Effect of Multi-Walled Carbon Nanotubes on the Water-Based Drilling Muds

Yıl 2018, Cilt: 6 Sayı: 2, 591 - 594, 24.12.2018

Abdullah Özkan

Öz

This study aims to investigate of the effect of multi-walled carbon nanotubes (MWCNTs) that production by chemical vapor deposition (CVD) on the performance of water-based drilling muds (WBDM). MWCNT was added to WBDM at 0.001, 0.005, 0.01, 0.05 and 0.1 % w/v. The rheological properties of the MWCNTs added drilling fluid were determined according to the API standarts. The drilling muds at different ratios of MWCNTs addition are compared with each other, it is found that 0.1 % of MWCNTs added drilling mud has the best properties. Multi-Walled Carbon Nanotubes, Water based drilling mud, Rheological properties

Anahtar Kelimeler

Multi-Walled Carbon Nanotubes, Water based drilling mud

Çok Duvarlı Karbon Nanotüplerin Su Bazlı Sondaj Çamurlarına Etkisi

Öz

Bu
çalışmada, kimyasal buhar biriktirme yöntemi (CVD) ile üretilen çok-duvarlı
karbon nanotüplerin (MWCNTs), su bazlı sondaj çamurlarının (WBDM) performansı
üzerine  etkisinin araştırılması
amaçlanmıştır. 0.001, 0.005, 0.01, 0.05 and 0.1 % w/v oranında MWCNTs eklenmiş
WBDM’lerin reolojik özellikleri API standartlarına göre tespit edilmiştir.
Analiz sonuçları MWCNTs’nin iyi bir katkı maddesi olduğunu göstermiştir. Ayrıca
farklı oranlarda MWCNTs eklemesi sonucu elde edilen WBDM’ler kendi içlerinde
karşılaştırıldığında, en iyi katkılama oranının % 0.1 w/v olduğu görülmüştür.

