Hidrotermal Yöntem ile Nano-Perlit Takviyeli Nano-Hidroksiapatit Sentezi ve Karakterizasyonu

Öz

Bu çalışmada, nano-perlit takviyeli nano-hidroksiapatit biyokompozitler kontrollü bir hidrotermal yöntemle sentezlenmiştir. Ham perlitten SPEX öğütme ile elde edilen nano-perlit, %1–4 ağırlık oranlarında hidroksiapatit yapısına dâhil edilmiştir. Kalsiyum nitrat tetrahidrat ve diamonyum hidrojen fosfat sulu ortamda nano-perlit ile homojenleştirilmiş ve 180 °C’de 10 saat hidrotermal işleme tabi tutulmuştur. Elde edilen numuneler SEM, EDS, Zeta potansiyeli, XRD ve FTIR teknikleriyle karakterize edilmiştir. Sonuçlar, %2–3 nano-perlit ilavesinin kalsiyum silikat ve kalsiyum fosfat gibi biyolojik olarak aktif fazların oluşumunu teşvik ettiğini göstermiştir. Artan perlit içeriği, Si–O–Si, Ca–P, OH⁻ ve PO₄³⁻ titreşim bantlarının şiddetini artırarak yapısal ve fonksiyonel modifikasyonu doğrulamıştır. Nano-perlitin, ekonomik ve sürdürülebilir bir faz düzenleyici ve takviye malzemesi olarak biyomalzeme uygulamaları için umut vadettiği gösterilmiştir.

Anahtar Kelimeler

• Hidroksiapatit
• Hidrotermal yöntem
• Nano-biyokompozitler
• Perlit

Hydrothermal Synthesis and Characterization of Nano-Perlite Reinforced NanoHydroxyapatite

Öz

This study presents the hydrothermal synthesis of nano-perlite reinforced nano-hydroxyapatite biocomposites for biomedical applications. Nano-perlite, produced from raw perlite via SPEX milling, was incorporated into hydroxyapatite at 1–4 wt.% ratios. Calcium nitrate tetrahydrate and diammonium hydrogen phosphate were dispersed with nano-perlite in aqueous media and subjected to hydrothermal treatment at 180 °C for 10 h. The synthesized composites were characterized using SEM, EDS, zeta potential analysis, XRD, and FTIR. The results demonstrated that 2–3 wt.% nano-perlite promoted the formation of bioactive phases such as calcium silicate and calcium phosphate. Increasing perlite content enhanced the intensities of Si–O–Si, Ca–P, OH⁻, and PO₄³⁻ vibrational bands, indicating structural modification and improved functional group development. The findings highlight nano-perlite as an effective reinforcing and phase-modifying agent, offering a cost-effective and sustainable alternative to conventional bioactive materials for next-generation biomaterial applications.

Anahtar Kelimeler

• Hydroxyapatite
• Hydrothermal method
• Nano-biocompozites
• Perlite

Kaynakça

1. [1] Peters, M., Leyens, C. Titanium and Titanium Alloys: Fundamentals and Applications. In Titanium and Titanium Alloys Fundamentals and Applications. https://doi.org/10.1002/3527602119. 2003.
2. [2] Ratner, B. D., Hoffman, A. S., Schoen, F. J., Lemons, J. E. Biomaterials Science: An Introduction to Materials: Third Edition. In Biomaterials Science: An Introduction to Materials: Third Edition. https://doi.org/10.1016/B978-0-08-087780-8.00148-0. 2013.
3. [3] Bauer, S., Schmuki, P., Von Der Mark, K., Park, J. Engineering biocompatible implant surfaces Part I: materials and surfaces. Prog. Mater Sci. 58, 261–326. 2013.
4. [4] Gerhardt, L. C., Boccaccini, A. R. Bioactive glass and glass-ceramic scaffolds for bone tissue engineering. Materials, 3(7), 3867-3910. 2010.
5. [5] Kılınç, Ö., Toplan, N., Biyoaktif Cam ve Cam Seramikler, Koc. Üni. Fen Bil. Der., 6(2), 89˗110, 2023.
6. [6] Boudemagh, D. Venturini, P. Fleutot, S. Cleymand, F., Elaboration of hydroxyapatite nanoparticles and chitosan/hydroxyapatite composites: a present status, Polym. Bull. https://doi.org/10.1007/s00289-018-2483-y. 2019.
7. [7] Sadat-Shojai, M., Khorasani, M. T., Dinpanah-Khoshdargi, E., Jamshidi, A. Synthesis methods for nanosized hydroxyapatite with diverse structures, Acta Biomater. https://doi.org/10.1016/j.actbio.2013.04.012. 2013.
8. [8] Karip, E., Muratoğlu, M. A study on using expanded perlite with hydroxyapatite: Reinforced bio-composites, Proc IMechE Part H: J Engineering in Medicine, Vol. 235(5) 574–582. 2021.

