Circular design strategies in interior architecture: rethinking furniture design through reuse, recycling, and waste materials
Öz
The aim of this study is to systematically examine the use of reuse, recycling, and natural or waste materials in the furniture design process in interior architecture. The research was based on systematic literature review and content analysis methods. Within the scope of the study, current publications on focal points such as "reuse," "recycling," "waste," "environmental furniture design," and "ecological approaches" were identified in the scientific literature. These publications were systematically analyzed and visualized using scientific maps. A rigorous systematic review was conducted during the literature analysis process using the PRISMA approach. The content analysis utilized VOSviewer and Biblioshiny to uncover significant themes and concepts associated with furniture design. The results highlighted key terms such as "furniture design," "wooden furniture," "recycling," "sustainability," "circular economy," "sustainable design," "wood products and waste," "recycled polypropylene," "3D printing techniques," "textile waste," "environmental impacts," interior architecture applications," "eco-design," and "green production" stand out. In conclusion, current academic publications hold considerable potential for enhancing scientific visibility and uncovering new research opportunities.
Anahtar Kelimeler
Reuse Recycle Furniture Design Waste Wood interior architecture
Teşekkür
This research was conducted as part of the Furniture Design and Construction IV course, held during the spring semester of the 2024-2025 academic year within the Department of Interior Architecture, Faculty of Art, Design, and Architecture at Fatih Sultan Mehmet Vakıf University. Acknowledgment is extended to the students for their invaluable contributions to this study. Additionally, sincere appreciation is directed toward the companies specializing in recycling, zero-waste practices, upcycling, and ecological furniture, whose expertise greatly enriched the course. Gratitude is also extended to the Environmental Protection and Control Directorate of Zeytinburnu Municipality and Istanbul Metropolitan Municipality for their thoughtful contributions and support throughout the course preparation process.
Kaynakça
- Abjaghou, H., Bourret, J., Tessier-Doyen, N., Fassier, M., Bruneaux, M. A., Lacanilao, A., and Peyratout, C., (2020). Incorporation of wooden furniture wastes in fired clay bricks for improved thermal insulation: A feasability study, Waste and Biomass Valorization, 11(12), 6943-6951, DOI:10.1007/s12649-020-00933-6
- Abu, F., Gholami, H., Saman, M. Z. M., Zakuan, N., Sharif, S., and Streimikiene, D., (2021). Pathways of lean manufacturing in wood and furniture industries: A bibliometric and systematic review, European Journal of Wood and Wood Products, 79(4), 753-772, DOI: 10.1007/s00107-021-01713-2
- Al-Saud, K., AlAli, R., Al Saud, A. M., Abouelela, A. S., Shehab, R. T., Moneim, D. A. A., and Hamid, A. E. M., (2024). Exploring the aesthetic and functional aspects of recycled furniture in promoting sustainable development: an applied approach for interior design students. Sustainability, 16(10), 4003, DOI: 10.3390/su16104003
- Afifi, A. H., (2025). Sustainable ınterior design and ıts role in promoting furniture recycling culture as an artistic approach, Arts and Architecture Journal, 6(1), 167-182, DOI: 10.21608/aaj.2025.397245.1135
- Ali, N. S., Khairuddin, N. F., and Zainal Abidin, S., (2013). Upcycling: Re-use and recreate functional interior space using waste materials. DS 76: Proceedings of EandPDE 2013, the 15th International Conference on Engineering and Product Design Education, Dublin, Ireland, 05-06.09. 2013 (pp. 798-803), DOI: 10.13140/2.1.2643.3603
- Baik, E., and Lee, M. H., (2010). Research on cases of furniture design with the idea of sustainability applied-Mainly on Lohas' 3R (Recycle, Reuse, Reduce)-. Journal of the Korea Furniture Society, 21(5), 392-402.
- Bal, B. C., Altuntaş, E., and Narlıoğlu, N., (2023). Some selected properties of composite material produced from plastic furniture waste and wood flour, Furniture and Wooden Material Research Journal, 6(2), 233-244. DOI: 10.33725/mamad.1384214
- Butdisuwan, S., Hossain, S., Zaffar, H., Amees, M., & Islam, M. S. (2024). Sustainable architecture and the role of cyber-physical systems: A bibliometric analysis. Bangladesh Journal of Multidisciplinary Scientific Research, 9(4), 39-48.
- Calabrese, M., (2012). Recycling Furniture: The ecological, economic and social benefits. Student Theses 2001-2013. 33. https://fordham.bepress.com/environ_theses/33
- Celadyn, M., (2019). Interior architectural design for adaptive reuse in application of environmental sustainability principles, Sustainability, 11(14), 3820, DOI: 10.3390/su1114 3820
- Daian, G., and Ozarska, B., (2009). Wood waste management practices and strategies to increase sustainability standards in the Australian wooden furniture manufacturing sector, Journal of Cleaner Production, 17(17), 1594-1602. DOI: 10.1016/j.jclepro.2009.07.008
- Demirel, S., and Eyüboğlu, H., (2024). A bibliometric evaluation on furniture joints studies, Turkish Journal of Forestry, 25(1), 56-63. DOI: 10.18182/tjf.1389049
- Elessawy, N. A., El Shakhs, A., El-Saka, M. F., Youssef, M. E., Youssef, B. A., and Ali, M. A. M., (2024). Sustainable and eco-friendly 3D printing filament fabricated from different recycled solid wastes and evaluate its impact on interior and furniture design, Results in Engineering, 23, 102428. DOI: 10.1016/j.rineng.2024.102428
- Ersen, N., Akyüz, İ., and Akyüz, K. C., (2024). Bibliometric analysis: an example of journal publishing on furniture and wood materials, Duzce University Journal of Science and Technology, 12(3), 1557-1571, DOI: 10.29130/dubited.1300897
- Fauzan, M., Lubis, S. M. Y., and Darmawan, S., (2022). Karakteristik komposit hdpe recycle berpenguat serat bambu untuk panel board furniture, Syntax Literate; Jurnal Ilmiah Indonesia, 7(8), 10800-10814. DOI: 10.36418/syntax-literate.v7i8.9230
