Mechanical Abrasion of Mortars Containing Clinoptilolite
Öz
In this study, it was investigated on the mechanical abrasion of mortars containing natural zeolite clinoptilolite. Bohme surface abrasion tests were carried out to cement mortar samples produced with different cement replacement ratio (0%, 10%, 30% and 50%). The mechanical abrasion of mortars was determined according to TS 2824 EN 1338. The results obtained from test series were compared with each other. The test results showed that, abrasion losses of mortars containing clinoptilolite were lower than portland cement mortar as approximately 15%.
Anahtar Kelimeler
Kaynakça
- Chan, SYN. and Ji, X., “Comparative study of the initial surface absorption and chloride diffusion of high performance zeolite, silica fume and PFA concretes”, Cem. Concr. Compos., 21:293–300, 1999
- Özen, S., Göncüoğlu, M. C., Liguori, B., Gennaro, B., Cappelletti, P., Gatt, G. D., Iucolano, F., and Colella, C., “A comprehensive evaluation of sedimentary zeolites from Turkey as pozzolanic addition of cement- and lime- based binders”, Construction and Building Materials, 105, 46-61, 2016
- Bilim, C., “Zeolit Katkısının Harçların Aşınma Direncine Etkisi”, 6th International Advanced Technologies Symposium (IATS’11), Elazığ, Turkey, 2011
- Gabriel C., Rajwant S. B., Yushan Y., and Junlan W., “Zeolite as a wear-resistant coating”, Microporous and Mesoporous Materials, 151, 346–351, 2012
- Akgün, Y., and Yazıcıoğlu, Ö. F., “İki Farklı Doğal Zeolit Katkısının Çimento Harç Aşınma Dayanımına Etkisi”, Ordu Üniv. Bil. Tek. Derg., Cilt:6, Sayı:1, 94-104, 2016
- TS EN 197–1, (2002). Çimento - Bölüm 1: Genel Çimentolar- Bileşim, Özellikler ve Uygunluk Kriterleri. Ankara: Türk Standartları Enstitüsü.
- TS EN 196–1, (2009). Çimento Deney Metotları - Bölüm 1: Dayanım Tayini. Ankara: Türk Standartları Enstitüsü.
- TS EN 934-2, (2013). Kimyasal Katkılar - Beton, Harç ve Şerbet için - Bölüm 2: Beton Kimyasal Katkıları - Tarifler, Gerekler, Uygunluk, İşaretleme ve Etiketleme, Ankara: Türk Standartları Enstitüsü.
Ayrıntılar
Birincil Dil
İngilizce
Konular
Mühendislik
Bölüm
Konferans Bildirisi
Yayımlanma Tarihi
30 Haziran 2019
Gönderilme Tarihi
24 Temmuz 2018
Kabul Tarihi
5 Şubat 2019
Yayımlandığı Sayı
Yıl 2019 Cilt: 8 Sayı: 1