9. [9] Gunduz O, Ahmaz Z, Ekren N, et al. Reinforcing of biologicallyvderived apatite with commercial inert glass. J. Thermoplast Compos Mater 22: 407–419, 2009.
10. [10] Demirkol N, Oktar FN and Kayali ES. Influence of commercial inert glass addition on the mechanical properties of commercial synthetic hydroxyapatite. Acta Phys Pol A, 123: 427–429, 2013.
11. [11] Salman S, Oktar FN, Gunduz O, et al. Sintering effect on mechanical properties of composites made of bovine hydroxyapatite (BHA) and commercial inert glass (CIG). Key Eng Mater, 330–332: 189–192, 2007.
12. [12] Cetiner BN and Erkmen ZE. Production and characterization of bioglass-Titania reinforced hydroxyapatite composite. Key Eng Mater, 493–494: 566–571, 2012.
13. [13] Silva MHP, Lemos AF, Ferreira JMF, et al. Mechanical characterisation of porous glass reinforced hydroxyapatite ceramics-Bonelike. Mater Res., 6(3): 321–325, 2013.
14. [14] Reka AA, Pavlovski B, Lisichkov K, et al. Chemical, mineralogical and structural features of native and expanded perlite from Macedonia. Geol Croat, 72(3): 215–221, 2019.
15. [15] von Walter M, Ru¨ ger M, Ragoß C, et al. In-vitro behavior of a porous TiO2/perlite composite and its surface modification with fibronectin. Biomaterials, 26: 2813–2826, 2005.
16. [16] de Oliveira AG, Jandorno JC Jr, da Rocha EB, et al. Evaluation of expanded perlite behavior in PS/Perlite composites. Appl Clay Sci., 181: 105223, 2019.
17. [17] Buyuksagis A. The coating of hydroxyapatite (HAP) on 316L stainless steel and Ti6Al4V alloy use by sol-gel method. Electron J Mach Technol, 7(1): 1–11, 2010.
18. [18] http://minerals. usgs.gov alındığı tarih: 15.09.2006.
19. [19] Kawamura, Y., Yoshida, H., Asai, S., Kurahashi, I., Tanibe, H. Effect of Chitosan Concentration and Precipitation Bath Concentration and Precipitation Bath Concentration on the Material Properties of Porous Crooslinked Chitosan Beads, Seperation Science and Technology, 32, 1959-1974, 2002.
20. [20] Daldiken, E., Koçak, F. Z., küçükdeveci, N. Synthesis and characterisations of clinoptilolite enriched hydroxyapatite nanoceramics by sol-gel route for bone regeneration, Ceramics International, 50, 19650-19659, 2024.
21. [21] O. Mekmene, S. Quillard, T. Rouillon, J.M. Bouler, M. Piot, F. Gaucheron, Effects of pH and Ca/P molar ratio on the quantity and crystalline structure of calcium phosphates obtained from aqueous solutions, içinde: Dairy Sci. Technol., https://doi.org/10.1051/dst/2009019. 2009.
22. [22] Bigi, A., Fini, M., Bracci, B., Boanini, E., Torricelli, P., Giavaresi, G., Aldini, N. N., Facchini, A., Sbaiz, F., Giardino, R. The response of bone to nanocrystalline hydroxyapatite-coated Ti13Nb11Zr alloy in an animal model, Biomaterials. https://doi.org/10.1016/j.biomaterials.2007.12.011. 2008.
23. [23] Güler, S, H., Güler, Ö. The Investigation of Properties and Production of CNT and BNNT Reinforced ZnO Nanocomposites, MAUN J. of Sci., 5 (2), 465-469, 2019.
24. [24] Somiya, S., Roy, R. Hydrothermal synthesis of fine oxide powders. Bulletin of Material Science, 23, ss. 453-460, 2000.
25. [25] Akkaya Sayğılı, G., Sayğılı, H. Co-conversion of Industrial Biowaste Mixtures by Hydrothermal Method and Application to Cu2+ Adsorption, MAUN J. of Sci., 11 (2), 33-39, 2023.
26. [26] Jia, B., Gao, L. Synthesis and characterization of single crystalline PbO nanorods via a facile hydrothermal method. Materials Chemistry and Physics, 100 (2-3), ss. 351-354, 2006.
27. [27] Spoerk, M., Sapkota, J., Weingrill, G., Fischinger, T., Arbeiter, F., Holzer, C. Shrinkage and Warpage Optimization of Expanded-Perlite-Filled Polypropylene Composites in Extrusion-Based Additive Manufacturing. Macromolecular Materials Engineering, 302, 1-13, 2017.