- Fekry Gamal, D. (2022). Concept of circular economy in ECO-friendly furniture design, Journal of Design Sciences and Applied Arts, 3(1), 80-89. DOI: 10.21608/jdsaa.2021.101152.1140
- Galluccio, G., Deal, B., Brooks, R., Russo Ermolli, S., Rigillo, M., Perriccioli, M., ... and Bevilacqua, C., (2024). Design for resilient post-disaster wood waste upcycling. the katrina furniture project experience and ıts “legacy” in a digital perspective, Buildings, 14(7). DOI: 10.3390/buildings14072065
- Geçimli, M. (2024). Sustainable Interior Design/Architecture Researches After Sustainable Development Goals: a Bibliometric Analysis, Sanat ve Tasarım Dergisi, 14(1), 546-564, DOI: 10.20488/sanattasarim.1506512
- Gültaş, M. P., (2024). Sustainability management practices in the furniture sector: an analytical study, Furniture and Wooden Material Research Journal, 7(2), 250-265. DOI:10.33725/mamad.1568828
- Grotowska, M., Olenska, S., Gruszczynska, J., and Beer, P.,(2025). Analysis of the properties of upcycled wood waste for sustainable furniture production, Sustainability, 17(14), 6368. DOI: 10.3390/su17146368
- Haidiezul, A. H. M., Gopal, S., Aiman, A. F., Syafiq, A. M., Ishak, M. I., Shahrin, S., ... and Dahlan, N. D. (2018, November). Design and development of furniture using recycle waste materials embedded with resin. In AIP Conference Proceedings (Vol. 2030, No. 1, p. 020035). AIP Publishing LLC. DOI: 10.1063/1.5066676
- Hartini, L., Wibawa, B., Situmorang, R., and Raissa, F. (2020). Interior design of national library with environmentally sustainability materials. IOP Conference Series: Materials Science and Engineering, 1007 (1), 012004. IOP Publishing, DOI: 10.1088/1757-899X/1007/1/012004
- Hartini, S., Wicaksono, P. A., Rizal, A. M. D., and Hamdi, M. (2021, February). Integration lean manufacturing and 6R to reduce wood waste in furniture company toward circular economy. IOP conference series: materials science and engineering, 1072, (1), 012067. IOP Publishing. DOI: 10.1088/1757-899X/1072/1/012067
- Hayles, C. S. (2015). Environmentally sustainable interior design: A snapshot of current supply of and demand for green, sustainable or Fair Trade products for interior design practice, International Journal of Sustainable Built Environment, 4(1), 100-108. DOI: 10.1016/j.ijsbe.2015.03.006
- Hubbe, M. A. (2023). Reuse, a neglected "r" word in "reduce, reuse, and recycle", BioResources, 18(4), DOI: 10.15376/biores.18.4.6737-6740
- Ibrahim, N.A., and Putri, S. A. (2025). Integration of design for disassembly method using recycled mahogany material in modular furniture, Furniture and Wooden Material Research Journal, 8(1), 88-99, DOI: 10.33725/mamad.1674449
- Kim, K. B., Chung, D. S., and Jang, J. S. (2020). A study of product design using recycled materials. International Journal of Advanced Smart Convergence, 9(1), 70-81, DOI: 10.7236/IJASC.2020.9.1.70
- Knošková, Ľ., and Garasová, P. (2021). Consumer perception of product features in buying process of wooden furniture, Ad Alta: Journal of Interdisciplinary Research, 11(2). ISSN 1804-7890.
- Lähtinen, K., Alina Samaniego Vivanco, D., and Toppinen, A. (2014). Designers’ wooden furniture ecodesign implementation in Scandinavian country-of-origin (COO) branding, Journal of Product and Brand Management, 23(3), 180-191, DOI: 10.1108/JPBM-07-2013-0354
- Liu, F. (2013). Brief analysis on green design and manufacture of furniture products. Advanced Materials Research, 694, 3269-3272. DOI: 10.4028/www.scientific. net/AMR.694-697.3269
- Li, J. (2016). The use of renewable materials in interior design. In 2016 International Conference on Economics, Social Science, Arts, Education and Management Engineering (pp. 956-963). Atlantis Press. DOI: 10.2991/essaeme-16.2016.191
- Lin, C. W. R., Chen, M. T., Tseng, M. L., Chiu, A. S., and Ali, M. H. (2020). Profit maximization for waste furniture recycled in taiwan using cradle‐to‐cradle production programming, Mathematical Problems in Engineering, 2020(1), 2948049. DOI: 10.1155/2020/2948049
- Lee, S., and Buck, L. (2020). Sustainable design approaches using waste furniture materials for design students. The Design Society. Doctoral thesis, Buckinghamshire New University. DOI: 10.35199/EPDE.2020.38
- Lubonja, O., and Ovidiu, F. (2019). Use of recyclable materials in the interior design. European Journal of Economics and Business Studies, 5(2), 79-100, DOI: 10.26417/ejes.v5i2.p79-100
- Marsahala, P., Nediari, A., and Roesli, C. (2023). Exploring Indonesia’s recycled-plastic waste material in ınterior design for sustainable ınterior eco-planning. IOP Conference Series: Earth and Environmental Science, 1169, (1), 012049, IOP Publishing. DOI: 10.1088/1755-1315/1169/1/012049
- Máté, K. (2007). Using materials for sustainability in interior architecture and design, Journal of Green Building, 2(4), 23-38, DOI: 10.3992/jgb.2.4.23
- Md Razali, A. S. (2016). Furniture design: Coffee table using recycle materials (solid wood waste), FurnitureTechnology Faculty of Applied Sciences, Universiti Technologi MARA https://ir.uitm.edu.my/id/eprint/22717/
- Muhammad Suandi, M. E., Amlus, M. H., Hemdi, A. R., Abd Rahim, S. Z., Ghazali, M. F., and Rahim, N. L. (2022). A review on sustainability characteristics development for wooden furniture design, Sustainability, 14(14), 8748. DOI: 10.3390/su14148748
- Munteanu, A. (2021). Eco-design. Furniture made of recycling materials-a new concept for the contemporan design, Journal of Social Sciences, 4(3), 60-70, DOI: 10.52326/jss.utm.20 21.4(3).07
- Mrinalini, A., Sasidhar, K., and Jayanthi, D. (2023). Study on the application of reuse and recyclable materials in designing the regional commercial interior spaces. IOP Conference Series: Earth and Environmental Science, 1210 (1), 012019, IOP Publishing. DOI: 10.1088/1755-1315/1210/1/012019
