Mobilya endüstrisinde MDF levhalarda yüzey pürüzlülüğü ve yapışma performansına kesim parametrelerinin etkileri

Öz

Bu çalışmada, farklı yoğunluk seviyelerine sahip orta yoğunluklu lif levhalarda (MDF) kesim parametrelerinin kenar yüzey pürüzlülüğü (Ra) ve Polivinilklorür (PVC) kenar bantlarının yapışma direnci üzerindeki etkileri araştırılmıştır. Deneylerde 18 mm kalınlığında, düşük (0,65 g/cm³) ve yüksek (0,72 g/cm³) yoğunlukta MDF levhalar kullanılmıştır. Kesimler, 96 dişli ATB geometriye sahip daire testere ile 3000 ve 4500 dev/dk dönme hızlarında ve 6, 9, 12 m/dk ilerleme hızlarında gerçekleştirilmiştir. Kesim sonrası yüzey pürüzlülüğü ölçümleri TS EN ISO 21920-2 standardına uygun olarak yapılmış, yapışma direnci ise ASTM D6862 standardına göre 90° soyma testi ile belirlenmiştir. Varyans analizi (ANOVA) sonuçlarına göre yoğunluk, dönme hızı ve ilerleme hızı faktörlerinin hem yüzey pürüzlülüğü hem de yapışma direnci üzerinde istatistiksel olarak anlamlı etkileri bulunmuştur (p < 0,05). Yüksek yoğunluklu MDF, yüksek dönme hızı ve düşük ilerleme hızı koşullarında en düşük Ra (3,91 µm) ve en yüksek yapışma direnci (5,87 N/mm) değerlerini vermiştir. Ayrıca yüzey pürüzlülüğü ile yapışma direnci arasında negatif yönlü güçlü bir korelasyon (r = –0,72; p < 0,001) belirlenmiştir. Sonuç olarak, MDF’nin işlenmesinde özellikle yüksek yoğunluklu levhaların ve yüksek dönme hızı ile düşük ilerleme hızı parametrelerinin seçilmesinin, hem yüzey kalitesini hem de PVC kenar bantlarının yapışma performansını optimize ederek artırdığı ortaya konmuştur.

Anahtar Kelimeler

• MDF
• Yüzey Pürüzlülüğü
• Yapışma Direnci
• Kenar Bantlama

Effects of cutting parameters on surface roughness and adhesion performance of MDF panels in the furniture industry

Öz

In this study, the effects of cutting parameters on edge surface roughness (Ra) and adhesion strength of Polyvinyl Chloride (PVC) edge bands in medium-density fiberboard (MDF) with different density levels were investigated. MDF panels with 18 mm thickness and two density levels (low: 0.65 g/cm³ and high: 0.72 g/cm³) were used in the experiments. Cutting was performed using a 96-tooth circular saw blade with an alternate top bevel (ATB) geometry at spindle speeds of 3000 and 4500 rpm and feed rates of 6, 9, and 12 m/min. Surface roughness was measured according to TS EN ISO 21920-2, while adhesion strength was determined by the 90° peel test in accordance with ASTM D6862. Analysis of variance (ANOVA) revealed that density, spindle speed, and feed rate had statistically significant effects on both surface roughness and adhesion strength (p < 0.05). High-density MDF combined with higher spindle speed and lower feed rate yielded the lowest Ra value (3.91 µm) and the highest adhesion strength (5.87 N/mm). Furthermore, a strong negative correlation was found between surface roughness and adhesion strength (r = –0.72; p < 0.001). Overall, the findings demonstrated that selecting appropriate cutting parameters in MDF processing improves both surface quality and the adhesion performance of PVC edge bands.