28. [28] Atagür, M., Sarikanat, M., Uysalman, T., Polat, O., Elbeyli, İ. Y., Seki, Y., Sever, K. Mechanical, thermal, and viscoelastic investigations on expanded perlite–filled high-density polyethylene composite. Journal of Elastomers & Plastics, 50(8), 747-761, 2018.
29. [29] 29Sahraeian, R., Hashemi, S, A., Esfandeh, M., Ghasemi, I. Preparation of Nanocomposites Based on LDPE/Perlite: Mechanical and Morphological Studies, Polymers & Polymer Composites, Vol. 20, No. 7, 639-646, 2012.
30. [30] Kothapalli, C, R., Shaw, M, T., Wei, M. Biodegradable HA-PLA 3-D porous scaffolds: Effect of nano-sized filler content on scaffold properties, Acta Biomaterialia 1, 653–662, 2005.
31. [31] Kothapalli, C, R., Wei, M., Legeros, R, Z., Shaw, M, T. Influence of temperature and aging time on HA synthesized by the hydrothermal method, Journal Of Materıals Scıence: Materıals In Medıcıne, 1 (6), 441-446, 2005.
32. [32] Venkatesan, J., Kim, S. K. Nano-Hydroxyapatite Composite Biomaterials for Bone Tissue Engineering-A Review. Journal of Biomedical Nanotechnology, 10 (10), ss. 3124-3140, 2014.
33. [33] Lin, K., Chang, J. Structure and properties of hydroxyapatite for biomedical applications, Hydroxyapatite (Hap) for Biomedical Applications 1, 3-19, 2015.
34. [34] 34Terzioğlu, P., Kalemtaş, A. Polylactic Acid-Hydroxyapatite Composites for Bone Tissue Engineering Applications, ResearchGate, 20-28, 2017.
35. [35] Evis, Z. Al+3 Doped Nano Hydroxyapatites And Their Sintering Characteristics, Journal of the Ceramic Society of Japan 114, 1001-1004, 2006.
36. [36] Elliott, J, C., Wilson R. M., Dowker S. E. P. Apatite structures, Advances in X–Ray Analysis, 45, 172–181, 2002.
37. [37] Guo S. L., Chen B. L., Durrani S. A. Chapter 4–Solid–state nuclear track detectors, Handbook of Radioactivity Analysis, 3rd Edition, 233–298, 2012.
38. [38] Abifarin, J, K., Prakash, C., Singh, S. Optimization and significance of fabrication parameters on the mechanical properties of 3D printed Chitosan/PLA scaffold. Materials Today: Proceedings, 50, 2018-2025, 2022.
39. [39] Aminian A., Hashjin M.H., Samadikuchcksaraei A., Bakhshi F., Gorjipour F., Farzadi A., Moztarzadeh F., Schmücker M. Synthesis of silicon-substituted hydroxyapatite by a hydrothermal method with two different phosphorous sources, Ceram. Int., 37: 1219– 1229, 2011.
40. [40] Honda M., Kikushima K., Kawanobe Y., Mizumoto N., Bizava M. Enhanced Early Ostegenic Differentiation By Silicon Substituted Hydroxyapatite Ceramics Fabricated Via Ultrasonic Spray Pyrolsisis Route, J. on Mater. Sci.: Mater. in Medicine, 23: 2923– 2932, 2012.
41. [41] Ergöz Güngör, F., Karasu, B. The Effects of Silicon Addition to Bioceramic Composition on the Osteoconductive and Osteoinductive Properties, El-Cezerî Journal of Science and Engineering Vol: 7, No: 2, 724-742, 2020.
42. [42] Yanling Z., Wu C., Chang J. Bioceramics to Regulate Stem Cells and Their Microenvironment for Tissue Regeneration, Materials Today, 24: 41–56, 2019.
43. [43] Angervall, L., Berger, S., Röckert, H. A Mıcroradıographıc And X‐Ray Crystallographıc Study Of Calcıum In The Pıneal Body And In Intracranıal Tumours, Acta Pathol. Microbiol. Scand. https://doi.org/10.1111/j.1699-0463.1958.tb01060.x. 1985.
44. [44] Ofudje, E. A., Rajendran, A. Adeogun, A. I., Idowu, M. O., Kareem, S. O., Pattanayak, D. K. Synthesis of organic derived hydroxyapatite scaffold from pig bone waste for tissue engineering applications, Adv. Powder Technol. https://doi.org/10.1016/j.apt.2017.09.008, 2018.
