A Web Based Educational Programming Logic Controller Training Set Based on Vocational High School Students' Demands

Yıl 2018, Cilt: 3 Sayı: 1, 35 - 44, 01.01.2018

Abdullah Alper Efe

Öz

The purpose of this study was to design and develop aProgramming Logic Controller Training Set according to vocational high school students’ educational needs. In this regard, by using the properties of distance education the proposed system supported “hands-on” PLC programming laboratory exercises in industrial automation area. The system allowed students to access and control the PLC training set remotely. For this purpose, researcher designed a web site to facilitate students’ interactivity and support PLC programming. In the training set, Induction Motor, Frequency Converter and Encoder tripart controlled by Siemens Simatic S7-200 PLC controller by the help of SIMATIC Step 7 Programming Software were used to make the system more effective and efficient. Moreover, training set included an IP camera system allowing to monitor devices and pilot application. By working with this novel remote accessible training set, students and researchers recieved a chance to inhere self paced learning experiences. Also, The PLC training set offered an effective learning enviroenment for distance education, which is based on presenting the content on the web and opening it to the online users and provided a safe and economical solution for multiple users in a workplace to enhance the quality of education with less overall cost.

Anahtar Kelimeler

Distance Education, Self Pace Learning, Individual Learning, Remote Access, , Online Laboratory, PLC Training Set

Kaynakça

• Asumadu, J. A., Tanner, R., Fitzmaurice, J., Kelly, M., Ogunleye, H., Belter, J., & Koh, S. C. (2005). A Web-Based Electrical and Electronics Remote Wiring and Measurement Laboratory (RwmLAB) Instrument. IEEE Transactions on Instrumentation and Measurement, 54(1), 38- 44.
• Aydoğmuş, Z., & Aydoğmuş, O. (2009). A Web-Based Remote Access Laboratory Using SCADA. IEEE Trans. on Education, 52(1), 126-132.
• Bektaş, A., Bayındır, R., & Çolak, İ. (2007). Protection of Induction Motor Using PLC. Gazi University, Technical Education Faculty, Journal of Politeknik, 10(2), 117-121.
• Bellmunt, O.G., Miracle, D. M., Arellano, S. G., Sumper, A., & Andreu, A. S. (2006). A Distance PLC Programming Course Employing a Remote Laboratory Based On A Flexible Manufacturing Cell, IEEE Transactions On Education, 49(2), 278-284.
• Birbir, Y., & Nogay, H. S. (2008). Design and Implementation of PLC-Based Monitoring Control System for Three-Phase Induction Motors Fed by PWM Inverter. International Journal of Systems Applications, Engineering & Development, 3(2), 128-135.
• Chang, W.F., Wu, Y.C., Chiu, C.W., & Yu, W.C. (2003). Design and Implementation of a Web- Based Distance PLC Laboratory. Proceedings of the 35th. Southeastern Symposium on System Theory, West Virginia, 326-329.
• Çakır, H., Eryılmaz, S., & Uluyol, Ç. (2014). 14. Bölüm: Web Temelli Eğitim, Eğitimciler için Bilişim Teknolojileri, Ankara, Pegem A Yayıncılık.
• Erdemir,G., & Kuzucuoğlu, A. E. (2011). Web Based Process Control Laboratory for Control Education, http://digital.ni.com/worldwide/arabia.nsf/web/all199B7C62374DD202862569580067C179, 23 April 2011
• Gülbahar, Y. (2012). e-Öğrenme, Ankara: Pegem Akademi.
• Gökbulut, M., Bal, C., & Dandil, B. (2006). A Virtual Electrical Drive Control Laboratory: Neuro- Fuzzy Control of Induction Motors. Computer Applications in Engineering Education, 14(3), 211-221.
• Horton, W. (2000). Designing Web Based Training, USA: John Wiley & Sons Inc. Hurley, W.G., Chi K.L, (2005). Development, Implementation, and Assessment of a Web- Based Power Electronics Laboratory. IEEE Transactions on Education, 48(4), 567-573.
• Ioannides, M. G. (2004). Design and Implementation of PLC-Based Monitoring Control System for Induction Motor. IEEE Transactions on Energy Conversion, 19, No:3 USA.
• Kurtulan, S. (2007). Industrial Control Systems, Pg.1, Nobel Pub.,Istanbul.
• Martis, C. S., Hedesiu, H. C., Szabo, L., Tataranu, B., Jurca, F., & Oprea, C. (2006) Electrical Machines Virtual Laboratory: Grid Connection of a Synchronous Generator. 12th International Power Electronics and Motion Control Conference, Slovenia, 1709-1714.
• MEB, (Temmuz, 2017). Mesleki ve Teknik Eğitim Genel Müdürlüğü Öğretim Programları web: http://www.megep.meb.gov.tr/?page=ogretimProgramlari
• Saygın, C., & Kahraman, F. (2004). A Web-Based Programmable Logic Controller Laboratory for Manufacturing Engineering Education. International Journal of Advanced Manufacturing Technology, 24(7), 590-598.
• Sepe, R. B. (2001). Real-Time Motor Testing and Development over the Internet. Sensors, 19(11), 30-40.
• Sepe, R. B., Chamberland, M., & Short, N. (1999). Web- Based Virtual Engineering Laboratory (VE- LAB) for a Hybrid Electric Vehicle Starter/Alternator. Proceedings of the Industry Applications Conference, 4, 2642–2648.
• Strandman, J.O., Berntzen, R., Fjeldly, A., Ytterdal, T., & Shur, M. S. (2002). Lab-on Web; Performing Device Characterization via Internet Using Modern Web Technology. Proceedings of the 4th. IEEE International Caracas Conference on Devices. Circuits and Systems, Aruba, 1-6.
• Tsakiris, A., Filippidis, I., Grammalidis, N., Tzovaras, D., & Strintzis, M. G. (2005). Remote Experiment Laboratories Using Virtual Reality Technologies: The VRLAB Project. International Conference on Theory and Applications in Mathematics and Informatics, Alba Lulia, Romania, 1-13.
• Vanijjirattikhan, R., Ayhan, B., Tipsuwan, Y., & Chow, M. Y. (2003). A Web-Based Distributed Dynamics Simulation of a Three-Phase Induction Motor. Proceedings of NSF Workshop on Teaching of First Courses on Power Electronics and Electric Drives and Advance Course on Power System Applications of Power Electronics, Tempe, Arizona, 1-21.
• Yeung, K., & Huang, J. (2003). Development of a Remote Access Laboratory: A DC Motor Control Experiment, Computers in Industry, 52(3), 305- 311.
• Zhuanfeng, W., Weiguo, L., Xiwei, Z., & Xin, M. (2005). Study on Web Based Network Electrical Machine Control. Proceedings of the IEEE 8th International Conference on Electrical Machines and Systems, Nanjing, China, 1640-1643.
• Zhang L., Zeng, A., & Zhang Y. (2007). On Remote Real-time Communication between MATLAB and PLC Based on OPC Technology. Proceedings of the 26th Chinese Control Conference July 26-31, Zhangjiajie, Hunan, China.