- Ofori-Agyei, G. O., Baah, O. P. K., Adom, D., Amankwa, J. O., and Abedi, A. (2023). Upcycling of solid waste for furniture production: an environmentally sustainable solution for waste disposal, Journal of Innovations and Sustainability, 7(4), 04-04, DOI: 10.51599/is.2023.07.04.04
- Ouyang, C., and Wu, K. Y. (2015). A DFA-Based Wood Frame furniture design using quality function deployment: a case study in school open spaces. In International Conference on Chemical, Material and Food Engineering, pp. 517-520. Atlantis Press. DOI: 10.2991/cmfe-15.2015.121
- Pralat, B., Owsian, A., and Rogozinski, T. (2024). Reducing, reusing, and recycling in the furniture industry: A mini-review, Global Forest Journal, 2(02), 161-168, DOI: 10.32734/gfj.v2i02.16731
- Pringle, A. M., Rudnicki, M., and Pearce, J. M. (2018). Wood furniture waste–based recycled 3-D printing filament, Forest Products Journal, 68(1), 86-95. DOI: 10.13073/FPJ-D-17-00042
- PRISMA (2020). PRISMA flow diagram. https://www.prisma-statement.org/prisma-2020-flow-diagram
- Ramadan, M. E. (2023). Benefiting from recycled waste in furniture manufacturing to realize environmental sustainability, International Design Journal, 13(6), 21-31, DOI: 10.21608/ idj.2023.317931
- Ridwan, A. A. D., Setiawan, F., Saragih, H. D. G., Aminnulloh, M. N., and Satiadhi, P. P. G. (2021). Factors affecting consumers' ıntention to purchase environmentally friendly products: recycle furnitures, JRB-Jurnal Riset Bisnis, 5(1), 99-109, DOI: 10.35814/jrb. v5i1.2736
- Sari, D. P., Afifah Mahdiyah, A. S. A., and Purwaningsih, R. (2025). Assessing environmental impact and eco-efficiency of wood waste gallon holders using life cycle assessment, Journal of Ecological Engineering, 26(3), DOI: 10.12911/22998993/199727
- Sofiana, Y., and Fajarwati, A. A. (2018). Environmentally friendly material characteristics applied to interior and furniture, In 3rd International Conference on Creative Media, Design and Technology (REKA 2018) (pp. 235-237). Atlantis Press. DOI: 10.2991/reka-18.2018.53
- Susanty, A., Sari, D. P., Budiawan, W., and Kurniawan, H., (2016). Improving green supply chain management in furniture industry through internet based geographical information system for connecting the producer of wood waste with buyer, Procedia Computer Science, 83, 734-741. DOI: 10.1016/j.procs.2016.04.161
- Sydor, M., Kwapich, A., Lira, J., and Langová, N., (2022). Bibliometric study of the cooperation in the engineering and scientific publications related to furniture design, Drewno. Prace Naukowe. Doniesienia. Komunikaty, 65(209). DOI: 10.12841/wood.1644-3985.389.05
- Trela, W. N., (2017). Ecological Materials for Interior Design Use: Impact of Wood and Recycling Materials, for People Lives and the Environment (Master's thesis, Universidade de Lisboa (Portugal)). https://repositorio.ulisboa.pt/handle/10451/35128
- VOSviewer (2025). Visualizing Scientific Landscapes. https://www.vosviewer.com/
- Xue, G., and Chen, J., (2024). Strategies for applying shape grammar to wooden furniture design: Taking traditional Chinese Ming-style recessed-leg table as an example, BioResources, 19(1), 1707. DOI: 10.15376/biores.19.1.1707-1727
- Wang, Y., Liu, C., Zhang, X., and Zeng, S., (2023). Research on sustainable furniture design based on waste textiles recycling, Sustainability, 15(4), 3601, DOI: 10.3390/su15043601 Wastepresso (2025). https://www.wastespresso.com/
- Yang, D., and Zhu, J., (2021). Recycling and value-added design of discarded wooden furniture, BioResources, 16(4). DOI: 10.15376/biores.16.4.6954-6964
- Yousef, D. M. K., and Alqandi, H. A., (2018). Recycled products in the realm of furniture and ınterior design in Kuwait. International Design Journal, 8(3), 289-297. DOI: 10.21608/idj.2018.85514
- Zhang, Z., Zhu, J., and Qi, Q., (2023). Research on the recyclable design of wooden furniture based on the recyclability evaluation, Sustainability, 15(24), 16758, DOI: 10.3390/su152416758
- Zhang, H. Y. (2011). Rational consideration on package design of wooden furniture, Advanced Materials Research, 211, 250-253, DOI: 10.4028/www.scientific.net/ AMR.211-212.250
- Zheng, W., Zhong, S., and Xiong, X. (2025). Measures and suggestions for recycling and reuse of waste wooden furniture, Wood Material Science and Engineering, 1-9, DOI: 10.1080/17480272.2025.2514218
- Zhu, L., Yan, Y., and Lv, J. (2023). A bibliometric analysis of current knowledge structure and research progress related to sustainable furniture design systems. Sustainability, 15(11), 8622, DOI: 10.3390/su15118622
İç mimarlıkta döngüsel tasarım stratejileri: yeniden kullanım, geri dönüşüm ve atık malzemelerle mobilya tasarımı yeniden düşünmek
Öz
Bu çalışmanın amacı, iç mimarlıkta mobilya tasarım sürecinde yeniden kullanım, geri dönüşüm ve doğal veya atık malzemelerin kullanımını sistematik olarak incelemektir. Araştırma, sistematik literatür taraması ve içerik analizi yöntemlerine dayanmaktadır. Çalışma kapsamında, bilimsel literatürde "yeniden kullanım", "geri dönüşüm", "atık", "çevre dostu mobilya tasarımı" ve "ekolojik yaklaşımlar" gibi odak noktalarına ilişkin güncel yayınlar belirlenmiştir. Bu yayınlar sistematik olarak analiz edilmiş ve bilimsel haritalar kullanılarak görselleştirilmiştir. Literatür analizi sürecinde, PRISMA yaklaşımı kullanılarak titiz bir sistematik inceleme yürütülmüştür. İçerik analizi, mobilya tasarımıyla ilgili önemli temaları ve kavramları ortaya çıkarmak için VOSviewer ve Biblioshiny araçlarını kullandı. Bulgulara göre, mobilya tasarımıyla ilgili çeşitli temalar ve kavramlar öne çıkmaktadır. Sonuçlar "mobilya tasarımı", "ahşap mobilya", "geri dönüşüm", "sürdürülebilirlik", "döngüsel ekonomi", "sürdürülebilir tasarım", "ahşap ürünler ve atıklar", "geri dönüştürülmüş polipropilen", "3B baskı teknikleri", "tekstil atıkları", "çevresel etkiler "iç mimarlık uygulamaları", "eko-tasarım" ve "yeşil üretim" gibi önemli anahtar kelimeler öne çıkmaktadır. Sonuç olarak, güncel akademik yayınlar, bilimsel görünürlüğü artırma ve yeni araştırma fırsatlarını ortaya çıkarma konusunda önemli bir potansiyele sahiptir.