45. [45] Güngör Koç, S., Pumice and perlite co-substituted hydroxyapatite: Fabrication and characterization, MANAS Journal of Engineering, 8 (2), 1694-7398, 2020.
46. [46] Evis, Z., Çeşitli İyonlar Eklenmiş Nano Hidroksiapatitler: Üretim Yöntemleri, İç Yapı, Mekanik ve Biyouyumluluk Özellikleri Yönlerinden İncelenmesi, International Journal of Research and Development, Vol.3 (1), 55-61, 2011.
47. [47] Gürbüz, H., Demir, M. E., Baday, Ş., Akcan, İ. H. Investigation of Mechanical Properties and Machinability of Unfilled and Gr/B4C Filled Hybrid Composites, MAUN J., of Sci., 12(2), 182-191, 2024.
48. [48] Özkahraman, B., Acar, I., Gök, M, K., Güçlü, G. Optimization of Synthesis Conditions of Poly(N-Vinylcaprolactam) Microgels, Afyon Kocatepe University Journal of Science and Engineering, 14 (011201), 13-21.https://bilsenbesergil.blogspot.com/p/monodispers-monodisperse.html, 2014.
49. [49] Yaghoobi, H., Fereidoon, A. Preparation and characterization of short kenaf fiberbased biocomposites reinforced with multi-walled carbon nanotubes. Composites Part B: Engineering, 162:314–22. https://doi.org/10.1016/j.compositesb.2018.11.015, 2019.
50. [50] Tuzlakoglu, K., Bolgen, N., Salgado, A.J., Gomes, M.E. Nano-and Micro-Fiber Combined Scaffolds: A New Architecture for Bone Tissue Engineering. Journal of Materials Science: Materials in Medicine, (12), 1099- 1104, 2005.
51. [51] Elnashar, M. M. Immobilized molecules using biomaterials and nanobiotechnology. Journal of Biomaterials and Nanobiotechnology, 1(01), 61-68, 2010.
52. [52] Fernandes H. R., Gaddam A., Rebelo A., Brazete D., Stan E. G., Ferreira J. M. F. Bioactive Glasses and Glass–Ceramics for Healthcare Applications in Bone Regeneration and Tissue Engineering, Materials (Basel), 11(12): 2530, 2018.
53. [53] Roh J., Kim J. Y., Choi Y. M., Ha S. M., Kim K. N., Kim K. M. Bone regeneration using a mixture of silicon–substituted coral HA and β-TCP in a rat calvarial bone defect model, Materials, 2: 97, 2016.
54. [54] Prabhakar A, M JP, Basappa N. Comparative Evaluation of the Remineralizing Effects and Surface Micro hardness of Glass Ionomer Cements Containing Bioactive Glass (S53P4):An in-vitro Study. Int J Clin Pediatr Dent, 3:69, 2010.
55. [55] Vicente A, Rodríguez-Lozano FJ, Martínez-Beneyto Y, Jaimez M, Guerrero-Gironés J, Ortiz-Ruiz AJ, et al. Biophysical and Fluoride Release Properties of a Resin Modified Glass Ionomer Cement Enriched with Bioactive Glasses. Symmetry, 13:494, 2021.
56. [56] Valanezhad A, Odatsu T, Udoh K, Shiraishi T, Sawase T, Watanabe I. Modification of resin modified glass ionomer cement by addition of bioactive glass nanoparticles. J Mater Sci Mater Med 2016;27:1–9, 2016.
57. [57] Odermatt R, Par M, Mohn D, Wiedemeier DB, Attin T, Tauböck TT. Bioactivity and Physico-Chemical Properties of Dental Composites Functionalized with Nano- vs. Micro-Sized Bioactive Glass. J Clin Med, 9, 772, 2020.
58. [58] Polat, H., Taygar, A. Effect of Using Siderite Mineral as a Reinforcement Material on the Physical, Mechanical, and Durability Properties of Polymer Composites, MAUN J. of Sci., 13(1), 165-173, 2025.
59. [59] Yli-Urpo H, Lassila LVJ, Närhi T, Vallittu PK. Compressive strength and surface characterization of glass ionomer cements modified by particles of bioactive glass. Dent Mater, 21. 201–9, 2005.
60. [60] Bouslama, N., Ayed, F.B., and Bouaziz, J. Sintering and Mechanical Properties of Tricalcium Phosphate –Fluorapatite Composites. Ceramics International, 35,1909-1917, 2009.
61. [61] Pasinli, A., Aksoy, R. S. Yapay Kemik Uygulamaları İçin Hidroksiapatit. BiyoTeknoloji Elektronik Dergisi, 1(1), 41–51, 2010.