Anahtar Kelimeler

• MDF
• Surface Roughness
• Adhesion Strength
• Edge Banding

Kaynakça

1. ASTM D6862-04, (2004). Standard test method for 90 degree peel resistance of adhesives, ASTM International, West Conshohocken, Philadelphia
2. Bal, B. C., and Gündeş, Z., (2020). Surface roughness of medium-density fiberboard processed with CNC machine, Measurement, 153, 107421, DOI: 10.1016/j.measurement. 2019.107421
3. Budhe, S., Banea, M. D., de Barros, S., and da Silva, L. F. M., (2015a). An updated review of adhesively bonded joints in composite materials, International Journal of Adhesion and Adhesives, 57, 70–96, DOI: 10.1016/j.ijadhadh.2016.10.010 Budhe, S., Ghumatkar, A., Birajdar, N., and da Silva, L. F. M., (2015b). Effect of surface roughness using different adherent materials on the adhesive bond strength, Applied Adhesion Science, 3(20), 1–13, DOI: 10.1186/s40563-015-0050-4
4. Davim, J. P., Clemente, V. C., and Silva, S.3 (2009). Surface roughness aspects in milling MDF (medium density fibreboard), The International Journal of Advanced Manufacturing Technology, 40(1–2), 49–55, DOI: 10.1007/s00170-007-1318-z
5. Demir, A., Birinci, A. U., and Öztürk, H., (2021). Determination of the surface characteristics of medium density fibreboard processed with CNC machine and optimisation of CNC process parameters by using artificial neural network, CIRP Journal of Manufacturing Science and Technology, 35, 929–942, DOI: 10.1016/j.cirpj.2021.10.005
6. Frihart, C. R., (2005). Wood adhesion and adhesives, In Handbook of wood chemistry and wood composites (pp. 215–278), CRC Press
7. Gül, O., and Korkmaz, M., (2025). Measurement and optimization of wood dust and noise levels in table saw operations using response surface methodology, BioResources, 20(1), 55–67, DOI: 10.15376/biores.20.4.8848-8862
8. Hiziroglu, S., and Suzuki, S., (2007). Evaluation of surface roughness of commercially manufactured particleboard and medium density fiberboard in Japan, Journal of Materials Processing Technology, 184(1-3), 436-440, DOI: 10.1016/j.jmatprotec.2006.11.011

9. İşleyen, Ü. K., and Karamanoğlu, M., (2019). The influence of machining parameters on surface roughness of MDF in milling operation, BioResources, 14(2), 3266–3277, DOI: 10.15376/biores.14.2.3266-3277
10. Karaman, A., (2021). Effects of wooden-dowel species, edge banding thickness, and adhesive types on withdrawal strength in MDF-Lam, Wood Material Science and Engineering, 16(4), 269–278, DOI: 10.1080/17480272.2021.1881999
11. Karaman, A., Yeşil, H., and Yazıcı, H., (2025). Effect of edge banding thickness, dowels, and adhesive types on withdrawal strength in oriented strand board, BioResources, 20(3), 5664–5677, DOI: 10.15376/biores.20.3.5664-5677
12. Koc, K. H., Hazir, E., and Şeker, S., (2025). Optimization of edge banding process parameters used for particle board and medium density fibreboard, BioResources, 20(1), 1915–1930, DOI: 10.15376/biores.20.1.1915-1930 Korkmaz, M., Budakçı, M., and Kılınç, İ., (2024). Assessment of surface roughness in milling of wood with different material temperature and cutting parameters, BioResources, 19(4), 9343–9357, DOI: 10.15376/biores.19.4.9343-9357
13. Kúdela, J., (2020). Surface properties of a medium density fibreboard evaluated from the viewpoint of its surface treatment, Acta Facultatis Xylologiae Zvolen, 62(2), 35–45, DOI: 10.17423/afx.2020.62.2.04
14. Kúdela, J., and Liptáková, E. (2006). Adhesion of coating materials to wood. Journal of adhesion science and technology, 20(8), 875-895., DOI: 10.1163/156856106777638725
15. Kureli, I., and Doganay, S., (2015). The effects of surface roughness, adhesive type, and veneer species on pull-off strength of laminated medium density fibreboard, BioResources, 10(1), 1293–1303
16. Li, W., Zhang, Z., and Peng, X., (2017). The influences of circular saws with sawteeth of mic-zero-degree radial clearance angles on surface roughness in wood rip sawing, Annals of Forest Science, 74(37), 1–10, DOI: 10.1007/s13595-017-0632-3
17. Özdemir, T., Hiziroglu, S., and Malkocoglu, A., (2009). Influence of relative humidity on surface quality and adhesion strength of coated medium density fiberboard (MDF) panels, Materials and Design, 30(7), 2543–2546, DOI: 10.1016/j.matdes.2008.09.036
18. Palija, T., Jaic, M., and Dzincic, İ., (2019). The impact of sanding system on the surface roughness of medium density fibreboard, Wood Industry and Engineering, 1(1), 27-32
19. Rudawska, A., Stančeková, D., Müller, M., Vitenko, T., and Iasnii, V., (2020). The strength of the adhesive joints of the medium-density fibreboards and particle boards with the PVC film, Materials, 14(1), 58–68, DOI: 10.12913/22998624/113612
20. Sütcü, A., and Karagöz, Ü., (2012). Effect of machining parameters on surface quality after face milling of MDF, Wood Research, 57(2), 231–240
21. TS EN ISO 21920-2, (2022). Geometrik ürün özellikleri (GPS) – Yüzey pürüzlülüğü: Profil – Bölüm 2: Terimler, tanımlar ve parametreler, Ankara.
22. Vlaović, Z., Gržan, T., Župčić, I., Domljan, D., and Mihulja, G., (2024). Strength, durability, and aesthetics of corner joints and edge banding in furniture design: A review, Applied Sciences, 14(22), 10285, DOI: 10.3390/app142210285