Polistren kompozit kontrplakların bazı teknolojik özellikleri üzerine pres parametrelerinin etkileri

Yıl 2017, , 517 - 522, 27.11.2017

Cenk Demirkır Hasan Öztürk Gürsel Çolakoğlu

https://doi.org/10.17475/kastorman.285645

Cited By: 6

Öz

Çalışmanın
amacı: Ahşap kompozit malzemelerin üretiminde
kullanılan tutkalların birçoğu formaldehit içeriği nedeniyle insan ve çevre
sağlığı açısından bir tehdit unsuru olarak görülmektedir. Bu nedenle odun
kökenli levhalarda ki formaldehit emisyonunun azaltılmasına yönelik etkili
metotların geliştirilmesi için birçok çalışma yapılmış ve çeşitli yöntemler
denenmiştir. Bu çalışmada polistren kompozit kontrplakların bazı teknolojik
özellikleri üzerine pres parametrelerinin etkilerinin araştırılması
amaçlanmıştır.

Çalışma alanı: Bu çalışma, Trabzon’daki Karadeniz Teknik
Üniversitesi Orman Endüstri Mühendisliği Bölümü Pilot tesisinde yapılmıştır.

Materyal
ve Yöntem: Polistren kompozit kontrplakların
üretiminde kavak (Populus deltoides)  kaplamalar kullanılmıştır. Geleneksel
kontrplakların üretiminde yapıştırıcı olarak ÜF tutkalı kullanılmıştır.
Polistren kompozit kontrplakların üretiminde farklı pres sıcaklıkları (130,
140, 150 ^oC) ve pres süreleri (6, 8, 10 dakika)
seçilmiştir. Levhaların,  çekme makaslama
direnci TS EN 314-1, eğilme direnci ve elastikiyet modülü TS EN 310, özgül
ağırlıkları TS EN 323 ve denge rutubet miktarları TS EN 322 standartlarına göre
belirlenmiştir.

Sonuçlar: Yapılan deneyler sonucunda genel olarak levhaların
mekanik özelliklerinin ve yoğunluk değerlerinin pres sıcaklığı ve pres
süresinin artmasına bağlı olarak artış gösterdiği görülürken denge rutubet
miktarlarının azaldığı görülmüştür.

Araştırma
vurguları: Bu çalışma,
polistiren atıklarının kontrplak üretiminde iç mekan kullanımları için
alternatif bir yapıştırma malzemesi olarak kullanılabileceğini ortaya
koymuştur.

Effects of Press Parameters on Some Technological Properties of Polystren Composite Plywood

Öz

Abstract

Aim of study: Formaldehyde
content of most of resins used in wood based composite production, wood
composite materials have been seen a threat on human health and environment.
Therefore, numerous studies have been made to develop an effective method to
decrease formaldehyde emission from the wood based panels and various methods
have been tried. The aim of the study was to investigate those effects of press
parameters on some technological properties of polystren composite plywood.

Area of study: This study was conducted at
the Pilot Facility of Department of Forest Industry Engineering, Karadeniz
Technical University in Trabzon, Turkey.

Material and Methods: Poplar
(Populus deltoides) veneers were used
to produce polystren composite plywood. Urea-formaldehyde adhesive was used as
bonding material for traditional plywood panels. Three different press
temperature (130, 140, 150 ^oC) and pressing time (6, 8, 10 minutes)
were chosen as press parameters in the manufacturing of polystren composite
plywood. Bonding strength, bending strength, modulus of elasticity, density and
equilibrium moisture content of panels were determined according to TS EN
314-1, TS EN 310, TS EN 323 and TS EN 322, respectively.

Main results: The
experimental results showed that mechanical properties and density of panels
generally increased with increasing press temperature and pressing time whereas
the equilibrium moisture content of panels decreased.

Research highlights: This study
showed that polystyrene wastes can be used in plywood manufacturing as an
alternative bonding material for interior uses.