Anahtar Kelimeler
Yeniden Kullanım Geri Dönüşüm Mobilya Tasarımı Atık Ahşap iç mimarlık
Teşekkür
This study was conducted with students of Fatih Sultan Mehmet Vakıf University, Faculty of Art, Design and Architecture, Department of Interior Architecture, 2024-2025 Spring semester Furniture Design and Construction IV course. I would like to thank my students, whose furniture presentations and furniture images I examined in the article, Murat Selim Günay, Sude Sena Bayram, Gamze Durusoy Cerlek, İrem Şişman, Abdül Samed Dalmaz, Tunahan Sert, Zeynep Zar, Rumeysa Engin, Safiye Ebrar Binici. We extend our sincere gratitude to the students. We are also grateful to the companies working on recycling, zero waste, upcycling, and ecological furniture, as well as the Environmental Protection and Control Directorate of Zeytinburnu Municipality and Istanbul Metropolitan Municipality, for whom we received information during the course preparation process.
Kaynakça
- Abjaghou, H., Bourret, J., Tessier-Doyen, N., Fassier, M., Bruneaux, M. A., Lacanilao, A., and Peyratout, C., (2020). Incorporation of wooden furniture wastes in fired clay bricks for improved thermal insulation: A feasability study, Waste and Biomass Valorization, 11(12), 6943-6951, DOI:10.1007/s12649-020-00933-6
- Abu, F., Gholami, H., Saman, M. Z. M., Zakuan, N., Sharif, S., and Streimikiene, D., (2021). Pathways of lean manufacturing in wood and furniture industries: A bibliometric and systematic review, European Journal of Wood and Wood Products, 79(4), 753-772, DOI: 10.1007/s00107-021-01713-2
- Al-Saud, K., AlAli, R., Al Saud, A. M., Abouelela, A. S., Shehab, R. T., Moneim, D. A. A., and Hamid, A. E. M., (2024). Exploring the aesthetic and functional aspects of recycled furniture in promoting sustainable development: an applied approach for interior design students. Sustainability, 16(10), 4003, DOI: 10.3390/su16104003
- Afifi, A. H., (2025). Sustainable ınterior design and ıts role in promoting furniture recycling culture as an artistic approach, Arts and Architecture Journal, 6(1), 167-182, DOI: 10.21608/aaj.2025.397245.1135
- Ali, N. S., Khairuddin, N. F., and Zainal Abidin, S., (2013). Upcycling: Re-use and recreate functional interior space using waste materials. DS 76: Proceedings of EandPDE 2013, the 15th International Conference on Engineering and Product Design Education, Dublin, Ireland, 05-06.09. 2013 (pp. 798-803), DOI: 10.13140/2.1.2643.3603
- Baik, E., and Lee, M. H., (2010). Research on cases of furniture design with the idea of sustainability applied-Mainly on Lohas' 3R (Recycle, Reuse, Reduce)-. Journal of the Korea Furniture Society, 21(5), 392-402.
- Bal, B. C., Altuntaş, E., and Narlıoğlu, N., (2023). Some selected properties of composite material produced from plastic furniture waste and wood flour, Furniture and Wooden Material Research Journal, 6(2), 233-244. DOI: 10.33725/mamad.1384214
- Butdisuwan, S., Hossain, S., Zaffar, H., Amees, M., & Islam, M. S. (2024). Sustainable architecture and the role of cyber-physical systems: A bibliometric analysis. Bangladesh Journal of Multidisciplinary Scientific Research, 9(4), 39-48.
- Calabrese, M., (2012). Recycling Furniture: The ecological, economic and social benefits. Student Theses 2001-2013. 33. https://fordham.bepress.com/environ_theses/33
- Celadyn, M., (2019). Interior architectural design for adaptive reuse in application of environmental sustainability principles, Sustainability, 11(14), 3820, DOI: 10.3390/su1114 3820
- Daian, G., and Ozarska, B., (2009). Wood waste management practices and strategies to increase sustainability standards in the Australian wooden furniture manufacturing sector, Journal of Cleaner Production, 17(17), 1594-1602. DOI: 10.1016/j.jclepro.2009.07.008
- Demirel, S., and Eyüboğlu, H., (2024). A bibliometric evaluation on furniture joints studies, Turkish Journal of Forestry, 25(1), 56-63. DOI: 10.18182/tjf.1389049
- Elessawy, N. A., El Shakhs, A., El-Saka, M. F., Youssef, M. E., Youssef, B. A., and Ali, M. A. M., (2024). Sustainable and eco-friendly 3D printing filament fabricated from different recycled solid wastes and evaluate its impact on interior and furniture design, Results in Engineering, 23, 102428. DOI: 10.1016/j.rineng.2024.102428
- Ersen, N., Akyüz, İ., and Akyüz, K. C., (2024). Bibliometric analysis: an example of journal publishing on furniture and wood materials, Duzce University Journal of Science and Technology, 12(3), 1557-1571, DOI: 10.29130/dubited.1300897
- Fauzan, M., Lubis, S. M. Y., and Darmawan, S., (2022). Karakteristik komposit hdpe recycle berpenguat serat bambu untuk panel board furniture, Syntax Literate; Jurnal Ilmiah Indonesia, 7(8), 10800-10814. DOI: 10.36418/syntax-literate.v7i8.9230
- Fekry Gamal, D. (2022). Concept of circular economy in ECO-friendly furniture design, Journal of Design Sciences and Applied Arts, 3(1), 80-89. DOI: 10.21608/jdsaa.2021.101152.1140
- Galluccio, G., Deal, B., Brooks, R., Russo Ermolli, S., Rigillo, M., Perriccioli, M., ... and Bevilacqua, C., (2024). Design for resilient post-disaster wood waste upcycling. the katrina furniture project experience and ıts “legacy” in a digital perspective, Buildings, 14(7). DOI: 10.3390/buildings14072065
- Geçimli, M. (2024). Sustainable Interior Design/Architecture Researches After Sustainable Development Goals: a Bibliometric Analysis, Sanat ve Tasarım Dergisi, 14(1), 546-564, DOI: 10.20488/sanattasarim.1506512
