THERMAL AND MECHANICAL PROPERTIES OF BUILDING STONES IN AFYON AND KARAMAN REGION

Öz

In this study, some of the physical properties of the Seydiler and Sorkun stones from Afyon and Kızılören and Kazım Karabekir stones from Karaman which have been used extensively as a building material in cities and even in neighbor cities were investigated. Used as construction components, these stones are highly praised by the people living in those areas due to their ease of handling and convenient thermal characteristics. The aim is to determine the thermal and mechanical properties of these stones. Samples were taken from two different quarries for each stone and after chemical analysis, they were subjected to thermal conductivity, specific heat capacity, water absorption, inhalation ability and mechanical strength tests. The results were compared with other building materials, especially in terms of energy saving, strength and comfort aspects.

Anahtar Kelimeler

• Seydiler stone
• Sorkun stone
• Kızılören stone
• Kazım Karabekir stone
• building material

Kaynakça

1. 1. Adin H. (2007). Mardin ve Midyat’ta kullanılan bina yapı taşlarının bazı fiziksel özellikleri, Mühendis ve Makine, cilt 48, sayı 570, 13-17.
2. 2. Bicer A. (2019a). Some physical properties of the building Stones from Southeastern Anatolia Region, Bartın University International Journal of Natural and Applied Sciences, 2(1), 9-15.
3. 3. Bicer A. (2019b). Some physical properties of the building stones from Elazıg-Nevsehir region, Nevşehir Bilim ve Teknoloji Dergisi, 8(2), 96-102.
4. 4. Bicer A. (2019c). Ahlat ve Malazgirt yapı taşlarının bazı fiziksel özellikleri, Fırat Üniversitesi Müh. Bil. Dergisi, 31(2), 301-307.
5. 5. Çelik M. Y. (2003). Types and usage areas of the decorative natural building stones, Madencilik, Vol.42 (1), pp. 3-15.
6. 6. Devecioglu A. G. (2001). An investigation on the heat conduction parameters of porous building stones, Master Thesis, Firat University.
7. 7. Devecioğlu A. G., Biçer Y. & Kavak E. (2001). Diyarbakır Karacadağ taşının bazı fiziksel özellikleri, II.GAP ve SANAYİ Kongresi, 29-30 Eylül, TMMOB Makina Mühendisleri Odası, 401-406, Diyarbakir.
8. 8. Kaya A. C., Yapıcı N. & Anıl M. (2008). The usuage of Midyat Stone as a covering and building material researching, Ç.Ü Fen Bilimleri Enstitüsü Dergisi, 19(3), 94-104.

9. 9. Kazancı N. & Gürbüz A. (2014). Jeolojik miras nitelikli Türkiye doğal taşları, Türkiye Jeoloji Bülteni. 57: 1.
10. 10. Pivko D. (2003). Natural stones in earth’s history, Acta Geologica, 58, 73-86.
11. 11. Toksoy M. (1988). Thermal conductivity coefficients of industrial materials, Journal of Engineers and Machinery, 347, 12-15.
12. 12. TS 500 (2000). Turkish Standard, Ankara.
13. 13. TS 699 (1978). The test and experiment methods of natural building stones, TSE, Ankara.
14. 14. Vysnıauskas V. V. & Zıkas A. A. (1988). Determination of the thermal conductivity of ceramics by the Hot-Wire Technique. Heat Transfer Soviet Research, 20 (1): 137-142.
15. 15. Ytong (1985). Yapı malzeme ve elemanları, özellikleri-kullanma yöntemleri (1985), Ytong, İstanbul.