Anahtar Kelimeler

Çok Duvarlı Karbon Nanotüp, Su Bazlı Sondaj Çamuru

Kaynakça

• [1] Bourgoyne Jr A.T., Millheim K.K., Chenevert M.E., Young JrF. S. Applied Drilling Engineering. Society of Petroleum Engineers, Richardson, TX, Second Ed. Louisiana, State U. p. 42-82, 1991.
• [2] Amanullah M., Arfaj M.K., Abdullati Z.A. Effect of CuO and ZnO nanofluids in xanthan gum on thermal, electrical and high pressure rheology of water-based drilling fluids. Journal of Petroleum Science and Engineering, 117 1-9, 2011.
• [3] Zhong H., Qiu Z., Huang W., Cao J. Shale inhibitive properties of polyether diamine in water-based drilling fluid. Journal of Petroleum Science and Engineering, 78 510-515, 2011.
• [4] Amanullah Md., Yu L. Environment friendly fluid loss additives to protect the marine environment from the detrimental effect of mud additives. Journal of Petroleum Science and Engineering, 48 199-208, 2005.
• [5] Gentzis T., Deisman N., Chalaturnyk R.J. Effect of drilling fluids on coal permeability: Impact on horizontal wellbore stability. International Journal of Coal Geology, 78 177-191, 2009.
• [6] Fink J. Petroleum engineer's guide to oil field chemicals and fluids. Gulf Professional Publishing, 2011.
• [7] Agi A,. Junin R., Gbadamosi A. Mechanism governing nanoparticle flow behaviour in porous media: insight for enhanced oil recovery applications. International Nano Letters, 8 1-29, 2018.
• [8] Franco C.A., Zabala R., Cortés, F.B. Nanotechnology applied to the enhancement of oil and gas productivity and recovery of Colombian fields. Journal of Petroleum Science and Engineering, 157 39-55, 2017.
• [9] Gbadamosi A.O., Junin R., Manan M.A., Yekeen N., Agi A., Oseh J.O. Recent advances and prospects in polymeric nanofluids application for enhanced oil recovery. Journal of Industrial and Engineering Chemistry, 1-16, 2018a.
• [10] Yekeen N., Manan M. A., Idris A. K., Padmanabhan E., Junin R., Samin A.M., Gbadamosi A.O., Oguamah I.A comprehensive review of experimental studies of nanoparticles-stabilized foam for enhanced oil recovery. Journal of Petroleum Science and Engineering, 164 43-74, 2018.
• [11] Gbadamosi A. O., Junin R., Abdalla Y., Agi A., Oseh, J.O. Experimental investigation of the effects of silica nanoparticle on hole cleaning efficiency of water-based drilling mud. Journal of Petroleum Science and Engineering, 2018b.
• [12] Afolabi R. O., Orodu O. D., Seteyeobot I. Predictive modelling of the impact of silica nanoparticles on fluid loss of water based drilling mud. Applied Clay Science, 151 37-45, 2018.
• [13] Smith S.R., Rafati R., Haddad A.S., Cooper A., Hamidi H. Application of aluminium oxide nanoparticles to enhance rheological and filtration properties of water based muds at HPHT conditions. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 537 361-371, 2018.
• [14] Abdo J., Haneef M.D. Nano-Enhanced Drilling Fluids: Pioneering Approach to Overcome Uncompromising Drilling Problems. Journal of Energy Resources Technology, 134 014501, 2012.
• [15] Bég O.A., Espinoza D.S., Kadir A., Shamshuddin M.D., Sohail A. Experimental Study of Improved Rheology and Lubricity of Drilling Fluids Enhanced with Nano-particles. Applied Nanoscience. 8 1-22, 2018.
• [16] Xing M., Yu J., Wang R. Experimental study on the thermal conductivity enhancement of water based nanofluids using different types of carbon nanotubes. International journal of heat and mass transfer, 88 609-616, 2015.
• [17] Alvi M. A.A., Belayneh M., Saasen A., Fjelde K.K., Aadnøy B. S. Effect of MWCNT and MWCNT Functionalized -OH and -COOH Nanoparticles in Laboratory Water Based Drilling Fluid. ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. OMAE2018-78702, p. V008T11A069, 2018.
• [18] API recommended practice 13B-1. API Standard Practice for Field Testing of Water-based Drilling Fluids, 2009.
• [19] Couteau E., Hernadi K., Seo J.W., Thien-Nga L., Miko Cs., Gaal R., Forro L. CVD synthesis of high-purity multiwalled carbon nanotubes using CaCO3 catalyst support for large-scale production. Chemical Physics Letters, 378 9-17, 2003.
• [20] Shah S.N., Shanker N.H., Ogugbue C.C. Future challenges of drilling fluids and their rheological measurements. In AADE fluids conference and exhibition, Houston, Texas, 2010.
• [21] API, 13A. Specification for Drilling Fluid Materials. American Petroleum Intitute, ANSI/API 13A/ISO 13500, 2010.
• [22] Aftab A., Ismail A.R., Khokhar S., Ibupoto Z. H. Novel zinc oxide nanoparticles deposited acrylamide composite used for enhancing the performance of water-based drilling fluids at elevated temperature conditions. Journal of Petroleum Science and Engineering, 146 1142-1157, 2016.
• [23] Kelessidis V.C., Tsamantaki C., Pasadakis N., Repouskou E., Hamilaki E. Permeability, porosity and surface characteristics of filter cakes from water–bentonite suspensions. Computational Methods in Multiphase Flow IV, WIT Transactions on Engineering Sciences, WIT Press, Southampton, UK, 56 173-182, 2007.
• [24] Guo J., Yan J., Fan W., Zhang H. Applications of strongly inhibitive silicate-based drilling fluids in troublesome shale formations in Sudan. Journal of Petroleum Science and Engineering, 50 195-203, 2006.
• [25] Nabhani N., Emami M. The Potenıal Impact of Nanomaterıals in Oıl Drıllıng Industry. NANOCON, Brno, Czech Republic, EU, 2012.
• [26] Bailey L., Boek E., Jacques S., Boassen T., Selle O., Statoil, Argillier J.F., Longeron D. Particulate invasion from drilling fluids. European Formation Damage Conference, 5:4 412-419, 2000.