Anahtar Kelimeler

Polystren composite plywood, Press parameters, Press temperature, Pressing time

Kaynakça

• Ahmad, M., Osman, S. 2011.Study on bonding strength of bamboo/bamboo unidirectional laminate with UF and PF-effect of pressing time on adhesive bonding strength. 18th International Conference on Composite Materials (ICCM18); Korea: Jeju Island.
• APA, 2010. The Engineered Wood Association. Technical Topics. Form No: TT-044B, March.
• Aydin, i., Colakoglu, G. 2008. Variations in Bending Strength and Modulus of Elasticity of Spruce and Alder Plywood after Steaming and High Temperature Drying. 15 (5), 371-374.
• Bohm, M., Salem, M.Z.M., Srba, J. 2012. Formaldehyde emission monitoring from a variety of solid wood, plywood, blockboard and flooring products manufactured for building and furnishing materials. J. Hazard. Mater., 221-222, 68-79.
• Colakoglu, G., 1993. Effect of the production parameter on formaldehyde emission and technical properties of plywood. PhD thesis, KTU Graduate School of Natural and Applied Sciences, 21 p., Trabzon.
• Demirkir, Cenk., Özsahin, Şükrü., Aydin, Ismail., Colakoglu, Gursel. 2013. Optimization of some panel manufacturing parameters for the best bonding strength of plywood. International Journal of Adhesion & Adhesives. 46, 14-20.
• DIN 68705-3, 2003. Structure Plywood. German Standards Institute, Verlag.
• Fang, L., Chang, L., Guo, W., Ren, Y., Wang, Z. 2013. Preparation and characterization of wood-plastic plywood bonded with high density polyethylene film. Eur. J. Wood Prod., 71, 739–746.
• Hoong, Y. B., Paridah, M. T. 2013. Development a new method for pilot scale production of high grade oil palm plywood: effect of hot-pressing tim, Journal Material and Design, 45, 145.
• Hu,Y., Nakao, T., Nakai, T., Gu, J. and Wang, F. 2005. Vibrational Properties of Wood Plastic Plywood. Journal of Wood Science. 51, 13-17.
• I, Aydin., 2004. Effects of some manufacturing conditions on wettability and bonding of veneers obtained from various wood species. PhD thesis, Karadeniz Technical University, Faculty of Forestry, Natural and Applied Sciences Institute, Trabzon, Turkey
• IARC., 2004. Overall evaluations on carcinogenicity to humans. In: As evaluated in IARC monographs, vol. 1. Lyon, France: International Agency for Research on Cancer.
• Jianying, X., Tao, J., Yingyan, G., Min, Z., Xia, Z. 2010. Reduction of formaldehyde emission of wood-based panels. Bioinformatics and Biomedical Engineering (iCBBE), 2010 4th International Conference on (18-20 June), 1-3, Chengdu, Chine.
• Kim, S.M,, Kim, H.S., Kim, H.J., Yang, H.S. 2008. Fast curing PF resin mixed with various resins and accelerators for building composite materials. Construction Building Materials. 22, 2141–6.
• Kurowska, A., Borysiuk, P., Maminski, M.L. 2011. Simultaneous veneers incising and lower pressing temperatures – the effect on the plywood pressing time. Eur J Wood Prod. 69, 495–7.
• Luo, Jing., Luo, Jianlin., Gao, Qiang., Li, Jianzhang. 2015. Effects of heat treatment on wet shear strength of plywood bonded with soybean meal-based adhesive. Industrial Crops and Products. 63, 281-285.
• TS EN 310, 1999. Wood based panels. Determination of modulus of elasticity in bending and of bending strength. Turkish Standards Institute, Ankara.
• TS EN 314-1, 1998. Plywood - Bonding quality - Part 1: Test methods. Turkish Standards Institute, Ankara.
• TS EN 322, 1999. Wood-based panels-Determination of moisture content. Turkish Standards Institute, Ankara.
• TS EN 323-1, 1999. Wood- Based panels- Determination of density. Turkish Standards Institute, Ankara.