri; sinterleme sıcaklığı 900-1000oC, soğuk presleme basıncı: 7 MPasıcak presleme basıncı: 1 MPa ve fırında bekletme süresi 5-10 dakika olarak seçilmiştir. Kompozit mikroyapıları ve
takviye partikül sayı-boyutları SEM ve EDS analizleri vasıtasıyla belirlenmiştir. Analiz sonuçlarına göre; literatürde
sıkça rastlanan gevrek Al3Ti intermetalik geçiş fazı elimine edilebilmiştir.  

Anahtar Kelimeler

In situ kompozit sinterleme takviye elemanı

Kaynakça

  • Balci O, Agaogullari D, Gokce H, Duman I, Ovecoglu LM, 2014. Influence of TiB 2 particle size on the microstructure and properties of Al matrix composites prepared via mechanical alloying and pressureless sintering. Journal of Alloys and Compounds, 586: 78-84.
  • Chen W, Xiao H, Fu Z, Fang S, Zhu D, 2013. Reactive hot pressing and mechanical properties of TiAl3/Ti3AlC2/Al2O3 in situ composite. Materials and Design, 49: 929–934.
  • Chu MG, Premkumar MK, 1993. Mechanism of TiC formation in Al/TiC in situ metal-matrix composites. Metallurgical and Materials Transactions A, 24 (12): 2803-2805.
  • Dikici B, Gavgali M, Bedir F, 2010. Synthesis of in situ TiC particles in liquid aluminum: the effect of sintering temperature. Journal of Composite Materials, 45 (8): 895-900.
  • Dikici B, Gavgali M, 2013. The effect of sintering time on synthesis of in situ submicron α-Al 2O3 particles by the exothermic reactions of CuO particles in molten pure Al. Journal of Alloys and Compounds, 551: 101-107.
  • Elrakayby H, Kim HK, Hong SS, Kim KT, 2015. Investigation of densifcation behavior of nickel alloy powder during hot isostatic pressing. Advanced Powder Technology, 26: 1314–1318.
  • Jun D, Liu YH, Yu SR, Li WF, 2004. Dry sliding friction and wear properties of Al2O3 and carbon short fbres reinforced Al- 12Si alloy hybrid composites. Wear, 257: 930-940.
  • Onal M, Gavgali M, 2015. In situ aluminum metal matrix composites and their production by hot pressing. Journal of Science and Technology, Ordu University, 5 (2): 63-73.
  • Sharif ME, Karimzadeh F, Enayati HM, 2011. Preparation of Al2O3- TiB 2 nanocomposite powder by mechanochemical reaction between Al, B2O3 and Ti. Advanced Powder Technology, 22: 526-531.
  • Zhu H, Wang H, Ge L, Chen S, Wu S, 2007. Formation of composites fabricated by exothermic dispersion reaction in Al-TiO 2-B2O3 system. Trans. Nonferrous Met. Soc. China, 17: 590-594.
  • Zhu H, Wang H, Ge L, Xu W, Yuan Y, 2008. Study of microstructure and mechanical properties of composites fabricated by the reaction method in an Al-TiO 2-B2O3 system. Materials Science and Engineering A, 478: 87–92.
  • Kayikci R, Savas O, Kurtulus O, 2009. AlB2/Al composite production boron oxid with added research. 5. International Advanced Technology Symposium (IATS’09), 13-15 May 2009, Karabuk, Turkey.
  • Kok M, 2006. Abrasive wear of Al2O3 particle reinforced 2024 aluminum alloy composites fabricated by vortex method. Composites: Part A, 37: 457–464.
  • Kurt A, 1992. Properties of powder metal bronze bearings. Gazi University, Institute of Natural and Applied Sciences, (Printed) Master Thesis, 124 p.
  • Lu L, Lai OM, Su Y, Teo LH, Feng FC, 2001. In situ TiB2 reinforced Al alloy composites. Scripta Materialia, 45: 1017-1023.
  • German MR, 2013. Sintering Theory and Practice Book. First Edition, Pennsylvania, USA. 550 p.
Toplam 16 adet kaynakça vardır.

Ayrıntılar

Bölüm Elektrik Elektronik Mühendisliği / Electrical Electronic Engineering
Yazarlar

Metin Önal

Mehmet Gavgalı Bu kişi benim

Yayımlanma Tarihi 31 Aralık 2016
Gönderilme Tarihi 25 Mart 2016
Kabul Tarihi 19 Haziran 2016
Yayımlandığı Sayı Yıl 2016 Cilt: 6 Sayı: 4

Kaynak Göster

APA Önal, M., & Gavgalı, M. (2016). Synthesis of Ceramic Particles (Al2O3 and TiB2) in Aluminum Matrix. Journal of the Institute of Science and Technology, 6(4), 75-82.
AMA Önal M, Gavgalı M. Synthesis of Ceramic Particles (Al2O3 and TiB2) in Aluminum Matrix. Iğdır Üniv. Fen Bil Enst. Der. Aralık 2016;6(4):75-82.
Chicago Önal, Metin, ve Mehmet Gavgalı. “Synthesis of Ceramic Particles (Al2O3 and TiB2) in Aluminum Matrix”. Journal of the Institute of Science and Technology 6, sy. 4 (Aralık 2016): 75-82.
EndNote Önal M, Gavgalı M (01 Aralık 2016) Synthesis of Ceramic Particles (Al2O3 and TiB2) in Aluminum Matrix. Journal of the Institute of Science and Technology 6 4 75–82.
IEEE M. Önal ve M. Gavgalı, “Synthesis of Ceramic Particles (Al2O3 and TiB2) in Aluminum Matrix”, Iğdır Üniv. Fen Bil Enst. Der., c. 6, sy. 4, ss. 75–82, 2016.
ISNAD Önal, Metin - Gavgalı, Mehmet. “Synthesis of Ceramic Particles (Al2O3 and TiB2) in Aluminum Matrix”. Journal of the Institute of Science and Technology 6/4 (Aralık 2016), 75-82.
JAMA Önal M, Gavgalı M. Synthesis of Ceramic Particles (Al2O3 and TiB2) in Aluminum Matrix. Iğdır Üniv. Fen Bil Enst. Der. 2016;6:75–82.
MLA Önal, Metin ve Mehmet Gavgalı. “Synthesis of Ceramic Particles (Al2O3 and TiB2) in Aluminum Matrix”. Journal of the Institute of Science and Technology, c. 6, sy. 4, 2016, ss. 75-82.
Vancouver Önal M, Gavgalı M. Synthesis of Ceramic Particles (Al2O3 and TiB2) in Aluminum Matrix. Iğdır Üniv. Fen Bil Enst. Der. 2016;6(4):75-82.