- Gültaş, M. P., (2024). Sustainability management practices in the furniture sector: an analytical study, Furniture and Wooden Material Research Journal, 7(2), 250-265. DOI:10.33725/mamad.1568828
- Grotowska, M., Olenska, S., Gruszczynska, J., and Beer, P.,(2025). Analysis of the properties of upcycled wood waste for sustainable furniture production, Sustainability, 17(14), 6368. DOI: 10.3390/su17146368
- Haidiezul, A. H. M., Gopal, S., Aiman, A. F., Syafiq, A. M., Ishak, M. I., Shahrin, S., ... and Dahlan, N. D. (2018, November). Design and development of furniture using recycle waste materials embedded with resin. In AIP Conference Proceedings (Vol. 2030, No. 1, p. 020035). AIP Publishing LLC. DOI: 10.1063/1.5066676
- Hartini, L., Wibawa, B., Situmorang, R., and Raissa, F. (2020). Interior design of national library with environmentally sustainability materials. IOP Conference Series: Materials Science and Engineering, 1007 (1), 012004. IOP Publishing, DOI: 10.1088/1757-899X/1007/1/012004
- Hartini, S., Wicaksono, P. A., Rizal, A. M. D., and Hamdi, M. (2021, February). Integration lean manufacturing and 6R to reduce wood waste in furniture company toward circular economy. IOP conference series: materials science and engineering, 1072, (1), 012067. IOP Publishing. DOI: 10.1088/1757-899X/1072/1/012067
- Hayles, C. S. (2015). Environmentally sustainable interior design: A snapshot of current supply of and demand for green, sustainable or Fair Trade products for interior design practice, International Journal of Sustainable Built Environment, 4(1), 100-108. DOI: 10.1016/j.ijsbe.2015.03.006
- Hubbe, M. A. (2023). Reuse, a neglected "r" word in "reduce, reuse, and recycle", BioResources, 18(4), DOI: 10.15376/biores.18.4.6737-6740
- Ibrahim, N.A., and Putri, S. A. (2025). Integration of design for disassembly method using recycled mahogany material in modular furniture, Furniture and Wooden Material Research Journal, 8(1), 88-99, DOI: 10.33725/mamad.1674449
- Kim, K. B., Chung, D. S., and Jang, J. S. (2020). A study of product design using recycled materials. International Journal of Advanced Smart Convergence, 9(1), 70-81, DOI: 10.7236/IJASC.2020.9.1.70
- Knošková, Ľ., and Garasová, P. (2021). Consumer perception of product features in buying process of wooden furniture, Ad Alta: Journal of Interdisciplinary Research, 11(2). ISSN 1804-7890.
- Lähtinen, K., Alina Samaniego Vivanco, D., and Toppinen, A. (2014). Designers’ wooden furniture ecodesign implementation in Scandinavian country-of-origin (COO) branding, Journal of Product and Brand Management, 23(3), 180-191, DOI: 10.1108/JPBM-07-2013-0354
- Liu, F. (2013). Brief analysis on green design and manufacture of furniture products. Advanced Materials Research, 694, 3269-3272. DOI: 10.4028/www.scientific. net/AMR.694-697.3269
- Li, J. (2016). The use of renewable materials in interior design. In 2016 International Conference on Economics, Social Science, Arts, Education and Management Engineering (pp. 956-963). Atlantis Press. DOI: 10.2991/essaeme-16.2016.191
- Lin, C. W. R., Chen, M. T., Tseng, M. L., Chiu, A. S., and Ali, M. H. (2020). Profit maximization for waste furniture recycled in taiwan using cradle‐to‐cradle production programming, Mathematical Problems in Engineering, 2020(1), 2948049. DOI: 10.1155/2020/2948049
- Lee, S., and Buck, L. (2020). Sustainable design approaches using waste furniture materials for design students. The Design Society. Doctoral thesis, Buckinghamshire New University. DOI: 10.35199/EPDE.2020.38
- Lubonja, O., and Ovidiu, F. (2019). Use of recyclable materials in the interior design. European Journal of Economics and Business Studies, 5(2), 79-100, DOI: 10.26417/ejes.v5i2.p79-100
- Marsahala, P., Nediari, A., and Roesli, C. (2023). Exploring Indonesia’s recycled-plastic waste material in ınterior design for sustainable ınterior eco-planning. IOP Conference Series: Earth and Environmental Science, 1169, (1), 012049, IOP Publishing. DOI: 10.1088/1755-1315/1169/1/012049
- Máté, K. (2007). Using materials for sustainability in interior architecture and design, Journal of Green Building, 2(4), 23-38, DOI: 10.3992/jgb.2.4.23
- Md Razali, A. S. (2016). Furniture design: Coffee table using recycle materials (solid wood waste), FurnitureTechnology Faculty of Applied Sciences, Universiti Technologi MARA https://ir.uitm.edu.my/id/eprint/22717/
- Muhammad Suandi, M. E., Amlus, M. H., Hemdi, A. R., Abd Rahim, S. Z., Ghazali, M. F., and Rahim, N. L. (2022). A review on sustainability characteristics development for wooden furniture design, Sustainability, 14(14), 8748. DOI: 10.3390/su14148748
- Munteanu, A. (2021). Eco-design. Furniture made of recycling materials-a new concept for the contemporan design, Journal of Social Sciences, 4(3), 60-70, DOI: 10.52326/jss.utm.20 21.4(3).07
- Mrinalini, A., Sasidhar, K., and Jayanthi, D. (2023). Study on the application of reuse and recyclable materials in designing the regional commercial interior spaces. IOP Conference Series: Earth and Environmental Science, 1210 (1), 012019, IOP Publishing. DOI: 10.1088/1755-1315/1210/1/012019
- Ofori-Agyei, G. O., Baah, O. P. K., Adom, D., Amankwa, J. O., and Abedi, A. (2023). Upcycling of solid waste for furniture production: an environmentally sustainable solution for waste disposal, Journal of Innovations and Sustainability, 7(4), 04-04, DOI: 10.51599/is.2023.07.04.04
- Ouyang, C., and Wu, K. Y. (2015). A DFA-Based Wood Frame furniture design using quality function deployment: a case study in school open spaces. In International Conference on Chemical, Material and Food Engineering, pp. 517-520. Atlantis Press. DOI: 10.2991/cmfe-15.2015.121
