Effect of Treatment Time on Deep Eutectic Solvent Treatment of Scots Pine Wood
Öz
Aim of study: The influence of the treatment time (1 hour, 2 hours, and 3 hours) on the deep eutectic solvent (DES) treatment of Scots pine (Pinus sylvestris L.) wood is investigated in this study.
Area of the study: Determination of DES performance on the Scots pine wood chemical structure.
Material and methods: Choline chloride (ChCl) and lactic acid (LA) mixture with molar ratio of 1:10 (w:w) was used as a DES solvent. Treatments were carried out in an autoclave at 121 °C. The effects of DES treatment on the properties of wood and lignin samples of Scots pine were determined according to the relevant standards.
Main results: The delignification ratio, lignin purity, and lignin yield in the 3h-treated sample were determined to be 79.78%, 86.43%, and 82.48%, respectively. The crystallinity index (CrI) was increased from 55.87% to 71.58% with 3 h DES treatment. Brunauer-Emmett-Teller (BET) analysis results showed that the surface area of the sample increased with 3-h DES treatment (from 3.095 m2/g to 3.621 m2/g). The 1-hour DES-treated sample yielded the lightest colored lignin (L*: 71.62).
Research highlights: Treatment time of Scots pine wood during DES treatment has a significant effect on the wood and lignin properties
Anahtar Kelimeler
Deep Eutectic Solvent, Lignin, Scots pine, Crystallinity Index, XRD, BET, Biorefinery
Kaynakça
- Bai, Y., Zhang, X. F., Wang, Z., Zheng, T. & Yao, J. (2022). Deep eutectic solvent with bifunctional Brønsted-Lewis acids for highly efficient lignocellulose fractionation. Bioresource Technology, 347, 126723.
- Chen, Z. & Wan, C. (2018). Ultrafast fractionation of lignocellulosic biomass by microwave-assisted deep eutectic solvent pretreatment. Bioresource Technology, 250, 532-537.
- Chen, Y., Zhang, L., Yu, J., Lu, Y., Jiang, B., Fan, Y. & Wang, Z. (2019). High-purity lignin isolated from poplar wood meal through dissolving treatment with deep eutectic solvents. Royal Society Open Science, 6(1), 181757.
- Choi, K.H., Lee, M.K. & Ryu, J.Y. (2016a). Effect of molar ratios of DES on lignin contents and handsheets properties of thermomechanical pulp. Journal of Korea TAPPI, 48, 28-33.
- Choi, K.H., Nam, Y.S., Lee, M.K. & Ryu, J.Y. (2016b). Changes of BCTMP fibers and handsheets properties by the treatment of LB DES at different molar ratios. Journal of Korea TAPPI, 48, 75-81.
- Cui, J., Chen, R., Lei, L. & Hou, Y. (2022). Green wood pulping processes with high pulp yield and lignin recovery yield by deep eutectic solvent and its aqueous solutions. Biomass Conversion and Biorefinery, 1-15.
- Fiskari, J., Ferritsius, R., Osong, S. H., Persson, A., Höglund, T., Immerzeel, P. & Norgren, M. (2020). Deep eutectic solvent delignification to low-energy mechanical pulp to produce papermaking fibers. BioResources, 15, 6023-6032.
- French, A.D. (2014). Idealized powder diffraction patterns for cellulose polymorphs. Cellulose, 21(2), 885-896.
- Gong, L., Zha, J., Pan, L., Ma, C. & He, Y.C. (2022). Highly efficient conversion of sunflower stalk-hydrolysate to furfural by sunflower stalk residue-derived carbonaceous solid acid in deep eutectic solvent/organic solvent system. Bioresource Technology, 351, 126945.
- Gülsoy, S.K., Küçüle, A. & Gençer, A. (2022a). Deep eutectic solvent pulping from sorghum stalks. Maderas. Ciencia y Tecnología, 24(50), 1-12.