Investigation of subsidence induced by the production of sublevel caving method in Divrigi Ekinbaşı underground iron mine

Yıl 2023, , 159 - 166, 12.02.2024

Bülent Erdem , Atilla Ceylanoğlu , Bahadır Şengün

https://doi.org/10.30797/madencilik.1323500

Öz

In this study, the subsidence induced by sublevel caving production method applied in the Divriği Ekinbaşı underground mine was investigated and evaluated. In this context, on-site observations and measurements were made in the underground mine. Two point cloud datasets with an approximately seven-month time difference were analyzed, and surface collapses, cracks, and fractures were plotted on the map For each periods, the fracture initiation and subsidence angles of hangingwall and footwall sides were determined. As a result of the analysis of first and second data sets, subsidence angle of the hangingwall side remained the same as 50.40°, in the footwall side 72.84° and 53.44° respectively. The areas of fracture and subsidence regions increased by 4.67 ha and 7.67 ha, respectively, over a period of around seven months.

Anahtar Kelimeler

Sublevel caving method, Subsidence, Fracture initiation and subsidence angles

Kaynakça

• Barba, T.F.V. (2008) Numerical analyses of the hangingwall at the Kiirunavaara mine, Licentiate Thesis, Luleå University of Technology, Department of Civil and Environmental Engineering, Division of Rock Mechanics, Luleå, Sweden.
• Blodgett, S., Kuipers, J.R. (2002) Underground Hard Rock Mining: Subsidence and Hydrologic Environmental Impacts, Technical Report, 50s.
• Brown, E.T., Ferguson, G.A. (1979) Progressive hangingwall caving at Gath’s mine, Rhodesia, Trans Inst Min. Metall, 88, A92-A105.
• Ceylanoğlu, A., Erdem, B, Şengün, B., Karatepe, A. ve Yayla, M.E. (2022).
• Evaluation of actively applied mining method and ore loss in Divriği A-Kafa and Ekinbaşı underground iron mines, Scientific Mining Journal, 61 (4), 213-220.
• Erdem, B., Ceylanoğlu, A., Doğan, T., Şengün, B. (2019). Evaluation of the affected surface area and the environmental effects of the subsidence caused by the applied mining method in Divriği Ekinbaşı Underground Iron Mine. Sivas Cumhuriyet University Mining Engineering Department, Sivas, 34 p. (in Turkish, unpublished).
• Hamrin, H., 2001. Underground mining methods and applications. Underground mining methods: Engineering fundamentals and international case histories, eds. W.A. Hustrulid and R.L. Bullock, SME, Littleton, Colorado, pp 3-14.
• Herdocia, A. (1991) Hanging wall stability of sublevel caving mines in Sweden, PhD Thesis, Luleå University of Technology, Luleå, Sweden.
• Hoek, E. (1974) Rock slope engineering, Institution of Mining and Metallurgy, London, ISBN 10: 0900488212.
• Lupo, J.F. (1996) Evaluation of deformations resulting from mass mining of an inclined orebody, PhD Thesis, Colorado School of Mines, Denver, ABD.
• Shuai, C., Weidong, S., Dan, D., Yuankun, L., Jianqiang, L. (2016). Numerical simulation of land subsidence and verification of its character for an iron mine using sublevel caving, International Journal of Mining Science and Technology, 26, 327-332.
• Sjoberg J. (1996) Large Scale Slope Stability in Open Pit Mining – A Review. Technical Report, Division of Rock Mechanics, Luleå University of Technology, Sweden, 215 s.
• Web:https://www.3ds.com/products-services/geovia/products/surpac/, Access date: June, 2019.
• Woo, K-S., Eberhardt, E., Elmo, D., Stead, D. (2013). Empirical investigation and characterization of surface subsidence related to block cave mining, International Journal of Rock Mechanics & Mining Sciences, 61, 31-42.
• Villegas, T., Nordlund, E., Dahnér-Lindqvist, C. (2011). Hangingwall surface subsidence at the Kiirunavaara Mine, Sweden, Engineering Geology, 121, 18-27.