- Pralat, B., Owsian, A., and Rogozinski, T. (2024). Reducing, reusing, and recycling in the furniture industry: A mini-review, Global Forest Journal, 2(02), 161-168, DOI: 10.32734/gfj.v2i02.16731
- Pringle, A. M., Rudnicki, M., and Pearce, J. M. (2018). Wood furniture waste–based recycled 3-D printing filament, Forest Products Journal, 68(1), 86-95. DOI: 10.13073/FPJ-D-17-00042
- PRISMA (2020). PRISMA flow diagram. https://www.prisma-statement.org/prisma-2020-flow-diagram
- Ramadan, M. E. (2023). Benefiting from recycled waste in furniture manufacturing to realize environmental sustainability, International Design Journal, 13(6), 21-31, DOI: 10.21608/ idj.2023.317931
- Ridwan, A. A. D., Setiawan, F., Saragih, H. D. G., Aminnulloh, M. N., and Satiadhi, P. P. G. (2021). Factors affecting consumers' ıntention to purchase environmentally friendly products: recycle furnitures, JRB-Jurnal Riset Bisnis, 5(1), 99-109, DOI: 10.35814/jrb. v5i1.2736
- Sari, D. P., Afifah Mahdiyah, A. S. A., and Purwaningsih, R. (2025). Assessing environmental impact and eco-efficiency of wood waste gallon holders using life cycle assessment, Journal of Ecological Engineering, 26(3), DOI: 10.12911/22998993/199727
- Sofiana, Y., and Fajarwati, A. A. (2018). Environmentally friendly material characteristics applied to interior and furniture, In 3rd International Conference on Creative Media, Design and Technology (REKA 2018) (pp. 235-237). Atlantis Press. DOI: 10.2991/reka-18.2018.53
- Susanty, A., Sari, D. P., Budiawan, W., and Kurniawan, H., (2016). Improving green supply chain management in furniture industry through internet based geographical information system for connecting the producer of wood waste with buyer, Procedia Computer Science, 83, 734-741. DOI: 10.1016/j.procs.2016.04.161
- Sydor, M., Kwapich, A., Lira, J., and Langová, N., (2022). Bibliometric study of the cooperation in the engineering and scientific publications related to furniture design, Drewno. Prace Naukowe. Doniesienia. Komunikaty, 65(209). DOI: 10.12841/wood.1644-3985.389.05
- Trela, W. N., (2017). Ecological Materials for Interior Design Use: Impact of Wood and Recycling Materials, for People Lives and the Environment (Master's thesis, Universidade de Lisboa (Portugal)). https://repositorio.ulisboa.pt/handle/10451/35128
- VOSviewer (2025). Visualizing Scientific Landscapes. https://www.vosviewer.com/
- Xue, G., and Chen, J., (2024). Strategies for applying shape grammar to wooden furniture design: Taking traditional Chinese Ming-style recessed-leg table as an example, BioResources, 19(1), 1707. DOI: 10.15376/biores.19.1.1707-1727
- Wang, Y., Liu, C., Zhang, X., and Zeng, S., (2023). Research on sustainable furniture design based on waste textiles recycling, Sustainability, 15(4), 3601, DOI: 10.3390/su15043601 Wastepresso (2025). https://www.wastespresso.com/
- Yang, D., and Zhu, J., (2021). Recycling and value-added design of discarded wooden furniture, BioResources, 16(4). DOI: 10.15376/biores.16.4.6954-6964
- Yousef, D. M. K., and Alqandi, H. A., (2018). Recycled products in the realm of furniture and ınterior design in Kuwait. International Design Journal, 8(3), 289-297. DOI: 10.21608/idj.2018.85514
- Zhang, Z., Zhu, J., and Qi, Q., (2023). Research on the recyclable design of wooden furniture based on the recyclability evaluation, Sustainability, 15(24), 16758, DOI: 10.3390/su152416758
- Zhang, H. Y. (2011). Rational consideration on package design of wooden furniture, Advanced Materials Research, 211, 250-253, DOI: 10.4028/www.scientific.net/ AMR.211-212.250
- Zheng, W., Zhong, S., and Xiong, X. (2025). Measures and suggestions for recycling and reuse of waste wooden furniture, Wood Material Science and Engineering, 1-9, DOI: 10.1080/17480272.2025.2514218
- Zhu, L., Yan, Y., and Lv, J. (2023). A bibliometric analysis of current knowledge structure and research progress related to sustainable furniture design systems. Sustainability, 15(11), 8622, DOI: 10.3390/su15118622
Ayrıntılar
| Birincil Dil | İngilizce |
|---|---|
| Konular | Malzeme Mühendisliği (Diğer) |
| Bölüm | Derleme |
| Yazarlar | |
| Gönderilme Tarihi | 10 Ağustos 2025 |
| Kabul Tarihi | 2 Aralık 2025 |
| Erken Görünüm Tarihi | 13 Aralık 2025 |
| Yayımlanma Tarihi | 16 Aralık 2025 |
| Yayımlandığı Sayı | Yıl 2025 Cilt: 8 Sayı: 2 |
Amaç ve Kapsam
Mobilya ve Ahşap Malzeme Araştırmaları Dergisi (MAMAD), mobilya konusunu ön planda tutarak Dergi Park üzerinde yayın hayatına başlayan ilk akademik dergidir. Bu nedenle, bu alanda çalışma yapan araştırmacılara, mobilya ve ahşap malzeme ile ilgili olan tüm okuyuculara hizmet sunmayı amaçlamaktadır.
Açık erişim ve Uluslararası hakemli dergidir.
Mobilya ve Ahşap Malzeme Araştırmaları Dergisi; mobilya mekaniği, mobilya üst yüzey işlemleri, mobilya üretiminde kalite kontrol, mobilya ithalat ve ihracatı, bilgisayar destekli mobilya tasarımı, bilgisayar destekli mobilya üretimi konularında hazırlanan çalışmalara yer verecektir. Ayrıca, masif ahşap malzeme, ahşap esaslı kompozit malzemeler, odun plastik kompozit malzemeler, ahşap malzemenin işlenmesi, ahşap malzemenin güçlendirilmesi, ahşap malzemenin korunması, ahşap malzemenin modifikasyonu, ahşap malzemenin fiziksel, kimyasal, mekanik ve diğer teknolojik özelliklerini içeren araştırmalarda dergi kapsamındadır. Kâğıt ve kağıt hamuru üzerine yapılan çalışmalar derginin kapsamı dışındadır. Dergi, araştırma ve derleme türündeki olan makaleleri yayınlamaktadır. Diğer türlerde hazırlanan makaleleri kabul etmemektedir.