62. [62] Kim, D. H., Kim, T. W., Lee, J. D., Shin, K. K., Jung, J. S., Hwang, K. H., Lee, J. K., Park, H. C., Yoon, S. Y. Preparation and In Vitro and In Vivo Performance of Magnesium Ion Substituted Biphasic Calcium Phosphate Spherical Microscaffolds as Human Adipose Tissue-Derived Mesenchymal Stem Cell Microcarriers, Journal of Nanomaterials, http://dx.doi.org/10.1155/2013/762381, 2013.
63. [63] Güngör Koç, S., Ahmed R. W. Fabrication and Characterization of Nano-TCP Doped with Various Ions for Bone Implant Applications, Journal of the Institute of Science and Technology, 9 (4), 2181-2189, 2019.
64. [64] Parirokh, M., Torabinejad, M., Dummer, P. Mineral trioxide aggregate and other bioactive endodontic cements: an updated overview–part I: vital pulp therapy. International endodontic journal, 51(2): 177-205, 2018.
65. [65] Carlisle M. Silicon, trace elements in human and animal nutrition, Editor: Mertz W., Academic Press. 1986.
66. [66] Aydın, G., Parın F, N., Yıldırım, K., Kalemtaş, A. Production and Characterization of Dicalcium Silicate Based Tissue Scaffolds via Starch Consolidation Method, Afyon Kocatepe University Journal of Science and Engineering, 19, 117124, 2019.
67. [67] Ibrahimzade, L., Kaygili, O., Dundar, S., Ates, T., Dorozhkin, S., & Bulut, N. et al. Theoretical and experimental characterization of Pr/Ce co-doped hydroxyapatites. Journal Of Molecular Structure, 1240, 130557, 2021.
68. [68] Kaygili, O., Vural, G., Keser, S., Yahia, I., Bulut, N., & Ates, T. et al. Ce/Sm co-doped hydroxyapatites: synthesis, characterization, and band structure calculation. Journal of the Australian Ceramic Society, 57(1), 305-317, 2020.
69. [69] Mahmood, B., Kaygili, O., Bulut, N., Dorozhkin, S., Ates, T., & Koytepe, S. et al. Effects of strontium - erbium co-doping on the structural properties of hydroxyapatite: An Experimental and theoretical study. Ceramics International, 46(10), 16354-16363, 2020.
70. [70] Matos MC, Ilharco LM, Almeida RM. The evolution of TEOS to silica gel and glass by vibrational spectroscopy. J Non-Cryst Solids. 1992;147:232–237, 1992.
71. [71] Adams, L. A. Essien, E. R. Kaufmann, E. E. Kaufmann. A new route to sol-gel crystalline wollastonite bioceramic, Journal of Asian Ceramic Society, vol.6 (2), 132-138, 2018.
72. [72] Kaygili, O., Keser, S., Bulut, N., & Ates, T. Characterization of Mg-containing hydroxyapatites synthesized by combustion method. Physica B: Condensed Matter, 537, 63-67, 2018.
73. [73] İnce, T., Kaygili, O., Tatar, C., Bulut, N., Koytepe, S., & Ates, T. The effects of Ni-addition on the crystal structure, thermal properties and morphology of Mg-based hydroxyapatites synthesized by a wet chemical method. Ceramics International, 44(12), 14036-14043, 2018.
74. [74] Kaygili, O., Keser, S., Selçuk, A., Bulut, N., Koytepe, S., Yahia, I., & Ates, T. The effects of gamma irradiation on dielectric properties of Ag/Gd co-doped hydroxyapatites. Journal of Materials Science: Materials in Electronics, 30(11), 10443-10453, 2019.
75. [75] Carrodeguas, R, G., Aza, D. α-Tricalcium phosphate: synthesis, properties and biomedical applications, Acta Biomater, 7, pp. 3536-3546, 2011.
76. [76] Tripathi, G., Ishikawa, K. Materials Science & Engineering C Fabrication and in-vitro dissolution evaluation of low-crystalline β -TCP blocks through aqueous1, Materials Science & Engineering C, 101, pp. 228-231, 2019.
77. [77] Sayer, M., Stratilatov, A, D., Reid, J. Calderin, L., Stott, M, J, Yin, X., MacKenzie, M., Smith, T, J, N., Hendry, J, A., Langstaff, S, D. Structure and composition of silicon-stabilized tricalcium phosphate, Biomaterials., 24, pp. 369-382, 2003.