Bu çalışmanın amacı, akıllı ulaşım sistemlerinin temel bileşenlerinden biri olan filo yönetim sistemleri kapsamında, öncelikle Muğla’da madeni yağ sektöründe faaliyet gösteren bir işletmenin lojistik süreçlerinin iyileştirilmesi amacıyla depo yeri seçimi yapmak ve ardından araç rotalama problemine entegre bir çözüm sunmaktır. Bu amaç doğrultusunda, çalışma iki aşamada gerçekleştirilmiştir. İlk aşamada, beş aday depo yeri AHP ve TOPSIS yöntemleriyle değerlendirilmiş ve en uygun depo yeri belirlenmiştir. İkinci aşamada ise, seçilen depo esas alınarak EZTDARP ele alınmış, GAMS yazılımı kullanılarak beş farklı senaryo için matematiksel model çözümü gerçekleştirilmiştir. Elde edilen bulgular, depo yeri seçiminde ÇKKV yöntemlerinin etkinliğini ortaya koyarken, belirlenen rotaların lojistik maliyetleri önemli ölçüde azalttığını göstermektedir. Literatürde depo yeri seçimini ve araç rotalama problemlerini birlikte ele alan çalışmalar sınırlı sayıdadır. Bu çalışmada her iki problem entegre bir yaklaşımla ele alınarak literatüre katkı sunulmaktadır. Araştırma bulgularının, lojistik optimizasyon literatürüne teorik katkı sağlamasının yanı sıra, pratik uygulamada ele alınan işletmeye operasyonel verimliliğini artırmasına katkı sağlandığı görülmektedir.
: Araç rotalama problemi çok kriterli karar verme depo seçimi kesin çözüm filo yönetimi sistemleri
The aim of this study, within the scope of fleet management systems, which is one of the basic components of intelligent transport systems, is to firstly select a warehouse location in order to improve the logistics processes of an enterprise operating in the mineral oil sector in Muğla and then to provide an integrated solution to the vehicle routing problem. To achieve this, the study has been conducted in two stages. In the first stage, five candidate depot locations were evaluated using AHP and TOPSIS methods, and the most suitable depot location was determined. In the second stage, based on the selected depot, the VRPSPD (Vehicle Routing Problem with Simultaneous Pickup Delivery) was addressed, and mathematical model solutions for five different scenarios were performed using GAMS software. The findings indicate that the effectiveness of the Multi-Criteria Decision-Making (MCDM) methods in depot location selection, while the determined routes significantly reduced logistics costs. There are limited studies in the literature that address both depot location and vehicle routing problems together. In this study, both problems are addressed with an integrated approach, contributing to the literature. It is observed that the research findings not only provide a theoretical contribution to the logistics optimization literature but also contribute to increasing operational efficiency for the company addressed in the practical application.
Vehicle routing problem multi-criteria decision-making depot selection exact solution fleet management system
| Birincil Dil | Türkçe |
|---|---|
| Konular | Modelleme ve Simülasyon, Karayolu Taşımacılığı ve Nakliye Hizmetleri, Lojistik |
| Bölüm | Makaleler |
| Yazarlar | |
| Erken Görünüm Tarihi | 22 Ekim 2025 |
| Yayımlanma Tarihi | 25 Ekim 2025 |
| Gönderilme Tarihi | 4 Mayıs 2025 |
| Kabul Tarihi | 26 Ağustos 2025 |
| Yayımlandığı Sayı | Yıl 2025 Cilt: 8 Sayı: 2 |