Yazım Kuralları
Makale,dergi ana sayfasından veya buradan indirilecek MAMAD şablon dosya 2025 'e göre hazırlanmalı ve copyright transfer form 2025 imzalanarak sisteme yüklenmelidir.
Makalenin sorumlu yazarı aşağıdaki kuralları uygulamalıdır.
1. Her yazarın ORCID ID verilmelidir.
2. Makale başlıkları (Türkçe ve İngilizce başlık), sayfada ortalı, 14 punto ve koyu yazılmalıdır (Bold).
3. Yazar İsimleri 12 Punto ve sadece ilk harfler büyük, normal yazılmalıdır (Bold değil).
4. Makale ilk sayfasında “Öz” ve “Abstract” konumu doğru ve bu kelimeler koyu yazılmalıdır (Bold)
5. Öz ve Abstract en az 150 ve en fazla 180 kelime olarak yazılmalıdır.
6. Anahtar kelimeler en az 3 en fazla 5 kelime verilmelidir.
7. Makale maksimum sayfa sayısı 16'dır.
8. Makale ilk sayfasının alt bilgi kısmında yazar bilgileri ve atıf bilgisi verilmelidir.
9. İlk sayfa alt bilgide satırlar alt çizgi ile ayrılmalıdır. (Örnek)
10. Giriş kısmına, makalenin ikinci sayfasından başlanmalıdır. Giriş kısmının son paragrafında çalışmanın amacı net olarak verilmelidir (Bu çalışmanın amacı...........dır).
11. Başlık numaralandırması doğru olarak verilmelidir.
12. Yazı stili "Times new roman" ve büyüklüğü "12 punto" yapılmalıdır (Makale başlıkları hariç). Çizelge içeriği, sığdırmak için 8 puntoya kadar küçültülebilir.
13. İtalik yazılması gereken ifadeler italik yapılmalıdır.
14. Paragraf başı girinti miktarları 0,5 cm ve paragraflar arası 6 nk yapılmalıdır.
15. Makalenin tüm bölümlerinde satır aralığı 1 olmalıdır.
16. Sayfa kenar boşlukları üstten ve alttan 3, diğer kenarlardan 2.5 yapılmalıdır.
17. Metin içinde yapılan atıflar doğru verilmelidir (Ali, Ayşe, Can,..1999 yanlış) (Ali ve ark., 1999 doğru) (Ali vd., 1999 yanlış).
18. Metin içinde aynı parantez içinde verilen atıflar arası noktalı virgül “;” kullanılmalıdır.
19. Formüller ve numaraları doğru verilmelidir. Formüller resim formatında verilmemelidir.
20. Şekil ve çizelge numaraları sırası doğru verilmelidir.
21. Şekil ve Çizelge başlıklarında Şekil 1 ve Çizelge 1 kelimeleri koyu (bold) verilmelidir.
22. Şekil ve Çizelge başlıkları soldan içerde verilmemelidir (paragraf girintisi 0).
23. Her şekil ve çizelgeye atıf yapılmalıdır.
24. Şekil ve çizelgeler ortalı konumda olmalıdır.
25. Şekillerde başlık alta ve çizelgelerde başlık üste yazılmalıdır.
26. Sonuçlar kısmı maddeler halinde verilmelidir.
27. Gerekli ise, teşekkür kısmı ve varsa proje numarası verilmelidir.
28. Metin içerisinde ve çizelge içeriğindeki rakamlarda ondalık ayırıcı nokta olarak verilmelidir.
29. Kaynaklarda “and” ifadesi ve “ve” ifadesi kullanılmalıdır (Örnek: Babiak, M., and Kúdela, J. Bal B.C., ve Efe F.T.)
30. Kaynaklar listesinde, yazar isimleri nokta ve virgül ile (Bal B.C.,), yıl parantez içinde (1999). parantezden sonra “.” ifadesi ile, sayı numarasından sonra parantezi takiben virgül “2(3), 25-35” sayfa numaraları arası tire (-) ifadesi ile, her bir kaynak satırı arasında 6 nk boşluk ile yazılmalıdır. Dergi, kitap ve tez isimleri italik yazılmalıdır. Kaynak bildiri ise tamamı dik yazılmalıdır. Kaynak çalışmanın ilk harfi hariç küçük harf olarak verilmelidir. Dergi isimleri tam veya kıda adı verilebilir. Atıf yapılan makalenin varsa DOI numarası verilmelidir.
31. Metin ve çizelgeler içindeki rakamların ayıracı nokta olmalıdır. (12.23 doğru, 12,23 yanlış)
Örnek kaynak gösterimi:
Bal, B. C., (2012). Genç odun ve olgun odunun lif morfolojisindeki farklılıklar üzerine bir araştırma, Düzce Üniversitesi Ormancılık Dergisi, 8(2), 29-35, DOI:....
Çavuş, V., ve Ayata, Ü., (2018). Manolya ağacı, akçaağaç ve tespih ağacı odunlarında vida tutma direnci üzerine bir araştırma. MAMAD, 1(2), 94-102, DOI:.... 10.33725/mamad.496615.
Bal, B.C., ve Kaba, O., (2019). Kahramanmaraş ilindeki ahşap oyma atölyelerinin üretim miktarları üzerine bir araştırma. III. International Mediterranean Forest and Environment Symposium (IMFES2019), 3-5.Ekim.2019, Bildiriler kitabı S:520-524, Kahramanmaraş/ Türkiye.
Omatça, İ., (2006). Ahşabın, oyuncak üretiminde kullanımı ve önemi, Dumlupınar Üniversitesi, Simav Teknik Eğitim Fakültesi, Mobilya ve Dekorasyon Eğitimi Bölümü, Lisans tezi.
ASTM 1761, (2012). Standart test methods for mechanical fasteners in wood,. ASTM International, West Conshohocken, Philadelphia.
Bal, B.C., and Bektaş, İ., (2012). The physical properties of heartwood and sapwood of Eucalyptus grandis, ProLigno, 8 (4), 35-43.
Bal, B.C., ve Altuntaş, E., (2013). Masif ağaç malzeme ve tabakalı kaplama kerestenin vida tutma direnci üzerine karşılaştırmalı bir çalışma, Düzce University journal of forestry, 9(2),14-22.
Bozkurt, Y., Göker, Y., ve Erdin, N., (1993). Emprenye tekniği, İstanbul Üniversitesi, Orman Fakültesi Yayınları, No 425, İstanbul,1993.
Çolak, S., Aydın, İ., ve Çolakoǧlu, G., (2003). Okaliptüs (E. camaldulensis) ağacının farklı yüksekliklerinden alınan tomruklardan üretilmiş kontrplakların bazı mekanik özellikleri, Doğu Akdeniz Ormancılık Araştırma Dergisi, 9, 95–111.
Çolak, G., (2024). Ahşap-plastik kompozitlerin endüstriyel üretim sürecine ilişkin yaşam döngüsü çevresel sürdürülebilirlik analizi, Bilecik Şeyh Edebali University, Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, Bilecik, Türkiye.
DeCristoforo, R.J., (1988). The complete book of stationary power tool techniques. Sterling Publishing Co., Inc. Two Park Avenue, New York, N. Y. 388p
Gaff, M., Vokaty, V., Babiak, M., and Bal. B.C., (2016). Coefficient of wood bendability as a function of selected factors, Construction and Building Materials, 126 (2016), 630-640, DOI: 10.1016/j.conbuildmat.2016.09.085
Rammer, D. R., (2010). Fastenings,wood handbook: wood as an engineering material, USDA Forest Service, Forest Products Laboratory, General Technical Report FPL-GTR-190, Madison, WI (ss. 1–2).
TS 2478, (1976). Odunun statik eğilmede elastiklik modülünün tayini. türk standartları enstitüsü, Ankara.
URL-1, (2020). George III period satinwood work table, 1stDIBS, http://www.onlinegalleries.com/art-and-antiques (last access: 19.02.2020)
Yıldırım, M. N, Karaman, A., and Akınay, A., (2016). Finite element method application of wooden furniture, International conference on research in education science, 19 - 22 Mayıs 2016, ss.1258-1270, Muğla/Türkiye,
Etik İlkeler ve Yayın Politikası
• strive to meet the needs of readers and authors.
• strive to improve their journal constantly;
• have processes in place to ensure the quality of the material they publish;
• champion freedom of expression;
• maintain the integrity of the academic record;
• preclude business needs from compromising intellectual and ethical standards;
• be willing to publish corrections, clarifications, retractions, and apologies when needed.
• Editors of the Furniture and Wooden Material Research Journal are accountable for everything published in the journal. This means the editors should
strive to meet the needs of readers and authors.
• strive to improve their journal constantly;
• have processes in place to ensure the quality of the material they publish;
• champion freedom of expression;
• maintain the integrity of the academic record;
• preclude business needs from compromising intellectual and ethical standards;
• be willing to publish corrections, clarifications, retractions, and apologies when needed.
The editor and any editorial staff must not disclose any information about a submitted manuscript to anyone other than the corresponding author, reviewers, potential reviewers, other editorial advisers, and the publisher, as appropriate.
Disclosure and conflicts of interest
Unpublished materials disclosed in a submitted paper will not be used by the editor or the editorial board members for research purposes without the author's explicit written consent.
When an author discovers a significant error or inaccuracy in his/her own published work, the author must notify the journal editor or publisher promptly and cooperate with the editor to retract or correct the paper in the form of an erratum.
PUBLICATION POLICY
1. Copyright Transfer principles: All authors must sign the form. It is mandatory to have the signature of the corresponding author on the form. In case the signatures of the other author/authors cannot be reached due to inaccessibility, the correspondence author accepts the responsibility of the related author/authors. The submitted article must not be published elsewhere or under review in any journal for publication. All authors mentioned in the article have seen and approved the submitted article. The journal is not responsible for problems such as the order of names that may occur between authors. The article has been prepared in accordance with the spelling rules specified by the journal. As the author(s) of the article, we accept that we have waived the article's copyright, transferred this right to the Furniture and Wooden Material Research Journal, and authorized Furniture and Wooden Material Research Journal to publish the article. Article author(s) accept that all texts, figures, graphics, photographs, and charts given in the article belong to the authors of the article and that any information received from other researchers is made by citing the source within the framework of ethical rules, and that the author(s) of the article is responsible for any issue that constitutes an ethical crime.
2. Furniture and Wooden Material Research Journal has agreed to comply with the COPE Code of Conduct provisions for Journal Editors. All journal-related activities are to be carried out according to these rules.
3. The journal publishes two annual issues and does not publish special issues or additional issues.
4. Furniture and Wooden Material Research Journal is an international, peer-reviewed, and open-access journal that does not charge an article processing fee, evaluation fee, printing fee, or any other fee for articles.
6. Personal information such as names, e-mail addresses, and telephone numbers entered in the management system of Furniture and Wood Materials Research Journal will only be used for the scientific purposes of this journal, in accordance with the Privacy Statement.
7. All articles published in Furniture and Wooden Material Research Journal are archived and stored in pdf format through TÜBİTAK-ULAKBİM, Life Sciences Database.
8. Furniture and Wooden Materials Research Journal does not accept advertisements.
9. Furniture and Wooden Material Research Journal evaluates with a double-blind peer review process.
10. The articles sent to the Furniture and Wooden Material Research Journal are first evaluated by the editor-in-chief. Articles not suitable for the scope of the journal are rejected at this stage.
11. If the articles suit the journal's scope, a referee review is started if there is no significant deficiency. The refereeing invitation period is 1 week, and the referee evaluation period is 2 weeks. The authors are given a minimum of 1 week and a maximum of 4 weeks to make the necessary corrections to the article in line with the opinions of the referees. A minimum of 1 day and a maximum of 7 days is given for the final control phase.
12. If the articles sent to the Furniture and Wooden Material Research Journal have passed the preliminary evaluation stage and have been sent to the referees, they cannot withdraw the article.
13. Each article sent to the journal is reviewed by two referees. If both referees give a positive opinion, the article is accepted. If both referees agree on the negative opinion, the article is rejected. If one of the referees gives a positive opinion and the other a negative opinion, the opinion of a third referee is sought. A decision is made about the articles sent to the journal at the end of three months at the latest.
14. The articles sent to the journal are examined with the iThenticate program for plagiarism.
Ücret Politikası
Dergi hiç bir işlem için ücret talep etmemektedir.
Dizinler
Atıf Dizinleri
Diğer Dizinler
Dergi Kurulları
Baş editör
Editör Kurulu Üyeleri
I am a senior researcher at Department of Wood Industry, Faculty of Applied Sciences, Universiti Teknologi MARA Pahang Branch.
